典型钢铁制造流程碳排放及碳中和实施路径

doi:10.13228/j.boyuan.issn0449-749x.20220476

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (5214 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The blast furnace-blast oxygen furnace (BF-BOF) steel production process is a typical iron and steel process,and also is typical iron-coal chemical process with high energy consumption and large carbon emissions,which is in a key area for Chinese iron and steel industry to achieve the goal of carbon neutrality. In 2020,the production of steel produced by this process accounted for over 90% of the national crude steel production,and the BF-BOF steel process is an important source of CO₂ emissions in the iron and steel industry. Therefore,the carbon emission calculation and carbon neutralization path research of companies based on the typical BF-BOF steel process has attracted attention. At present,there are a variety of calculation methods for carbon emissions of iron and steel companies at home and abroad,but different CO₂ calculation boundaries and methods have great differences in the results of companies′ CO₂ emissions,and the influencing factors are also different. The carbon emission characteristics of the steel production process are introduced. Taking a typical production process as an example,it analyzes the carbon emission,carbon emission accounting methods,and influencing factors of the whole steel process from the perspective of system boundary,and calculates the carbon emissions of 3.9 million tons and 5.5 million tons of iron and steel companies under different methods,and compares the differences between different calculation methods. The results show that the proportion of CO₂ emissions in the pre-iron process of company A and company B to the total carbon emissions is 60.99% and 54.12%,respectively. Coking,sintering and ironmaking processes should be given priority to reduce CO₂ emissions in the iron- and steelmaking process. The factors affecting the emission reduction in the iron- and steelmaking process mainly include the consumption of fossil fuels,the recovery rate of energy,the proportion of self-generated electricity and the selection of carbon emission factors. Among them,the consumption of fossil fuels accounts for more than 80% of the total CO₂ emissions,which is the largest source of CO₂ emissions from the iron- and steelmaking process. Meanwhile,the application effects and carbon emission reduction paths of different technologies and measures are analyzed with the goal of carbon neutrality of the whole steel process,which is to provide a theoretical basis for iron and steel companies to achieve the carbon peak-carbon neutrality goal and a useful reference for companies to formulate a carbon neutrality roadmap.

Key words： iron-and steelmaking process CO₂ emission energy saving low-carbon technology carbon neutrality

Received: 12 July 2022

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Qi
	SHEN Jia-lin
	JI Yang-mei

Cite this article:

ZHANG Qi,SHEN Jia-lin,JI Yang-mei. Analysis of carbon emissions in typical iron- and steelmaking process and implementation path research of carbon neutrality[J]. Iron and Steel, 2023, 58(2): 173-187.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20220476 OR http://www.chinamet.cn/Jweb_gt/EN/Y2023/V58/I2/173

