Abstract:The wall thickness eccentricity control of hollows rolled by a three-roll tube mill is an important part of the wall thickness precision control of seamless steel tubes. Based on production trials,this paper analyzes the characteristics of the wall thickness eccentricity of hollows,establishes the theoretical calculation model of the wall thickness eccentricity of three-roll rolled hollows using analytical methods,carries out the prediction calculation and comparison according to the actual production conditions,analyzes the influence characteristics of the three-roll rolling process factors on the wall thickness eccentricity of hollows,and further discusses the methods to improve the wall thickness eccentricity of hollows. The results show that the basic characteristics of the wall thickness eccentricity of hollows are "eccentric screw type",accounting for more than 80% of the uneven wall thickness of hollows. The eccentricity of the wall thickness and temperature in shells are the most important factors affecting the wall thickness eccentricity of the three-roll rolled hollows. Increasing the reduction of the three-roll rolling,reducing the temperature of shells,increasing the height of the roll shoulder,and increasing the rotation speed of the rolls are conducive to reduce the wall thickness eccentricity of hollows.
[1] 彭在美. 中国钢管高速增长的历程是世界钢管发展史上最光辉的篇章[J]. 世界金属导报,2019-01-29(B10).(PENG Zai-mei. The rapid growth of Chinese steel pipe is the most glorious chapter in the history of steel pipe development in the world[J]. World Metal,2019-01-29(B10).) [2] 成海涛. 推动我国无缝钢管行业健康发展的思考[J]. 钢管,2018,47(5):1.(CHENG Hai-tao. Thinking about pushing forward healthy development of seamless steel tube industry in China[J].Steel Pipe,2018,47(5):1.) [3] 罗涛. 无缝钢管斜轧生产工艺的应用与发展[J]. 钢管,2018,47(4):1.(LUO Tao. Application and development of cross-rolling process for seamless steel tubes[J]. Steel Pipe,2018,47(4):1.) [4] 胡启国,刘博文,姜永正,等. 无缝钢管张减成形的高精度有限元模型及实验验证[J]. 机械设计与制造,2019(10):42.(HU Qi-guo,LIU Bo-wen,JIANG Yong-zheng,et al. Visco-elastic plastic finite element model of stretch-reducing forming of seamless steel tube[J]. Machinery Design and Manufacture,2019(10):42.) [5] 王超峰,胡斌斌,杜凤山. 宝钢无缝钢管张力减径有限元模拟与验证[J]. 塑性工程学报,2018,25(3):297.(WANG Chao-feng,HU Bin-bin,DU Feng-shan. Finite element analysis and verification of stretch-reducing for Baosteel seamless tube[J]. Journal of Plasticity Engineering,2018,25(3):297.) [6] 王军,双远华,周研,等. 流函数法在无缝钢管张力减径过程中的应用[J]. 塑性工程学报,2017,24(3):214.(WANG Jun,SHUANG Yuan-hua,ZHOU Yan,et al. Application of flow function method in tension reduction process of seamless steel tube[J]. Journal of Plasticity Engineering,2017,24(3):214.) [7] 汪洋,李铁克,王柏琳.顺序依赖的调整时间和拖期的无缝钢管热轧批量调度算法[J/OL].控制与决策.https://doi.org/10.13195/j.kzyjc.2019.0723.(WANG Yang,LI Tie-ke,WANG Bo-lin. Hot-rolled batch scheduling algorithm for seamless steel tube with sequence-dependent setup times and tardiness[J/OL]. Control and Decision. https://doi.org/10.13195/j.kzyjc.2019.0723.) [8] 方旭东,包汉生,李阳,等. 超超临界锅炉用新型耐热无缝管C-HRA-5的开发[J].钢铁,2020,55(2):119.(FANG Xu-dong,BAO Han-sheng,LI Yang,et al. Development of model heat resisting seamless tube C-HRA-5 for ultra-supercritical power plant boilerand[J]. Iron and Steel,2020,55(2):119.) [9] 李宏,高佩,涂玉先,等. GH2747高温合金无缝管的试制[J]. 轧钢,2020,37(1):88.(LI Hong,GAO Pei,TU Yu-xian,et al. Trial production of GH2747 superalloy seamless tube[J].Steel Rolling,2020,37(1):88.) [10] 刘剑辉,董瀚. 关于特殊钢生产流程持续优化的思考[J]. 中国冶金,2018,28(9):1.(LIU Jian-hui,DONG Han. Thoughts on continuous optimization of special steel production process[J]. China Metallurgy,2018,28(9):1.) [11] 吕庆功,牟仁玲,许文婧. 无缝钢管斜轧穿孔毛管壁厚偏心分析[J]. 钢铁,2017,52(8):65.(LÜ Qing-gong,MU Ren-ling,XU Wen-jing. Analysis on wall thickness eccentricity of cross-roll pierced shells of seamless steel tube[J]. Iron and Steel,2017,52(8):65.) [12] 宋仁伯. 轧钢工艺学[M]. 北京:冶金工业出版社,2014.(SONG Ren-bo. Technology of Rolling[M]. Beijing:Metallurgical Industry Press,2014.) [13] 李连诗. 钢管塑性变形原理[M]. 北京:冶金工业出版社,1985.(LI Lian-shi. The Plastic Deformation Principle on Steel Pipe[M]. Beijing:Metallurgical Industry Press,1985.) [14] 周纪华,管克智. 金属塑性变形阻力[M]. 北京:机械工业出版社,1989.(ZHOU Ji-hua,GUAN Ke-zhi. Metal Plastic Deformation Resistance[M]. Beijing:Machinery Industry Press,1989.) [15] 万本振,韩建元,周新亮. Assel轧管机轧制力计算研究[J]. 钢管,2018,47(3):56.(WAN Ben-zhen,HAN Jian-yuan,ZHOU Xin-liang. Research on calculation of rolling force of Assel rolling mill[J]. Steel Pipe,2018,47(3):56.) [16] 许占海,刘广亭. 包钢环形炉管坯加热温度测试和研究[J]. 工业炉,2009,31(3):7.(XU Zhan-hai, LIU Guang-ting. Heating temperature measurement of slab rotary furnace in BTCO[J]. Industrial Furnace,2009,31(3):7.) [17] 白丽杨,李胜祗,周志扬. 锥形辊斜轧穿孔过程温度场的研究[J]. 安徽工业大学学报:自然科学版,2015,32(4):315.(BAI Li-yang,LI Sheng-zhi,ZHOU Zhi-yang. Research on temperature field during cross piercing with cone-roll piercer[J]. Journal of Anhui University of Technology:Natural Science, 2015,32(4):315.)