精炼渣的夹杂物容量的概念及其应用

doi:10.13228/j.boyuan.issn0449-749x.20220407

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (6505 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要分析了目前文献中使用夹杂物组分在渣中的饱和质量分数和当前质量分数的差值除以渣的黏度(ΔC/η)这一参数来评价夹杂物在渣中溶解能力的文献来源以及该参数的局限性,包括该参数有量纲且没有包含夹杂物尺寸的影响。与流体流动的自然对流传热中使用的格拉晓夫数进行类比,提出了渣的夹杂物容量的概念,即无量纲的Zh数,同时提出了无量纲溶解速度R_y的概念,得到了渣的夹杂物容量与夹杂物无量纲溶解速度之间的关系。夹杂物容量可以用来预测夹杂物在渣中的溶解速度和溶解时间,可以用来计算溶解过程化学反应系数和夹杂物组分在渣中的扩散系数,还可以用来计算夹杂物从钢液中的去除时间。随着夹杂物容量Zh数的增加和夹杂物尺寸的增大,夹杂物的溶解时间增大。随着夹杂物尺寸的增大,夹杂物的平均去除时间增加而最大去除时间降低。温度为1 600 ℃时,针对Al₂O₃夹杂物在CaO-Al₂O₃-SiO₂渣中的溶解过程,计算得到的界面化学反应系数为5×10^-6～10×10^-6 m/s,扩散系数为2.5×10^-10～4×10^-10 m²/s,其值依据渣成分的变化而变化。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张立峰
	任英

关键词 ：夹杂物容量, 精炼渣, 黏度, 饱和浓度, 夹杂物溶解

Abstract：The parameter of the difference between the original concentration and the saturation concentration of inclusions in the refining slag divided by slag viscosity (ΔC/η) was retrieved from literatures and the disadvantages of the parameter were discussed, including its dimensional feature and the ignorance of the size of inclusions. Similar to the dimensionless Grash of number used to the natural convection of the fluid flow, the inclusion capacity of the refining slag was proposed (the dimensionless number of Zh). The dimensionless dissolution rate of inclusions in the slag (R_y) was proposed. The expression between the inclusion capacity of the slag and the dimensionless dissolution rate was obtained. The inclusion capacity of the slag, the Zh number, can be used to predict the dissolution rate and dissolution time of inclusions in the refining slag, to calculate the rate constant of the dissolution reaction and the diffusion coefficient of inclusions in the slag, and to calculate the removal time of inclusions from the molten steel. With the increasing of the Zh number and the increasing of inclusion size, the dissolution time of inclusions became longer. With the increasing of inclusion size, the average removal time of less than 500 μm inclusions increased while the maximum removal time decreased. At the temperature of 1 600 ℃, for the dissolution of Al₂O₃ in the CaO-Al₂O₃-SiO₂ slag, the dissolution reaction rate constant was 5×10^-6-10×10^-6 m/s and the diffusion coefficient of Al₂O₃ in the CaO-Al₂O₃-SiO₂ slag was 2.5×10^-10-4×10^-10 m²/s, and the two parameters varied with the composition of the slag.

Key words： inclusion capacity refining slag viscosity saturation concentration dissolution of inclusions

收稿日期: 2022-06-09

引用本文:

张立峰, 任英. 精炼渣的夹杂物容量的概念及其应用[J]. 钢铁, 2023, 58(2): 47-60. ZHANG Li-feng, REN Ying. Concept of inclusion capacity of slag and its application[J]. Iron and Steel, 2023, 58(2): 47-60.

链接本文:

http://www.chinamet.cn/Jweb_gt/CN/10.13228/j.boyuan.issn0449-749x.20220407 或 http://www.chinamet.cn/Jweb_gt/CN/Y2023/V58/I2/47