[1] 项目综合报告编写组. 《中国长期低碳发展战略与转型路径研究》综合报告[J]. 中国人口·资源与环境,2020,30(11):1. (Project Comprehensive Report Writing Group. Comprehensive report of "Research on China′s long-term low-carbon development strategy and transformation path"[J]. China Population,Resources and Environment,2020,30(11):1.)
[2] 中共中央国务院关于完整准确全面贯彻新发展理念做好碳达峰碳中和工作的意见[N]. 人民日报,2021-10-25(001). (Opinions of the State Council on completely,accurately and comprehensively implementing the new development concept and doing a good job in carbon neutralization[N]. People′s Daily,2021-10-25(001).)
[3] 2030年前碳达峰行动方案[N]. 人民日报,2021-10-27(007). (Action plan for carbon peaking by 2030[N]. People′s Daily,2021-10-27(007).)
[4] WSA. 2021 World Steel in Figures[EB/OL]. [2021-05-01]. https://worldsteel.org/wp-content/uploads/2021-World-Steel-in-Figures.pdf.
[5] 张琦,蔡九菊. 钢铁制造流程系统节能与能效提升[J]. 钢铁,2021,56(8):32. (ZHANG Qi,CAI Jiu-ju. Systemic energy saving and energy efficiency improving of iron and steelmaking process[J]. Iron and Steel,2021,56(8):32.)
[6] YIN R,LIU Z,SHANGGUAN F. Thoughts on the implementation path to a carbon peak and carbon neutrality in China′s steel industry[J]. Engineering,2021,7(12):1680.
[7] 刘宏强,付建勋,刘思雨,等. 钢铁生产过程二氧化碳排放计算方法与实践[J]. 钢铁,2016,51(4):74. (LIU Hong-qiang,FU Jian-xun,LIU Si-yu,et al. Calculation methods and application of carbon dioxide emission during steel-making process[J]. Iron and Steel,2016,51(4):74.)
[8] 李肖如,谢华生,寇文,等. 钢铁行业不同二氧化碳排放核算方法比较及实例分析[J]. 安全与环境学报,2016,16(5):320. (LI Xiao-ru,XIE Hua-sheng,KOU Wen,et al. Discussion and case study on the CO₂ emission calculation methods in iron and steel industry[J]. Journal of Safety and Environment,2016,16(5):320.)
[9] 卢中强,陈红举,郝宗超,等. 钢铁企业二氧化碳排放计算修正方法探讨[J]. 河南科学,2019,37(8):1317. (LU Zhong-qiang,CHEN Hong-ju,HAO Zong-chao,et al. Discussion on correction method of carbon dioxide emission in iron and steel enterprises[J]. Henan Science,2019,37(8):1317.)
[10] IEA. Iron and Steel Technology Roadmap Towards More Sustainable Steelmaking[EB/OL]. [2020-10-19]. https://www.iea.org/reports/iron-and-steel-technology-roadmap.
[11] 张琦,张薇,王玉洁,等. 中国钢铁工业节能减排潜力及能效提升途径[J]. 钢铁,2019,54(2):7. (ZHANG Qi,ZHANG Wei,WANG Yu-jie,et al. Potential of energy saving and emission reduction improvement of China′s iron and steel industry[J]. Iron and Steel,2019,54(2):7.)
[12] Hasanbeigi A,Price L,Fino-Chen C,et al. Retrospective and prospective decomposition analysis of Chinese manufacturing energy use and policy implications[J]. Energy Policy,2013,63:562.
[13] 薛英岚,张静,刘宇,等. “双碳”目标下钢铁行业控煤降碳路线图[J]. 环境科学,2022,43(10):102. (XUE Ying-lan,ZHANG Jing,LIU Yu,et al. Roadmap of coal control and carbon reduction in the steel industry under the carbon peak and neutralization target[J]. Environment Science,2022,43(10):102.)
[14] 邵远敬,徐蕾,刘校平,等. 中国钢铁生产“碳中和”解决方案探讨[J]. 中国冶金,2022,32(4):1. (SHAO Yuan-jing,XU Lei,LIU Xiao-ping,et al. Discussion on solution of "carbon neutrality" in China′s steel production[J]. China Metallurgy,2022,32(4):1.)
[15] REN L,ZHOU S,PENG P,et al. A review of CO₂ emissions reduction technologies and low-carbon development in the iron and steel industry focusing on China[J]. Renewable and Sustainable Energy Reviews,2021,143,110846.
[16] 工业和信息化部,国家发展改革委,生态环境部. 工业领域碳达峰实施方案[EB/OL]. [2022-08-01]. http://www.gov.cn/zhengce/zhengceku/2022-08/01/content_5703910.htm. (The Ministry of Industry and Information Technology,The National Development and Reform Commission,The Ministry of Ecology and Environment. Carbon peaking implementation plan in the industrial field[EB/OL]. [2022-08-01]. http://www.gov.cn/zhengce/zhengceku/2022-08/01/content_5703910.htm.)
