|
Abstract In order to study the aggregation behavior of MgAl2O4 inclusions, single MgAl2O4 inclusions and multi-particle MgAl2O4 inclusions in magnesium-treated aluminum deoxidized mild steel were observed by metallographic sample method and organic solution electrolytic separation method combined with field emission scanning electron microscope. Thermodynamic calculation results indicate that MgAl2O4 inclusions are precipitated in the liquid phase. FactSage calculated the phase transformation law of inclusions in steel, and the predicted types of inclusions were consistent with the experimental observations. The analysis of the multi-particle MgAl2O4 inclusions shows that the cavity bridge force is much greater than the capillary force, van der Waals force, and viscous force. Therefore, the cavity bridge force is the main force that causes the aggregation of MgAl2O4 inclusions. The molten steel condition is that temperature increase and the low aO and low [pct S], cavity bridge force value is small, which causes the weakest aggregation ability of MgAl2O4 inclusions.
|
Received: 17 April 2020
Published: 16 October 2020
|
|
|
|
[1] Ma W, Bao Y, Wang M, et al. Effect of Mg and Ca treatment on behavior and particle size of inclusions in bearing steels[J]. ISIJ international. 2014, 54(3): 536.[2] Wang L, Yang S, Li J, et al. Effect of Mg addition on the refinement and homogenized distribution of inclusions in steel with different Al contents[J]. Metallurgical and Materials Transactions B. 2017, 48(2): 805.[3] Zou X, Zhao D. Sun J, et al. An integrated study on the evolution of inclusions in EH36 shipbuilding steel with Mg addition: from casting to welding[J]. Metallurgical and Materials Transactions B. 2018, 49(2): 481.[4] 王德永, 徐周, 屈天鹏. 镁处理对低碳微合金钢中夹杂物和凝固组织的影响[J]. 炼钢. 2017, 33(5): 12.WANG De-yong, XU Zhou, QU Tian-peng. Effect of Mg addition on inclusions and solidification structure in low carbon microalloy steels[J]. Steelmaking. 2017, 33(5): 12.[5] 郭振和, 邓丽琴. 镁钙处理对车轮钢中夹杂物及疲劳性能的影响[J]. 宝钢技术. 2016 (4): 16.GUO Zhen-he, DENG Li-qin. Effect of Mg and Ca treatment on inclusion and fatigue properties of wheel steel[J]. Baosteel Technology. 2016 (4): 16.[6] Zhang T, Liu C, Jiang M. Effect of Mg on behavior and particle size of inclusions in Al-Ti deoxidized molten steels[J]. Metallurgical and Materials Transactions B. 2016, 47(4): 2253.[7] 李太全, 包燕平, 刘建华, 等. 镁对X120管线钢夹杂物的作用[J]. 钢铁. 2008, 43 (11): 45.LI Tai-quan, BAO Yan-ping, LIU Jian-hua, et al. Effect of magnesium on morphology of non-metallic inclusions in X120-pipeline steel[J]. Iron and Steel. 2008, 43 (11): 45.[8] Jiang Z H, Wang C, Gong W, et al. Evolution of inclusions and change of as-cast microstructure with Mg addition in high carbon and high chromium die steel[J]. Ironmaking and Steelmaking. 2015, 42(9): 669.[9] 张庆松, 闵义, 许海生, 等. 硅镇静钢镁处理后夹杂物的生成及演变行为[J]. 钢铁. 2019, 54(4): 37.ZHANG Qin-song, MIN Yi, XU Hai-sheng, et al. Effect of magnesium treatment on formation and evolution of inclusion in Si-Mn deoxidized steel[J]. Iron and Steel. 2019, 54(4): 37.[10] Kimura S, Nakajima K, Mizoguchi S. Behavior of alumina-magnesia complex inclusions and magnesia inclusions on the surface of molten low-carbon steels[J]. Metallurgical and Materials Transactions B. 2001, 32(1): 79.[11] Du G, Li J, Wang Z B, et al. Effect of magnesium addition on behavior of collision and agglomeration between solid inclusion particles on H13 steel melts[J]. Steel Research International. 2017, 88(3): 1600185.[12] 张同生, 王德永, 张永启, 等. 铝, 镁脱氧钢中夹杂物的动态演变规律[J]. 东北大学学报 (自然科学版), 2014, 35(9): 1270.ZHANG Tong-sheng, WANG De-yong, ZHANG Yong-qi, et al. Dynamic evolution of inclusions in Al-Mg deoxidation melts[J]. Journal of Northeastern University(Natural Science). 2014, 35(9): 1270.[13] Wang H, Li J, Shi C B, et al. Evolution of Al2O3 inclusions by magnesium treatment in H13 hot work die steel[J]. Ironmaking and Steelmaking. 2017, 44(2): 128.[14] Cao L, Wang G , Yuan X, et al. Thermodynamics and agglomeration behavior on spinel inclusion in Al-deoxidized steel coupling with Mg treatment[J]. Metals. 2019, 9, 900.[15] Sasai K. Interaction between alumina inclusions in molten steel due to cavity bridge force[J]. ISIJ International. 2016, 56(6): 1013.