[1] 张立峰. 钢中非金属夹杂物:工业实践[M]. 北京:冶金工业出版社, 2019. (ZHANG Li-feng. Nonmetallic Inclusions in Steel: Industrial Practice[M]. Beijing:Metallurgical Industry Press, 2019.)
[2] 张立峰. 钢中非金属夹杂物[M]. 北京:冶金工业出版社, 2019. (ZHANG Li-feng. Non-Metallic Inclusions in Steels[M]. Beijing:Metallurgical Industry Press, 2019.)
[3] 张立峰, 吴巍, 蔡开科. 洁净钢中杂质元素的控制 [J]. 炼钢, 1996, 12(5): 36. (ZHANG Li-feng, WU Wei, CAI Kai-ke. Control of the impurity elements in clean steel[J]. Steelmaking, 1996, 12(5): 36.)
[4] 张立峰. 钢中非金属夹杂物图集(上)[M]. 北京:冶金工业出版社, 2019. (ZHANG Li-feng. Atlas of Nonmetallic Inclusions in Steel (Part 1)[M]. Beijing:Metallurgical Industry Press, 2019.)
[5] 张立峰. 钢中非金属夹杂物图集(下)[M]. 北京:冶金工业出版社, 2019. (ZHANG Li-feng. Atlas of Nonmetallic Inclusions in Steel (Part 2)[M]. Beijing:Metallurgical Industry Press, 2019.)
[6] 张立峰. 关于钢洁净度指数的讨论[J]. 炼钢, 2019, 35(3): 1. (ZHANG Li-feng. Discussion on the index of steel cleanliness[J]. Steelmaking, 2019, 35(3): 1.)
[7] 程礼梅, 张立峰, 沈平. 钢铁冶金过程中的界面现象[J]. 工程科学学报, 2018, 40(10): 1139. (CHENG Li-mei, ZHANG Li-feng, SHEN Ping. Interfacial phenomena in ironmaking and steelmaking[J]. Chinese Journal of Engineering, 2018, 40(10): 1139.)
[8] 程礼梅, 张立峰, 沈平. 钢铁冶金过程中的界面润湿性的基础[J]. 工程科学学报, 2018, 40(12): 1434. (CHENG Li-mei, ZHANG Li-feng, SHEN Ping. Fundamentals of interfacial wettability in ironmaking and steelmaking[J]. Chinese Journal of Engineering, 2018, 40(12): 1434.)
[9] 张立峰. 钢中非金属夹杂物几个需要深入研究的课题[J]. 炼钢, 2016, 32(4): 1. (ZHANG Li-feng. Several important scientific research points of non-metallic inclusions in steel[J]. Steelmaking, 2016, 32(4): 1.)
[10] 张立峰, 李燕龙, 任英. 钢中非金属夹杂物的相关基础研究(Ⅱ)——夹杂物检测方法和脱氧热力学基础[J]. 钢铁, 2013, 48(12): 1. (ZHANG Li-feng, LI Yan-long, REN Ying. Fundamentals of non-metallic inclusions in steel: Part Ⅱ. Evaluation method of inclusions and thermodynamics of steel deoxidation[J]. Iron and Steel, 2013, 48(12): 1.)
[11] 张立峰, 李燕龙, 任英. 钢中非金属夹杂物的相关基础研究(I)——非稳态浇铸中的大颗粒夹杂物和钢液中夹杂物的形核长大、运动碰撞、捕捉去除[J].钢铁, 2013, 48(11): 1. (ZHANG Li-feng, LI Yan-long, REN Ying. Fundamentals of non-metallic inclusions in steel: Part Ⅰ. Control of unsteady casting and big inclusions,nucleation, motion, removal and capture of inclusions in molten steel[J].Iron and Steel,2013, 48(11): 1.)
[12] Pedro Cunha Alves, Vinicius Cardoso Da Rocha, Julio Anibal Morales Pereira,et al. Evaluation of thermodynamic driving force and effective viscosity of secondary steelmaking slags on the dissolution of Al₂O₃-based inclusions from liquid steel[J].ISIJ International, 2021, 61(7): 2092.
[13] Vinicius Cardoso Da Rocha, Julio Anibal Morales Pereira, Ayumi Yoshioka, et al. Effective viscosity of slag and kinetic stirring parameter applied in steel cleanliness during vacuum degassing[J]. Materials Research, 2017, 20(6): 1480.
[14] Yoon B H,Heo K H,Kim J S,et al. Improvement of steel cleanliness by controlling slag composition[J]. Ironmaking and Steelmaking, 2002, 29(3): 215.
[15] Mgaidi A, Jendoubi F, Oulahna D, et al. Kinetics of the dissolution of sand into alkaline solutions: Application of a modified shrinking core model[J]. Hydrometallurgy, 2004, 71(3/4): 435.
[16] Agnieszka Didyk-Mucha, Agnieszka Pawlowska, Zygmunt Sadowski. Application of the shrinking core model for dissolution of serpentinite in an acid solution[C]//2016 Mineral Engineering Conference.Swieradow-Zdroj: EDP Sciences, 2016: 8.
