核岛用P280GH钢的冷却相变过程及数值模拟

doi:10.13228/j.boyuan.issn0449-749x.20160207

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the phase transformation of P280GH steel nuclear power tube during cooling process after hot-roll process， the CCT and TTT transformation kinetics curves were measured by using physical simulation method. The results show that coarse ferrite and pearlite form at low cooling rates and the low-temperature microstructure phase can be reduced by increasing the cooling rate. When the cooling rate is more than 10 ℃/s， bainite begins to appear. Based on the superposition principle， the numerical model of the cooling process of the test steel is established by using the finite element method. The temperature field and the evolution of phase transformation along the direction of the wall thickness of the P280GH steel specimen with dimensions of [?219.1 mm]×18.26 mm were analyzed for air cooling and water cooling， respectively. The results show that the microstructure under air cooling condition is homogeneous pearlite， and there is no bainite and retained austenite. The microstructure under water cooling condition is martensite， and the difference between the internal surface and the external surface was 3.6%， which is basically consistent with that of the actual heat treatment. The research results can provide guidance for the cooling process of hot rolling P280GH steel pipe production.

Received: 18 May 2016 Published: 09 December 2016

PACS:

TG142.2

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YU Hui
	LIU Li-Gang
	YU Xiu-Lin
	HUANG Hong-Shou
	FENG Qiang

Cite this article:

YU Hui,LIU Li-Gang,YU Xiu-Lin等. Cooling phase transformation and numerical simulation of nuclear steel P280GH[J]. Iron and Steel, 2016, 51(12): 58-64.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20160207 OR http://www.chinamet.cn/Jweb_gt/EN/Y2016/V51/I12/58

[1]	刘正东, 程世长, 干勇, 等. 中国电站用钢技术现状和未来发展[J]. 钢铁, 2011, 46(3): 1-5.
[1]	刘正东, 程世长, 干勇, 等. 中国电站用钢技术现状和未来发展[J]. 钢铁, 2011, 46(3): 1-5.
[2]	YAN Qiang, WANG Anjian, WANG Gaoshang, etal. Nuclear power development in China and uranium demand forecast: Based on analysis of global current situation[J]. Progress in Nuclear Energy, 2011, (53): 742-747.
[2]	YAN Qiang, WANG Anjian, WANG Gaoshang, etal. Nuclear power development in China and uranium demand forecast: Based on analysis of global current situation[J]. Progress in Nuclear Energy, 2011, (53): 742-747.
[3]	郭元蓉, 刘昊, 胡铂, 等. 压水堆核电站用无缝钢管P280GH的研制[J]. 钢管, 2011, 40(1): 24-28.
[3]	郭元蓉, 刘昊, 胡铂, 等. 压水堆核电站用无缝钢管P280GH的研制[J]. 钢管, 2011, 40(1): 24-28.
[4]	粘志宇. 核电站常规岛主要汽水管道材质选择和规格计算[J]. 吉林电力, 2012, 40(5): 9-11.
[4]	粘志宇. 核电站常规岛主要汽水管道材质选择和规格计算[J]. 吉林电力, 2012, 40(5): 9-11.
[5]	Nanba S, Kitamura M. Prediction of microstructure distribution in the through-thickness direction during and after hot rolling in carbon steels [J]. ISIJ International.1992, 32: 377-386.
[5]	Nanba S, Kitamura M. Prediction of microstructure distribution in the through-thickness direction during and after hot rolling in carbon steels [J]. ISIJ International.1992, 32: 377-386.
[6]	Bontchevaa N, Petzovb G. Microstructure Evolution During Metal Forming Processes [J]. Computational Materials Science, 2003, (28):563-573.
[6]	Bontchevaa N, Petzovb G. Microstructure Evolution During Metal Forming Processes [J]. Computational Materials Science, 2003, (28):563-573.
[7]	Jang Y S, Ko D C, Kim B M. Application of the Finite Element Method to Predict Microstructure Evolution in the Hot Forging of Steel [J]. Journal of Materials Processing Technology, 2000, 101:85-94.
[7]	Jang Y S, Ko D C, Kim B M. Application of the Finite Element Method to Predict Microstructure Evolution in the Hot Forging of Steel [J]. Journal of Materials Processing Technology, 2000, 101:85-94.
[8]	Serajzadeh S, Taheri A K. An investigation into the effect of carbon on the kinetics of dynamic restoration and flow behavior of carbon steels [J]. Mechanics of Materials. 2003, 35(7):653-660.
[8]	Serajzadeh S, Taheri A K. An investigation into the effect of carbon on the kinetics of dynamic restoration and flow behavior of carbon steels [J]. Mechanics of Materials. 2003, 35(7):653-660.
[9]	吴迪, 李壮, 吕伟. 超高强铁素体/贝氏体双相钢的控轧控冷[J]. 钢铁, 1999,34(1): 35-38.
[9]	吴迪, 李壮, 吕伟. 超高强铁素体/贝氏体双相钢的控轧控冷[J]. 钢铁, 1999,34(1): 35-38.
[10]	王敏婷, 李学通, 刘晓东, 等. 非调质钢40MnV 热变形后冷却相变动力学[J]. 材料热处理学报, 2014, 35(9): 49-54.
[10]	王敏婷, 李学通, 刘晓东, 等. 非调质钢40MnV 热变形后冷却相变动力学[J]. 材料热处理学报, 2014, 35(9): 49-54.
[11]	惠亚军, 于洋, 王畅, 等. 铌-钛微合金化高强钢连续冷却的相变规律[J]. 钢铁研究学报, 2014, 26(12): 42-46.
[11]	惠亚军, 于洋, 王畅, 等. 铌-钛微合金化高强钢连续冷却的相变规律[J]. 钢铁研究学报, 2014, 26(12): 42-46.
[12]	Cory J H, Ondrej M, Michael C S, et al. Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments[J]. Acta Materialia, 2014,75:1-19
[12]	Cory J H, Ondrej M, Michael C S, et al. Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments[J]. Acta Materialia, 2014,75:1-19
[13]	Tomasz D, Adam B. The numerical model prediction of phase components and stresses distributions in hardened tool steel for cold work[J]. International Journal of Mechanical Sciences, 2015, 96-97:47-57
[13]	Tomasz D, Adam B. The numerical model prediction of phase components and stresses distributions in hardened tool steel for cold work[J]. International Journal of Mechanical Sciences, 2015, 96-97:47-57
[14]	Seoknyeon K, Jinwoo L, Frédéric B, et al. Transformation kinetics and density models of quenching and partitioning (Q&P) steels[J]. Acta Materialia, 2016, 109(1):394-404.
[14]	Seoknyeon K, Jinwoo L, Frédéric B, et al. Transformation kinetics and density models of quenching and partitioning (Q&P) steels[J]. Acta Materialia, 2016, 109(1):394-404.
[15]	Eun J S, Lawrence C, Yuri E, etal. Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel[J]. Acta Materialia, 2016, 113(10): 124-139.
[15]	Eun J S, Lawrence C, Yuri E, etal. Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel[J]. Acta Materialia, 2016, 113(10): 124-139.
[16]	郑泽花. 钢淬火换热系数计算及温度与微观组织模拟[D]. 大连, 大连理工大学, 2010.
[16]	郑泽花. 钢淬火换热系数计算及温度与微观组织模拟[D]. 大连, 大连理工大学, 2010.
[17]	孙剑亭. 轴类锻件热处理工艺模拟及试验研究[D]. 秦皇岛, 燕山大学, 2008.
[17]	孙剑亭. 轴类锻件热处理工艺模拟及试验研究[D]. 秦皇岛, 燕山大学, 2008.