|
|
Research on Yield Strength of ColdRolled Annealed and SkinPassed Steel Strip From CSP Hot Coil |
WU Kangmian1,CHENG Xiaojun2,CHEN Xingguo3,ZHOU Feng4 |
1. Technical Center, Lianyuan Iron and Steel Group Co., Ltd., Loudi 417009, Hunan, China;2.Office of Lianyuan Iron and Steel Group Co., Ltd., Loudi 417009, Hunan, China;3. ColdRolling Sheet Plant, Lianyuan Iron and Steel Group Co., Ltd., Loudi 417009, Hunan, China;4. HotRolling Sheet Plant, Lianyuan Iron and Steel Group Co., Ltd., Loudi 417009, Hunan, China |
|
|
Abstract The fact,that the yield strength of coldrolled, annealed, skinpassed strip produced from CSP hot coil is higher than expected is observed, which causes lower formability. Systematical research was done on recrystallization behavior, annealing and skinpass technology, coiling tension of TCM, hot rolling technology and chemical composition. Problems of high hardness and cracking during drawing were solved for CQ, DQ grade products.
|
Received: 01 January 1900
|
|
|
|
[1] |
YANG Geng-wei1,HU Zhuo-li1,YIN Qi-long1,MAO Xin-ping1,2,MIAO Li-sha1,LIU Yang2. Effect of phase transformation time on microstructure and mechanical properties of hotrolled TRIP steel produced by CSP process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(2): 143-149. |
[2] |
YI Hang1,YANG Geng-wei1,MAO Xin-ping1,2,ZHAO Gang1,XU Yao-wen1,BAO Si-qian1. Effect of deformation temperature on phase transformation behavior of hot rolled 65Mn steel produced by CSP process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 74-80. |
[3] |
XIAO Zunhu,SUI Yafei,LIU Peng,XU Gangjun,LI Ciying. Evolution and control of inclusions in aluminumcontaining on #br# oriented electrical steel through CSP process[J]. Iron and Steel, 2019, 54(7): 42-48. |
[4] |
ZHENG Xiaofei, KANG Yonglin, WU Xuesong. Correlation between bake hardening values and annealing temperature of DP980+Z[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(5): 485-490. |
[5] |
. Research and Solution of Nozzle Clogging Problem of Aluminum-Containing Electrical Steel in CSP Process[J]. , 2019, 44(4): 0-0. |
[6] |
XIE Hong-bo. Analysis of several abnormal situations in measuring yield strength of metallic materials[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(2): 23-27. |
|
|
|
|