[17] Dilip K Rajak, Chandan Guria, Rana Ghosh,et al. Alkali assisted dissolution of fly ash: A shrinking core model under finite solution volume condition[J]. International Journal of Mineral Processing, 2016, 155:106.
[18] MA Qin. Analogy between transient heat conduction and dissolution of solid particles in liquids based on the shrinking core model[C]//ASME 2017 Heat Transfer Summer Conference.Bellevue: American Society of Mechanical Engineers, 2017: 2.
[19] Hernan Islas, Mizraim U Flores, Ivan A Reyes, et al. Determination of the dissolution rate of hazardous jarosites in different conditions using the shrinking core kinetic model[J]. Journal of Hazardous Materials, 2020, 386(15):121664.
[20] Martin Valdez, George S Shannon, Seetharaman Sridhar. The ability of slags to absorb solid oxide inclusions[J]. ISIJ International, 2006, 46(3): 450.
[21] Zhang Li-feng, Pluschkell W. Nucleation and growth kinetics of inclusions during liquid steel deoxidation[J]. Ironmaking and Steelmaking, 2003, 30(2): 106.
[22] Yu Zhong-da, Kusuhiro Mukai, Kazuhiko Kawasaki, et al. Relation between corrosion rate of magnesia refractories by Molten slag and penetration rate of slag into refractories[J]. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 1993, 101(1173): 533.
[23] Yi K W, Tse C, Park J H,et al. Determination of dissolution time of Al₂O₃ and MgO inclusions in synthetic Al₂O₃-CaO-MgO slags[J]. Scandinavian Kournal of Metallurgy, 2003, 32(4): 177.
[24] Valdez M, Prapakorn K, Cramb A W,et al. Dissolution of alumina particles in CaO-Al₂O₃-SiO₂-MgO slags[J]. Ironmaking and Steelmaking, 2002, 29(1): 47.
[25] Sridhar S, Cramb A W. Kinetics of Al₂O₃ dissolution in CaO-MgO-SiO₂-Al₂O₃ slags: In situ observations and analysis[J]. Metallurgical and Materials Transactions B, 2000, 31(2): 406.
[26] REN Chang-yu, ZHANG Li-feng, ZHANG Ji, et al. In situ observation of the dissolution of Al₂O₃ particles in CaO-Al₂O₃-SiO₂ slags[J]. Metallurgical and Materials Transactions B, 2021, 52(5): 3288.
[27] Monaghan B J, Chen L. Dissolution behavior of alumina micro-particles in CaO-SiO₂-Al₂O₃ liquid oxide[J]. Journal of Non-Crystalline Solids, 2004, 347(1): 254.
[28] Fox A B, Valdez M, Gisby J,et al. Dissolution of ZrO₂, Al₂O₃, MgO and MgAl₂O₄ particles in a B₂O₃ containing commercial fluoride-free mould slag[J]. ISIJ International, 2004, 44(5): 836.
[29] Monaghan B J, Chen L, Sorbe J. Comparative study of oxide inclusion dissolution in CaO-SiO₂-Al₂O₃ slag[J]. Ironmaking and Steelmaking, 2005, 32(3): 258.
[30] Ja-Yong Choi, Hae-Geon Lee, Jeong-Sik Kim. Dissolution rate of Al₂O₃ into molten CaO-SiO₂-Al₂O₃ slags[J]. ISIJ International, 2002, 42(8): 852.
[31] Jun Seok Park, Joo Hyun Park. Effectof physicochemical properties of slag and flux on the removal rate of oxide inclusion from molten steel[J]. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2016, 47(6): 3225.
[32] REN Ying, ZHU Pei, REN Chang-yu, et al. Dissolution of SiO₂ inclusions in CaO-SiO₂-based slags in-situ observed using high-temperature confocal scanning laser microscopy[J]. Metallurgical and Materials Transactions B, 2022, 53(2): 682.
[33] Michelic S, Goriupp J, Feichtinger S,et al. Study on oxide inclusion dissolution in secondary steelmaking slags using high temperature confocal scanning laser microscopy[J]. Steel Research International, 2016, 87(1): 57.
[34] Feichtinger S, Michelic S K, Kang Y B,et al. In Situ observation of the dissolution of SiO₂ particles in CaO-Al₂O₃-SiO₂ slags and mathematical analysis of its dissolution pattern[J]. Journal American Ceramics Society, 2014, 97(1): 316.
