|
|
Optimized Configuration of AlloySteel Bar Production Using EAF Process |
YANG Zhenguo1,2,LIU Qing1,DONG Jieji2 |
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;2. Special Steel Plants, Laiwu Steel Corporation, Laiwu 271105, Shandong, China |
|
|
Abstract With the development of the alloysteel and continuous casting technology at home and broad in recent years,the authors put forward some suggestions for the alloy steel bar production by using EAF steelmaking process.And the practicability of matching eight kinds of EAF with continuous casters and rolling mills to produce modern bar is also discussed.The popular trend in the world in EAF steel manufacture process (1 EAF→1 refining furnace→1 continuous caster→1 main rolling mill) is that the capacity of over 100 tons EAF is widely used.But this is too high,and it will need too many cast strands of the continuous caster on the one hand and too bigger form of section on the other,which will impose difficulty on providing the suitable rolling mill to match with it.As a result,this EAF suits the plate plant better rather than alloy bar plant.Based on the current fact that the special steel plant uses EAF to produce machinery and the products are more used in the automobile industry,5090 tons EAF is the reasonable choice to produce bar steel, and the production scale should be limited to 40×104×90×104 t/a.
|
Received: 01 January 1900
|
|
|
|
[1] |
SHANGGUAN Fang-qin, LI Xiu-ping, ZHOU Ji-cheng, WANG Fang-jie, BU Qing-cai, ZHANG Chun-xia. Strategic research on development of steel scrap resources in China[J]. Iron and Steel, 2020, 55(6): 8-14. |
[2] |
WANG Xinjiang. Technological progress of EAF steelmaking in China[J]. Iron and Steel, 2019, 54(8): 1-8. |
[3] |
CHEN Chang,LI Yang,,ZHANG Yan-hao,CHEN Xu-fang,HE Huan-yu,NI Hong-wei. Effect of pretreatment on magnetic property of synthesized Ni-Zn ferrite from electric arc furnace dust[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(7): 628-636. |
[4] |
MA Li-dong,,HUANG Qing-xue,,CHEN Shuo,MA Hao-xi. Optimization of varying curvature profile of two-roll bar straightener[J]. Iron and Steel, 2018, 53(9): 45-52. |
[5] |
LIU Xiao-bin,AN Jie,LIU Gui-jiang,WANG Zhe, LI Tao. Analysis of internal inclusion in automobile gear steel bar[J]. , 2018, 36(6): 46-49. |
[6] |
LI Jun,ZHANG Ling-ling,ZHAO Gui-zhou,CANG Da-qiang. Pilot practice of direct modification of molten blast furnace slag and preparation of mineral wool fiber[J]. Iron and Steel, 2017, 52(9): 99-103. |
|
|
|
|