|
|
Study on Skin Passing Technology of Non-oriented Silicon Steel |
|
|
|
|
Abstract The shape and surface quality are important quality index of non-oriented silicon steel strip. Considering the lamination factor, the non-oriented silicon steel must have a smooth surface and good shape. According to the characteristics of production technology of non-oriented silicon steel strip, a mathematic model that design the roll shape and the skin passing technology is construct.In this model, the uniformity of the distribution of front tension is taken as the objective function. Based on this, a skin passing technology of non-oriented silicon steel strip and temper mill’s roll shape is developed. In this skin passing technology, the rolling force is about 80~200KN, the skin passing tension is about 10~40MPa, the skin-pass rate is Less than 0.1%. The application of this technology in industry shows that the new roll shapes and the skin passing technology not only guarantee the shape and surface quality of non-oriented silicon steel strip, but also guarantee the non-oriented silicon steel’s electromagnetic performance.
|
Received: 26 May 2009
|
|
|
|
[1] |
SUN Chao-fan, FANG Yuan, WANG Ya-qing, LIU Wei. Influence of temper rolling reduction rate on microstructure and mechanical properties of TS290 steel[J]. Iron and Steel, 2020, 55(6): 75-79. |
[2] |
BAI Zhen-hua1,2, XU Ji-shuan1, DONG Hang-zhe1, SHEN Li-tao1. Roller roughness attenuation model in leveling rolling process[J]. Iron and Steel, 2019, 54(4): 43-48. |
[3] |
TANG Wei, DU Feng-shan, WEN Jie, LIN Hai-hai. Research and application of warping control strategy on tinplate[J]. Iron and Steel, 2019, 54(12): 55-61. |
[4] |
MA Bingzhi1,QI Chunyu1,LOU Decheng1,ZHANG Yudong2. Surface roughness control technology of galvanized sheet skinpass rolling process[J]. Iron and Steel, 2019, 54(10): 91-95. |
[5] |
HU Zhi- yuan,REN Qiang,ZHANG Li- feng. Evolution of oxide inclusions in W800 non- oriented electrical steel[J]. , 2018, 30(4): 282-287. |
[6] |
SONG Guang-yi,YANG Quan,WANG Xiao-chen,ZHANG Xi-bang, WANG Feng-mei,WANG Qiu-na. Work roll wear law for hot strip temper mill[J]. Iron and Steel, 2017, 52(9): 54-59. |
|
|
|
|