[35] Sharma M, Dogan N. Dissolution behavior of aluminum titanate inclusions in steelmaking slags[J]. Metallurgical and Materials Transactions B, 2020, 51(2): 1.
[36] REN Chang-yu, HUANG Cai-de, ZHANG Li-feng, et al. In-situ observation of the kinetic dissolution of Al₂O₃ particles in CaO-Al₂O₃-SiO₂ slags using laser confocal scanning microscopy[J].International Journal of Minerals, Metallurgy and Materials, 2023,30(2):345.
[37] Miao K, Haas A, Sharma M, Mu W, et al. In situ observation of calcium aluminate inclusions dissolution into steelmaking slag[J]. Metallurgical and Materials Transactions B, 2018, 49(4): 1612.
[38] WEN Xin, ZHANG Li-feng, REN Ying. Effect of CaF₂ contents in slag on inclusion absorption in the bearing steel[J]. Steel Research International 2022,DOI:10.1002/srin.202200218.
[39] 王举金. 钢液精炼过程中非金属夹杂物成分、数量和尺寸演变的基础研究[D]. 北京:北京科技大学, 2022.(WANG Ju-jin. Fundamental Study on the Evolution of the Composition, Number Density and Size Distribution of Non-metallic Inclusions in Molten Steel during Refining[D]. Beijing:University of Science and Technology Beijing, 2022.)
[40] 任昶宇, 张立峰, 任英. 高温共聚焦显微镜原位观察非金属夹杂物溶解行为研究进展[J]. 钢铁研究学报,2021,33(8):670. (REN Chang-yu, ZHANG Li-feng, REN Ying. A review on dissolution behavior of non-metallic inclusions in-situ observed using high temperature confocal scanning laser microscope[J].Journal of Iron and Steel Research,2021,33(8):670.)
[41] 王祎, 张立峰, 任英, 等. 37Mn5钢精炼过程夹杂物转变机理[J].钢铁,2020,55(5):39. (WANG Yi, ZHANG Li-feng, REN Ying, et al. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020,55(5):39.)
[42] 朱坦华, 周秋月, 任英, 等. 二次氧化过程IF钢中间包中夹杂物演变行为[J]. 钢铁, 2020,55(3):35. (ZHU Tan-hua, ZHOU Qiu-yue, REN Ying, et al. Inclusion evolution in IF steel during tundish reoxidation[J]. Iron and Steel, 2020,55(3):35.)
[43] 鲁达, 李维福, 任英, 等. 固态钢加热过程中非金属夹杂物转变研究进展[J]. 钢铁研究学报, 2020,32(12):1021. (LU Da, LI Wei-fu, REN Ying,et al. Transformation of non-metallic inclusions in solid steel during heating process[J]. Journal of Iron and Steel Research,2020,32(12):1021.)
[44] 王伟健, 罗艳, 张立峰, 等. 20CrMo合金钢生产过程中非金属夹杂物的演变[J]. 工程科学学报, 2021,43(8):1090. (WANG Wei-jian, LUO Yan, ZHANG Li-feng, et al. Evolution of nonmetallic inclusions during production of 20CrMo alloy steel[J]. Chinese Journal of Engineering, 2021,43(8):1090.)
[45] 隋亚飞, 邓之勋, 赵如, 等. CSP产线下汽车结构用热轧酸洗板中的夹杂物[J]. 钢铁, 2021,56(4):44. (SUI Ya-fei, DENG Zhi-xun, ZHAO Ru, et al. Inclusions in hot rolled picking plate for automobile structure through CSP process[J]. Iron and Steel,2021,56(4):44.)
[46] 潘明, 于会香, 季晨曦, 等. RH精炼过程中吹氧量对IF钢洁净度的影响[J]. 工程科学学报, 2020,42(7):846. (PAN Ming, YU Hui-xiang, JI Chen-xi, et al. Effect of oxygen blowing during RH treatment on the cleanliness of IF steel[J].Chinese Journal of Engineering,2020,42(7):846.)
[47] 王举金, 张立峰, 陈威, 等. 卷渣类夹杂物在结晶器钢液中成分转变的动力学模型[J]. 工程科学学报, 2021,43(6):786. (WANG Ju-jin, ZHANG Li-feng, CHEN Wei, et al. Kinetic model of the composition transformation of slag inclusions in molten steel in continuous casting mold[J].Chinese Journal of Engineering, 2021,43(6):786.)
[48] 赵吉轩, 朱航宇, 王伟胜, 等. 精炼渣与高锰高铝钢液的相互作用[J]. 钢铁研究学报, 2021,33(8):726. (ZHAO Ji-xuan, ZHU Hang-yu, WANG Wei-sheng,et al. Interaction between refining slag and high manganese and high aluminum molten steel[J].Journal of Iron and Steel Research, 2021,33(8):726.)