Effect of heat treatment process on creep-rupture property of 20Cr1Mo1VTiB bolt steel
WU Zhi-guang1, GONG Xue-ting1, LI Xin1, ZHAO Ji-qing2, GONG Zhi-hua2
1. Reactor Engineering Technology Research Department, Atomic Energy Institute of China, Beijing 102413, China; 2. Institute of Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China
Abstract:In order to verify the creep-rupture performance of 20Cr1Mo1VTiB bolt steel under the national and Russian standard heat treatment processes,the effects of two standard heat treatment processes on the structure and creep-rupture properties of 20Cr1Mo1VTiB bolt steel were studied by means of SEM and TEM. The results show that high-temperature quenching+high-temperature tempering (GB) has higher durability and stability than low-temperature quenching+low-temperature tempering (Russian standard) process. The Russian standard process has a low quenching temperature,a large amount of square (diamond) undissolved massive Ti-rich carbides with a large size distributed in the bainite,which promotes the formation of creep holes,and leading to the rapid decrease of creep-rupture strength. The Chinese standard process has a high quenching temperature,most of the Ti-rich carbides were dissolved into the matrix,lot of fine particles of VC with good thermal stability precipitated during tempering,and the creep-rupture strength was improved. Thus,it was more reasonable using high temperature quenching and tempering.
武志广, 龚雪婷, 李鑫, 赵吉庆, 龚志华. 热处理工艺对20Cr1Mo1VTiB螺栓钢持久性能的影响[J]. 钢铁, 2020, 55(6): 101-106.
WU Zhi-guang, GONG Xue-ting, LI Xin, ZHAO Ji-qing, GONG Zhi-hua. Effect of heat treatment process on creep-rupture property of 20Cr1Mo1VTiB bolt steel. Iron and Steel, 2020, 55(6): 101-106.
[1] 王琦安,龙斌,王西涛,等. 中国钠冷快堆材料研发体系的研究[J]. 钢铁研究学报,2014,26(9):1.(WANG Qi-an,LONG Bin,WANG Xi-tao,et al. Study on research and development system of materials for sodium-cooled fast reactor technology[J]. Journal of Iron and Steel Research,2014,26(9):1.) [2] 徐海涛. 快堆结构材料综述[J]. 核科学与工程,2008(6):129.(XU Hai-tao. Structural materials in fast reactor[J]. Chinese Journal of Nuclear Science and Engineering,2008(6):129.) [3] 王志武,宋涛. 高温服役3×105 h后汽缸螺栓用20Cr1Mo1V1钢的应力松弛性能[J]. 机械工程材料,2013,37(2):74.(WANG Zhi-wu,SONG Tao. Stress relaxation of 20CrlMolV1 steel for cylinder bolt after working for 3×105 h at high temperature[J]. Materials for Mechanical Engineering,2013,37(2):74.) [4] 张传平. 20Cr1Mo1VTiB钢粗晶组织对高温紧固件安全性的分析[J]. 机械工程材料,1984(1):58.(ZHANG Chuan-ping. Analysis of the coarse crystal structure of 20Cr1Mo1VTiB steel on the safety of high temperature fastener[J]. Materials For Mechanical Engineering,1984(1):58.) [5] 龚正春,孔令勤,刘淑珍,等. 热处理工艺对20Cr1Mo1V1紧固件性能的影响[J]. 热能动力工程,2000,15(2):38.(GONG Zheng-chun,KONG Ling-qin,LIU Shu-zhen,et al. Effect of heat treatment process on the properties of 20Cr1Mo1V1 fastener[J]. Journal of Engineering for Thermal Energy and Power,2000,15(2):38.) [6] 龚雪婷,武志广,李鑫,等. 热处理工艺对20Cr1Mo1VTiB螺栓钢组织及性能的影响[J]. 钢铁,2018,53(12):105.(GONG Xue-ting,WU Zhi-guang,LI Xin,et al. Effect of heat treatment process on microstructure and properties of 20Cr1Mo1VTiB bolt steel[J]. Iron and Steel,2018,53(12):105.) [7] 梁启华,龙荷荪,李锡峰,等. GB/T 20410 涡轮机高温螺栓用钢[S]. 北京:中国标准出版社,2006.(LIANG Qi-hua,LONG He-sun,LI Xi-feng,et al. GB/T 20410 High Temperature Bolt Steel for Turbine[S]. Beijing:China Standard Press,2006.) [8] 朱林茂,高怡斐,朱月梅,等. GB/T 2039—2012 金属材料单轴拉伸蠕变试验方法[S]. 北京:中国标准出版社,2012.(ZHU Lin-mao,GAO Yi-fei,ZHU Yue-mei,et al. GB/T 2039—2012 Test Method for Uniaxial Tensile Creep of Metallic Materials[S]. Beijing:China Standard Press,2012.) [9] 刘正东,程世长,王起江,等. 中国600 ℃火电机组锅炉钢进展[M]. 北京:冶金工业出版社,2011. (LIU Zheng-dong,CHENG Shi-chang,WANG Qi-jiang,et al. Progress of Boiler Steel for 600 ℃ Thermal Power Units in China[M]. Beijing:Metallurgical Industry Press,2011.) [10] Wei F G,Hara T,Tsuzaki K. High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in tempered steel[J]. Philosophical Magazine A,2004,84(17):1735.