|
|
Theoretical Analysis on Metallurgical Effect and Flow Field of CSP Mold With EMBr |
WEI Jun1,4,SUN Yanhui2,CAI Kaike2,ZHOU Yingchao3,WEI Zukang3 |
1. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;3. Handan Iron and Steel Corp., Handan 065015, Hebei, China; 4. Chengde Jianlong Iron and Steel Corp., Chengde 067000, Hebei, China |
|
|
Abstract The analysis of CSP mold with EMBr at HANDAN iron and steel corp.showed that 40% reduction of total oxygen and 61% reduction of macroinclusions can be realized and the quality of thin slabs can be improved effectively by EMBr. The experiments indicated that the range of level fluctuation of molten steel surface in the mold without EMBr is ±7mm and ±4 mm with EMBr.The threedimensional mathematical flow field and electromagnetic field models were developed to analyze the flow field in CSP mold by CFX software. Theoretical calculation showed that the maximum surface velocity at the center of meniscus with EMBr is 4 times lower than that without EMBr. The maximum turbulant kinetic energy at the center of meniscus with EMBr is also 3 times less than that without EMBr. The quality of thin slabs can be improved effectively by EMBr.
|
Received: 01 January 1900
|
|
|
|
[1] |
HUANG Caide,HE Wenyuan,LIU Yanqiang,XIAO Maoyuan,. Effect of electromagnetic braking on flow field in #br#
tinplate under high casting speed[J]. Iron and Steel, 2019, 54(8): 90-101. |
[2] |
. Physical-mathematical simulation and application of flow control devices optimization in two-strand tundish[J]. , 2019, 44(4): 0-0. |
[3] |
LU Juan,WANG Jian-jun,YUE Qiang,. Numerical simulation of 3D electromagnetic field generated by electromagnetic brake in a slab continuous casting mold[J]. Chinese Journal of Iron and Steel, 2017, 42(03): 58-63. |
[4] |
LI Zhuang,XU Yu,WANG En-gang. Experimental on the interface fluctuation behavior of liquid metal with vertical electromagnetic brake in continuous casting mold[J]. Chinese Journal of Iron and Steel, 2016, 41(6): 15-20. |
[5] |
LI Zhuang,XU Yu,WANG En-gang. Numerical study on behavior of steel/slag interface and fluid flow in electromagnetic continuous casting mold of slab[J]. Chinese Journal of Iron and Steel, 2016, 41(2): 1-8. |
[6] |
LIU He-ping. State of the art of numerical simulation of magneto-hydro dynamics in the continuous casting process[J]. Chinese Journal of Iron and Steel, 2015, 1(1): 7-16. |
|
|
|
|