[17] Mission Possible Partnership. Net-zero steel sector transition strategy[EB/OL]. [2021-10-12]. http://missionpossiblepartnership.org/wp-content/uploads/2021/10/MPP-Steel-Transition-Strategy-Oct-2021.pdf.
[18] IPCC. Guidelines for national greenhouse gas inventories[EB/OL]. 2006 [2022-10-12]. https://www.ipcc.ch/report/2006-ipcc-guidelines-for-national-greenhouse-gas-inventories/.
[19] WSA. CO₂ emissions data collection user guide,Version 6[EB/OL]. 2014. [2022-10-12]. https://worldsteel.org/steel-topics/Datacollection-user-guide_v6/document/Data%20 collection%20user%20 guide.pdf.
[20] 国家发展和改革委员会应对气候变化司. GB/T 32151.5—2015 温室气体排放核算与报告要求第5部分:钢铁生产企业[S]. 北京:中国标准出版社,2016.(Department of Addressing Climate Change,National Development and Reform Commission. GB/T 32151.5—2015 Greenhouse Gas Emission Accounting and Reporting Requirements-Part 5:Iron and Steel Production Enterprises[S]. Beijing:Standards Press of China,2016.)
[21] 国家发改委. 中国钢铁生产企业温室气体排放核算方法与报告指南(试行)[EB/OL]. [2013-11-04]. https://www.ndrc.gov.cn/xxgk/zcfb/tz/201311/t20131101_963960.html?code=&state=123. (National Development and Reform Commission. Greenhouse gas emission accounting methods and reporting guidelines for Chinese steel production enterprises(Trial) [EB/OL]. [2013-11-04]. https://www.ndrc.gov.cn/xxgk/zcfb/tz/201311/t20131101_963960.html?code=&state=123.)
[22] 李新创,李冰. 全球温控目标下中国钢铁工业低碳转型路径[J]. 钢铁,2019,54(8):224. (LI Xin-chuang,LI Bing. Low carbon transition path of China′s iron and steel industry under global temperature-control target[J]. Iron and Steel,2019,54(8):224.)
[23] 上官方钦,刘正东,殷瑞钰. 钢铁行业“碳达峰”“碳中和”实施路径研究[J]. 中国冶金,2021,31(9):15. (SHANGGUAN Fang-qin,LIU Zheng-dong,YIN Rui-yu. Study on implementation path of "carbon peak" and "carbon neutrality" in steel industry in China[J]. China Metallurgy,2021,31(9):15.)
[24] Kimihito S. Overview and research examples of CCU,carbon dioxide capture and utilization from steel-making industry[J]. Nippon Technology Report,2021,417(5):45.
[25] Michitaka S,Kiyoshi F,Shinji H. Recent development of ironmaking technology in JFE steel toward carbon neutrality[J]. JFE Technology Report,2022,49(2):1.
[26] 崔志峰,徐安军,上官方钦. 国内外钢铁行业低碳发展策略分析[J]. 工程科学学报,2022,44(9):1496. (CUI Zhi-feng,XU An-jun,SHANGGUAN Fang-qin. Low carbon development strategy analysis of the domestic and foreign steel industry[J]. Chinese Journal of Engineering,2022,44(9):1496.)
[27] 严珺洁. 超低二氧化碳排放炼钢项目的进展与未来[J]. 中国冶金,2017,27(2):6. (YAN Jun-jie. Progress and future of ultra-low CO₂ steel making program[J]. China Metallurgy,2017,27(2):6.)
[28] 代铭玉. 安赛乐米塔尔应对全球碳排放挑战的战略[J]. 冶金管理,2019(18):32. (DAI Ming-yu. ArcelorMittal′s strategy to meet the challenge of global carbon emissions[J]. China Steel Focus,2019(18):32.)
[29] 韩扬眉. 中国工程院发布《我国碳达峰碳中和战略及路径》成果[N]. 中国科学报,2022-04-01(001). (HAN Yang-mei. The Chinese Academy of Engineering released the results of "China′s carbon neutralization strategy and path to peak carbon"[N]. Chinese Academy of Sciences,2022-04-01(001).
[30] 邵志媛. 发挥能效标准引领作用实现企业绿色发展与全社会减排“双赢”[N]. 中国产经新闻,2021-11-30(002). (SHAO Zhi-yuan. Give full play to the leading role of energy efficiency standards to achieve a "win-win" for the green development of enterprises and the emission reduction of the whole society[N]. China Industrial Economy News,2021-11-30(002).)
[31] 贾林海. 何文波:稳步有序如期实现“双碳”目标为低碳中国贡献钢铁力量[N]. 中国冶金报,2022-05-10(001). (JIA Lin-hai. HE Wen-bo:Achieving the "Double carbon" goal steadily and orderly and contributing to low-carbon China[N]. China Metallurgical News,2022-05-10(001).)
