|
|
Improvement of high manganese steel in ball mill lining |
LI Yan-long1,QI Liang2,SHAO Chuan-bing1,MA Lin-ting1,CHENG Liang1,LI Yin-li1 |
(1. Key Laboratory of New Process for Non-Ferrous Metal Smelting and Rare Metal High Utilization Efficiency in Gansu Province, Northwest Research Institute of Mining and Metallurgy, Baiyin 730900, Gansu, China 2. School of Materials Science and Engineering, Jiangxi University of Science and Technology,Ganzhou 341000, Jiangxi, China) |
|
|
Abstract The problem of easy cracking and deformation of high manganese steel wear liner was studied by analysis of composition and properties. The hardness,wear resistance,impact resistance and service life of high manganese steel wear liner were greatly improved by added a certain amount of alloy additives and improve the heat treatment. Finally the hardness,abrasion resistance,tensile strength and yield strength of high manganese steel were improved 10.7%,62.7%,7.4% and 8.13% respectively.
|
Received: 18 August 2017
Published: 16 March 2018
|
|
|
|
[1] |
定治明,刘静,鲁修宇,等.球磨机衬板材料的发展概况及选材要点[J].矿山机械,2010,(19):85-88.
|
[1] |
定治明,刘静,鲁修宇,等.球磨机衬板材料的发展概况及选材要点[J].矿山机械,2010,(19):85-88.
|
[2] |
罗飞扬,李安运,程明焱,等.中锰钢在球磨机衬板上的应用[J].有色金属科学与工程,2011,02(3):6-8.
|
[2] |
罗飞扬,李安运,程明焱,等.中锰钢在球磨机衬板上的应用[J].有色金属科学与工程,2011,02(3):6-8.
|
[3] |
仰明.一种改性高锰钢合金衬板,CN104152819A[P].2014.
|
[3] |
仰明.一种改性高锰钢合金衬板,CN104152819A[P].2014.
|
[4] |
赵金山,党君鹏,许科敏,等.稀土改性高锰钢衬板的生产[J].铸造技术,2009,30(6):833-834.
|
[4] |
赵金山,党君鹏,许科敏,等.稀土改性高锰钢衬板的生产[J].铸造技术,2009,30(6):833-834.
|
[5] |
张燕平,李东南.不同壁厚高锰钢铸件水韧处理与耐磨性的研究[J].热加工工艺,2013,42(8):173-176.
|
[5] |
张燕平,李东南.不同壁厚高锰钢铸件水韧处理与耐磨性的研究[J].热加工工艺,2013,42(8):173-176.
|
[6] |
李大军、侯蕊、LIDajun,等.Mn13高锰钢的热处理工艺研究[J].热加工工艺,2010,39(16):158-160.
|
[6] |
李大军、侯蕊、LIDajun,等.Mn13高锰钢的热处理工艺研究[J].热加工工艺,2010,39(16):158-160.
|
[7] |
蔡岳洪,胡晖.提高高锰钢衬板性能的研究[J].铸造技术,2000,(3):6-9.
|
[7] |
蔡岳洪,胡晖.提高高锰钢衬板性能的研究[J].铸造技术,2000,(3):6-9.
|
[8] |
Chen L, Zhao Y, Qin X. Some Aspects of High Manganese Twinning-Induced Plasticity(TWIP) Steel, A Review[J]. Acta Metallurgica Sinica(English Letters), 2013, 26(1): 1-15.
|
[8] |
Chen L, Zhao Y, Qin X. Some Aspects of High Manganese Twinning-Induced Plasticity(TWIP) Steel, A Review[J]. Acta Metallurgica Sinica(English Letters), 2013, 26(1): 1-15.
|
[9] |
Saeed-Akbari A, Mosecker L, Schwedt A, et al. Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: Part I. Mechanism maps and work-hardening behavior[J]. Metallurgical and Materials Transactions A, 2012, 43(5): 1688-1704.
|
[9] |
Saeed-Akbari A, Mosecker L, Schwedt A, et al. Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: Part I. Mechanism maps and work-hardening behavior[J]. Metallurgical and Materials Transactions A, 2012, 43(5): 1688-1704.
|
[10] |
李常锋,李文生,白创明,等.高锰钢球磨机衬板的生产技术[J].铸造技术,2004,25(6):405-406.
|
[10] |
李常锋,李文生,白创明,等.高锰钢球磨机衬板的生产技术[J].铸造技术,2004,25(6):405-406.
|
[11] |
赵杰,徐海峰,时捷,等.细晶强化和位错强化对中锰马氏体钢的强化作用[J].钢铁,2012, 47(8):57-61.
|
[11] |
赵杰,徐海峰,时捷,等.细晶强化和位错强化对中锰马氏体钢的强化作用[J].钢铁,2012, 47(8):57-61.
|
[12] |
刘春明,王建军,林仁荣,等.微量碳在钢铁材料细晶强化中的作用[J].材料科学与工艺,2001,9(3):301-304.
|
[12] |
刘春明,王建军,林仁荣,等.微量碳在钢铁材料细晶强化中的作用[J].材料科学与工艺,2001,9(3):301-304.
|
[13] |
LI X, WANG C, Lu L U. Microstructure and impact wear resistance of TiN reinforced high manganese steel matrix[J]. Journal of Iron and Steel Research, International, 2012, 19(7): 60-65.
|
[13] |
LI X, WANG C, Lu L U. Microstructure and impact wear resistance of TiN reinforced high manganese steel matrix[J]. Journal of Iron and Steel Research, International, 2012, 19(7): 60-65.
|
[14] |
Dobrzański L A, Borek W. Hot-rolling of advanced high-manganese C-Mn-Si-Al steels[C]//Materials Science Forum. Trans Tech Publications, 2012, 706: 2053-2058.
|
[14] |
Dobrzański L A, Borek W. Hot-rolling of advanced high-manganese C-Mn-Si-Al steels[C]//Materials Science Forum. Trans Tech Publications, 2012, 706: 2053-2058.
|
[15] |
Xu H F, Zhao J, Cao W Q, et al. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2 C–5Mn)[J]. Materials Science and Engineering: A, 2012, 532: 435-442.
|
[15] |
Xu H F, Zhao J, Cao W Q, et al. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2 C–5Mn)[J]. Materials Science and Engineering: A, 2012, 532: 435-442.
|
[1] |
DU Liang, HAN Xiu-li, ZHANG Quan-sheng, ZHOU Xiang, YANG Hong-da, WANG Ying. Quantitative relation between mineralogical structure and metallurgical properties of sinter of import iron ore[J]. Iron and Steel, 2020, 55(6): 38-45. |
[2] |
SUN Chao-fan, FANG Yuan, WANG Ya-qing, LIU Wei. Influence of temper rolling reduction rate on microstructure and mechanical properties of TS290 steel[J]. Iron and Steel, 2020, 55(6): 75-79. |
[3] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[4] |
WU Zhi-guang, GONG Xue-ting, LI Xin, ZHAO Ji-qing, GONG Zhi-hua. Effect of heat treatment process on creep-rupture property of 20Cr1Mo1VTiB bolt steel[J]. Iron and Steel, 2020, 55(6): 101-106. |
[5] |
SHAO Chun-juan,ZHEN Fan,ZHANG Ji-ming,QU Jin-bo,ZHANG Lei. Effect of sample thinning on DWTT property of heavy wall X80 steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 497-504. |
[6] |
LI Xiao-yuan,SHI Jie. Ballistic behavior of high strength steel targets during high speed impact of projectile[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 429-436. |
|
|
|
|