Influence of oxide metallurgy and pulsed magnetic field parameters on steel microstructure
ZHU Li-guang1, ZHENG Shi-wei2, ZHANG Qing-jun2,3, CAO Sheng-li2,3
1. Hebei University of Science and Technology, Shijiazhuang 050018, Hebei, China;
2. Hebei High Quality Steel Continuous Casting Engineering Technology Research Center, College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063009, Hebei, China;
3. Analysis and Testing Center, North China University of Science and Technology, Tangshan 063210, Hebei, China
Abstract：Pulsed magnetic field treatment and oxide metallurgy technology are two common methods for refining microstructure and improving material properties,the organic combination can further optimize the performance of steel materials. A self-developed high-frequency induction coil heating furnace and a pulsed magnetic field generating device are used to non-contact apply a pulsed magnetic field to the solidification process of titanium-treated mild steel. The metallographic microscope,multifractal software and Vickers hardness tester are used. The effect of different pulsed magnetic field parameters on the solidification structure is investigated. The results show that the pulsed magnetic field induction intensity is 135-190 mT,and the magnetic field action time is 5-10 min,the metallographic structure of the test is the smallest and uniform. The original austenite grains are remarkably refined,the area reduced from 15.79 to 1.25 mm2,and the hardness of the test increased from 118.1 to 165.4HV. The pulsed magnetic field under this parameter has the best refinement of the solidification structure.
朱立光, 郑世伟, 张庆军, 曹胜利. 氧化物冶金与脉冲磁场参数影响钢组织的研究[J]. 钢铁, 2020, 55(3): 74-79.
ZHU Li-guang, ZHENG Shi-wei, ZHANG Qing-jun, CAO Sheng-li. Influence of oxide metallurgy and pulsed magnetic field parameters on steel microstructure. Iron and Steel, 2020, 55(3): 74-79.
[1] 翁宇庆. 超细晶钢——钢的组织细化理论与控制技术[M]. 北京:冶金工业出版社,2003.(WENG Yu-qing. Microstructure Theory and Control Technology of Ultrafine Grain Steel-Steel[M]. Beijing:Metallurgical Industry Press,2003.)
[2] 李振团,柴锋,杨才福,等. 淬火工艺对铜沉淀强化UHS钢组织性能的影响[J]. 钢铁, 2019, 54(6): 79.(LI Zhen-tuan,CHAI Feng,YANG Cai-fu,et al. Effect of quenching process on microstructure and mechanical properties of Cu precipitated hardened ultra-high strength steel[J]. Iron and Steel, 2019, 54(6): 79.)
[3] 张益龙,刘景佳, 王自荣. 退火方式及化学成分对汽车油箱用IF钢疲劳性能的影响[J]. 轧钢, 2019, 36(5): 43. (ZHANG Yi-long,LIU Jing-jia,WANG Zi-rong. Effects of annealing mode and chemical composition on fatigue property of IF steel used for fuel tank[J]. Steel Rolling, 2019, 36(5): 43.)
[4] 刘景佳,王自荣,张丽琴,等. 不同成分体系罩退高强IF钢的组织与性能[J]. 轧钢, 2018, 35(5): 39.(LIU Jing-jia,WANG Zi-rong,ZHANG Li-qin,et al. Microstructures and properties of high strength IF steels with different chemical compositions by batch annealing process[J]. Steel Rolling, 2018, 35(5): 39.)
[5] 金洋帆,臧其玉,张拓,等. Cr13系铸造马氏体不锈钢铌和碳的合理配比关系[J]. 钢铁, 2019, 54(3): 87. (JIN Yang-fan,ZANG Qi-yu,ZHANG Tuo,et al. Reasonable proportioning relationship between Nb and C of Cr13 series casting martensitic stainless steel[J]. Iron and Steel, 2019, 54(3): 87.)
[6] Qian M,Cao P,Easton M A,et al. An analytical model for constitutional super cooling-driven grain formation and grain size prediction[J]. Acta Materialia,2010,58(9):3262.
[7] Easton M A,D H St John. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles[J]. Acta Materialia,2001,49(10):1867.
[8] Metan V,Eigenfeld K,Rābiger D,et al. Grain size control in Al-Si alloys by grain refinement and electromagnetic stirring[J]. Journal of Alloys and Compounds,2009,487(1):163.
[9] 徐进康,陈刚,张振亚,等. 电磁搅拌对Al2O3p/ZL109复合材料组织与性能的影响[J].特种铸造及有色合金,2018,38(6):651.(XU Jin-kang,CHEN Gang,ZHANG Zhen-ya,et al. Effect of electromagnetic stirring on microstructure and properties of in-situ α-Al2O3p/ZL109 composites for pistons[J].Special-cast and Non-ferrous Alloys,2018,38(6):651.)
[10] Sukumaran K,Pai B C,Chakraborty M. The effect of isothermal mechanical stirring on an Al-Si alloy in the semisolid condition[J]. Materials Science and Engineering A,2003,369(1):275.
[11] 张云虎,仲红刚,翟启杰. 脉冲电磁场凝固组织细化和均质化技术研究与应用进展[J]. 钢铁研究学报,2017,29(4):249.(ZHANG Yun-hu,ZHONG Hong-gang,ZHAI Qi-jie. Research progress of grain refinement and homogenization of solidified metal alloys driven by pulsed electromagnetic fields[J]. Journal of Iron and Steel Research,2017,29(4):249.)
[12] 张大平,李斌,李莉娟. 脉冲磁场对高磁感取向硅钢初次再结晶晶粒尺寸的影响[J]. 金属热处理,2017,42(3):34.(ZHANG Da-ping,LI Bin,LI Li-juan. Effect of pulsed magnetic field on primary recrystallization grain size of high magnetic induction oriented silicon steel[J]. Heat Treatment of Metals,2017,42(3):34.)
[13] 梅国宏,朱立光,张庆军,等. 脉冲磁场细晶化技术的研究现状[J]. 铸造技术,2015,36(2):403.(MEI Guo-hong,ZHU Li-guang,ZHANG Qing-jun,et al. Research status of grain refinement technology with pulsed magnetic field[J]. Foundry Technology,2015,36(2):403.)
[14] 袁国,陈冬,康健,等. 大型热连轧线基于超快速冷却的新一代控轧控冷技术开发与应用[J]. 钢铁研究学报,2019,31(2):150.(YUAN Guo,CHEN Dong,KANG Jian,et al. Development and application of NG-TMCP technology based on ultra-fast cooling for large scale hot rolled strip lines[J].Journal of Iron and Steel Research,2019,31(2):150.)
[15] 曹胜利,张庆军,朱立光,等.基于多重分形研究脉冲磁场周期对凝固组织的影响[J].中国冶金,2019,29(4):31.(CAO Sheng-li,ZHANG Qing-jun,ZHU Li-guang,et al. Study on the effect of pulsed magnetic field period on solidification structure based on multifractal method[J].China Metallurgy,2019,29(4):31.)
[16] 曹胜利,张庆军,朱立光,等.脉冲磁场强度对钛处理低碳钢凝固过程的影响[J]. 中国冶金,2018,28(2):23.(CAO Sheng-li,ZHANG Qing-jun,ZHU Li-guang,et al. Influence of pulsed magnetic field intensity on solidification of low carbon steel with titanium treatment[J].China Metallurgy,2018,28(2):23.)
2020, Vol. 55 