[32] 国家工信部. 工业和信息化部等六部门关于印发工业能效提升行动计划的通知[EB/OL]. [2022-06-29]. https://www.miit.gov.cn/jgsj/jns/nyjy/art/2022/art_c43d89e0b209438 bad7f7baa28606273.html. (Ministry of Industry and Information Technology. Notice of six departments including the ministry of industry and information technology on printing and distributing the action plan for industrial energy efficiency improvement[EB/OL]. [2022-06-29]. https://www.miit.gov.cn/jgsj/jns/nyjy/art/2022/art_c43 d89e0b209438bad7f7 baa28606273.html.)
[33] 徐向阳,任明,高俊莲. 京津冀地区钢铁行业节能和CO₂减排的技术路径[J]. 生态经济,2017,33(11):38. (XU Xiang-yang,RENG Ming,GAO Jun-lian. Technology path of energy conservation and CO₂ emissions reduction of iron and steel industry in Jing-Jin-Ji[J]. Ecological Economy,2017,33(11):38.)
[34] 胡建红,蔺文涛,杨源满. 恒壁温焦炉上升管荒煤气余热回收技术应用[J]. 冶金能源,2018,37(4):54. (HU Jian-hong,LIN Wen-tao,YANG Yuan-man. Application of constant temperature raw coke oven gas sensible heat recovery technology in ascension pipe[J]. Energy for Metallurgical Industry,2018,37(4):54.)
[35] 张琦,王小壮,许立松,等. 钢铁流程资源-能源-碳排放耦合关系及分析[J]. 钢铁,2020,55(10):103. (ZHANG Qi,WANG Xiao-zhuang,XU Li-song,et al. Analysis on coupling relationship of resources-energy-carbon emissions in steel production[J]. Iron and Steel,2020,55(10):103.)
[36] 张琦,沈佳林,许立松. 中国钢铁工业碳达峰及低碳转型路径[J]. 钢铁,2021,56(10):152. (ZHANG Qi,SHEN Jia-lin,XU Li-song. Carbon peak and low-carbon transition path of China′s iron and steel industry[J]. Iron and Steel,2021,56(10):152.)
[37] 李茂权. 钢铁企业界面优化的节能和效益分析[J]. 冶金管理,2021(18):44. (LI Mao-quan. Energy saving and benefit analysis of interface optimization in iron and steel enterprises[J]. China Steel Focus,2021(18):44.)
[38] 季书民. 八钢低碳冶金技术路径研究及实践探讨[J]. 新疆钢铁,2022(1):5. (JI Shu-min. Research and practice of low carbon metallurgy technology path in Bayi steel[J]. Xinjiang Iron and Steel,2022(1):5.)
[39] 于恒,周继程,郦秀萍,等. 气基竖炉直接还原炼铁流程重构优化[J]. 中国冶金,2021,31(1):31. (YU Heng,ZHOU Ji-cheng,LI Xiu-ping,et al. Reconstruction optimization of gas-based shaft furnace direct reduction ironmaking process[J]. China Metallurgy,2021,31(1):31.)
[40] 世界金属导报. 浦项钢铁公司低碳发展路径研究[EB/OL]. [2021-05-30]. http://www.worldmetals.com.cn/. (World Metals. Research on the low-carbon development path of Pohang steel company[EB/OL]. [2021-05-30]. http://www.worldmetals.com.cn/.)
[41] ZHANG Q,XU J,WANG Y,et al. Comprehensive assessment of energy conservation and CO₂ emissions mitigation in China′s iron and steel industry based on dynamic material flows[J]. Applied Energy,2018,209:251.
[42] 贾林海. 多措并举推动绿色低碳发展[N]. 中国冶金报,2022-05-10(001). (JIA Lin-hai. Taking multiple measures to promote green and low-carbon development[N]. China Metallurgical News,2022-05-10(001).)
[43] 张琦,向婷,田硕硕. 钢铁-化工联产系统构建及未来发展趋势[J/OL]. 钢铁研究学报[2022-10-12].DOI:10.13228/j.boyuan.issn/1001-0963.20220126.(ZHANG Qi,XIANG Ting,TIAN Shuo-shuo. Construction and future development trend of steel-chemical cogeneration system[J/OL]. Journal of Iron and Steel Research[2022-10-12].DOI:10.13228/j.boyuan.issn/1001-0963.20220126.)
[44] 王国栋,储满生. 低碳减排的绿色钢铁冶金技术[J]. 科技导报,2020,38(14):68. (WANG Guo-dong,CHU Man-sheng. Green steelmaking technology with low carbon emission[J]. Science and Technology Review,2020,38(14):68.)
[45] Tanzer S E,Blok K,Ramírez A. Can bioenergy with carbon capture and storage result in carbon negative steel?[J]. International Journal of Greenhouse Gas Control,2020,100:103104.
[46] Lerede D,Bustreo C,Gracceva F,et al. Techno-economic and environmental characterization of industrial technologies for transparent bottom-up energy modeling[J]. Renewable and Sustainable Energy Reviews,2021,140:110742.
[47] 李洪福. 钢铁制造流程系统节能理论与方法的探讨及应用实践[J]. 冶金能源,2020,39(2):8. (LI Hong-fu. Discussion on and application of theory and method of systematic energy saving in iron and steel manufacturing process[J]. Energy for Metallurgical Industry,2020,39(2):8.)