[16] Wang G, Li S, Ai X, et al. Characterization and thermodynamics of Al2O3-MnO-SiO2 (-MnS) inclusion formation in carbon steel billet[J]. Journal of Iron and Steel Research International. 2015, 22(7): 566.[17] Chen P, Zhu C, Li G, et al. Effect of sulphur concentration on precipitation behaviors of MnS-containing inclusions in GCr15 bearing steels after LF refining[J]. ISIJ International. 2017, 57(6):1019.[18] Bi Y, Karasev A V, J?nsson P G. Evolution of different inclusions during ladle treatment and continuous casting of stainless steel[J]. ISIJ international. 2013, 53(12): 2099.[19] Park J H, Lee S B, Gaye H R. Thermodynamics of the formation of MgO-Al2O3-TiOx inclusions in Ti-stabilized 11Cr ferritic stainless steel[J]. Metallurgical and Materials Transactions B. 2008, 39(6): 853.[20] Wu Z, Zheng W, Li G, et al. Effect of inclusions’ behavior on the microstructure in Al-Ti deoxidized and magnesium-treated steel with different aluminum contents[J]. Metallurgical and Materials Transactions B. 2015, 46(3): 1226.[21] Song M M, Hu C L, Song B, et al. Effect of Ti-Mg treatment on the impact toughness of heat affected zone in 0.15% C-1.31% Mn steel[J]. Steel Research International. 2018, 89(3): 1700355.[22] Wen B, Song B, Pan N, et al. Effect of SiMg alloy on inclusions and microstructures of 16Mn steel[J]. Ironmaking and Steelmaking. 2011, 38(8): 577.[23] Wang L, Li J, Ning B, et al. Effects of magnesium on wear resistance of H13 steel[J]. Materials Transactions. 2014, 55(7): 1104.[24] Zhu L, Wang Y, Wang S, et al. Research of microalloy elements to induce intragranular acicular ferrite in shipbuilding steel[J]. Ironmaking and Steelmaking. 2019, 46(6): 499.[25] Yin H, Shibata H, Emi T, et al. "In-situ" observation of collision, agglomeration and cluster formation of alumina inclusion particles on steel melts[J]. ISIJ International. 1997, 37(10): 936.[26] Yin H, Shibata H, Emi T, et al. Characteristics of agglomeration of various inclusion particles on molten steel surface[J]. ISIJ international. 1997, 37(10): 946.[27] Shibata H, Yin H, Yoshinaga S, et al. In-situ observation of engulfment and pushing of nonmetallic inclusions in steel melt by advancing melt/solid interface[J]. ISIJ international. 1998, 38(2): 149.[28] Fang C M, Parker S C, De W G. Atomistic simulation of the surface energy of spinel MgAl2O4[J]. Journal of the American Ceramic Society. 2000, 83(8): 2082.[29] Kimura S, Nabeshima Y, Nakajima K, et al. Behavior of nonmetallic inclusions in front of the solid-liquid interface in low-carbon steels[J]. Metallurgical and Materials Transactions B. 2000, 31B(5), 1013.[30] Snead L L, Zinkle S J, White D P. Thermal conductivity degradation of ceramic materials due to low temperature, low dose neutron irradiation[J]. Journal of Nuclear Materials. 2005, 340(2-3):187. [31] Johnson J L, German M R. Solid-state contributions to densifification during liquid-phase sintering[J]. Metallurgical and Materials Transactions B. 1996, 27B(6): 901. |
[1] |
XIE Ji-xiang1,2,LIU Liu1,LIN Teng-chang1,YANG Li-bin1. Physical simulation of 210 t RH furnace[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(9): 780-787. |
[2] |
LI Chao, LI Jian-xin, LIU Zhan-li, ZHANG Fei, JIANG Jing-yu, LI Jie. Production process of low-cost clean steel for wide and heavy plate[J]. Iron and Steel, 2020, 55(9): 38-42. |
[3] |
LI Zhi-ying1,2,LI Chang-rong1,2,ZENG Ze-yun1,CHEN Long-hai1,LI Zheng-song3,LIU Zhan-lin3. Thermodynamic study of carbide and nitride precipitation of niobium in 500MPa highstrength antiseismic rebars[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(8): 727-733. |
[4] |
TIAN Jun1,WANG De-yong1,QU Tian-peng1,HOU Dong1,GE Wen-ying2,LIU Bing2. MnS precipitation and growth during solidification of nonquenched and tempered steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(8): 740-745. |
[5] |
REN Qiang, JIANG Dong-bin, ZHANG Li-feng, LIU Lin-gang, WEN Yu-bing, CHEN Wei. Evolution and formation mechanism of inclusions in a Q235 steel[J]. Iron and Steel, 2020, 55(7): 47-52. |
[6] |
LIU Zong-hui, QIN Feng-ting, REN Jian-zhong, ZHU Miao-yong. Effect of two-step slag making refining on sulfur and aluminum in C82DA steel[J]. Iron and Steel, 2020, 55(7): 78-84. |
|
|
|