数据驱动的转炉智能吹炼控制系统的开发与应用

doi:10.13228/j.boyuan.issn0449-749x.20230384

Abstract
Figure/Table
References
Related Citation (12)

Download: PDF (8592 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract At present, the mainstream "automatic steel-making" in domestic and foreign converter steel-making plants is mostly the traditional static fixed model framework of converter "one-button steel-making". Due to its high dependence on objective factors such as the stability of raw materials entering the furnace, the accuracy of the static model, and the adaptability of the gun position model, there are many drawbacks in practical production applications, which limits the development of converter automatic steel-making. In order to achieve a higher level of intelligence in automatic steel-making of converters, the research and development team has been conducting experiments on multiple large converters in recent years to develop an intelligent blowing control system based on real-time digital-driven and dynamic model architecture, which integrates application technologies such as furnace gas analysis, audio slagging, flame monitoring, and sub gun detection. The research and development team continues to conduct in-depth research on process difficulties such as slag operation, splashing back to dryness, and oxygen gun control during the blowing process. Through long-term data accumulation and observation practice, a digital-driven concept of "information perception, scientific analysis, intelligent decision-making, and feedback empowerment" has been refined and summarized to form a complete set of "mechanism model+empirical formula+data decision-making" digital-driven models, achieving the control of oxygen gun position, blowing flow rate, and The adaptive adjustment of parameters such as slag making and feeding, sub gun detection, etc. has achieved an "intelligent" blowing mode of "unmanned intervention" in the converter smelting process, basically solving the "pain points" problem of excessive dependence on raw materials and on-site operator experience in the converter process of steel-making plants. After the application of the converter intelligent converting system with data driven architecture, the oxygen lance position, flow and real-time slag condition in the converter converting process form a linkage, the slag melting effect is more stable, and the key process indicators such as dephosphorization rate, slag spilling rate, one turn qualification rate, FeO in slag, free oxygen in molten steel and so on are significantly improved, which has a positive effect on the control of Knock-down kit, iron and steel consumption in the converter process.

Key words： automatic steel-making one-button steel-making converter blowing control system converter process whole process furnace gas analysis audio frequency slag melting flame monitoring digital-driven

Received: 04 July 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Shuchao
	WANG Guodong
	SUN Jie
	PENG Wen
	ZHANG Dianhua
	YUAN Guo

Cite this article:

LIU Shuchao,WANG Guodong,SUN Jie等. Development and application of digital-driven converter intelligent blowing control system[J]. Iron and Steel, 2023, 58(9): 92-103.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20230384 OR http://www.chinamet.cn/Jweb_gt/EN/Y2023/V58/I9/92

[1] 周航,王肖,李朋,等. 基于炉气分析的转炉自动化炼钢工艺模型优化[J]. 河北冶金,2020,298(10):48.(ZHOU H,WANG X,LI P,et al. Optimization of BOF automatic steelmaking process model based on furnace gas analysis[J]. Hebei Metallurgy,2020,298(10):48.)
[2] 阚永海. 智能化炼钢模型在转炉炼钢的开发与应用[J]. 天津冶金,2019(4):1. (KAN Y H. Development and application of intelligent steelmaking model in converter steelmaking[J]. Tianjin Metallurgy,2019(4):1.)
[3] 徐钢,黎敏,徐金梧,等. 基于函数型数字孪生模型的转炉炼钢终点碳控制技术[J]. 工程科学学报,2019,41(4):521. (XU G,LI M,XU J W,et al. End-point carbon control technology for converter steelmaking based on functional digital twinning model[J]. Chinese Journal of Engineering,2019,41(4):521.)
[4] 《数字钢铁白皮书》编写组. 数字钢铁白皮书[M]. 2022版. 北京,冶金工业出版社,2022.(Digital Steel White Paper Writing Group. Digital Steel White Paper[M]. 2022 edition. Beijing:Metallurgical Industry Press,2022.)
[5] 刘志远,王重君,栾文林,等. 转炉炼钢智能制造关键技术的开发与应用[C]//2019年炼钢生产新工艺、新技术、新产品研讨会论文集. 宜兴:山东金属协会,2019:134. (LIU Z Y,WANG C J,LUAN W L,et al. Development and application of key technologies in BOF Intelligent Manufacturing[C]//Proceedings of the 2019 Symposium on New Processes,New Technologies and New Products in Steelmaking. Yixing:Shandong Institute of Metals,2019:134.)
[6] 高闯,沈明钢. 基于无约束小波权重TSVR的转炉炼钢终点静态预测模型[J]. 炼钢,2019,35(2):20. (GAO C,SHEN M G. Static prediction model of BOF steelmaking endpoint based on TSVR with unconstrained wavelet weight[J]. Steelmaking,2019,35(2):20.)
[7] 石艳,黄亚纯,曾维友,等. 转炉炼钢动态控制模型研究与工程应用[J]. 矿冶工程,2014,34(4):87. (SHI Y,HUANG Y C,ZENG W Y,et al. Study on dynamic control model of converter steelmaking and its engineering application[J]. Mining and Metallurgical Engineering,2014,34(4):87.)
[8] 何平,刘浏,赵进宣. 转炉炼钢综合智能型静态控制模型改进与应用[J]. 钢铁研究,2012,40(6):22. (HE P,LIU L,ZHAO J X. Improvement and application of integrated intelligent static control model for converter steelmaking[J]. Research on Iron and Steel,2012,40(6):22.)
[9] 王旭. 转炉炼钢智能化炼钢模型的开发与应用研究[J]. 山西冶金,2023,46(1):99. (WANG X. Development and application of intelligent steelmaking model for converter steelmaking[J]. Shanxi Metallurgy,2023,46(1):99.)
[10] 黄希祜. 钢铁冶金原理[M]. 北京:冶金工业出版社,2005. (HUANG X H. Principles of Iron and Steel Metallurgy[M]. Beijing:Metallurgical Industry Press,2005.)
[11] 梁连科. 冶金热力学及动力学[M]. 沈阳:东北工学院出版社,1990. (LIANG L K. Thermal and Dynamic Metallurgy[M]. Shenyang:Northeastern University Press,1990.)
[12] 安丰涛,郝建标,王文辉. 副枪测量与数据分析自动炼钢技术的应用[J]. 河北冶金,2019(5):47. (AN F T,HAO J B,WANG W H. Application of automatic steelmaking technology in sublayer measurement and data analysis[J]. Hebei Metallurgy,2019(5):47.)
[13] 薛志,郭伟达,李强笃,等. 转炉高效低成本智能炼钢新技术应用[J]. 山东冶金,2019,41(2):4. (XUE Z,GUO W D,LI Q D,et al. Application of high efficiency and low cost intelligent steelmaking technology in converter[J]. Shandong Metallurgy,2019,41(2):4.)
[14] 朱伟,陈凝,李旺洲,等. 基于BP网络误差预测的中小型转炉智能炼钢[J]. 新型工业化,2018,8(10):45. (ZHU W,CHEN N,LI W Z,et al. Intelligent steelmaking of medium and small BOF based on BP network error prediction[J]. New Industrialization,2018,8(10):45.)
[15] 吉利宏. 宣钢150 t转炉智能炼钢关键控制技术优化[J]. 河北冶金,2018(6):39. (JI L H. Optimization of key control technology for intelligent steelmaking of 150 t converter in Xuanhua Iron and Steel Co.[J]. Hebei Metallurgy,2018(6):39.)
[16] 郭伟达,李强笃,任科社,等. 转炉全流程智能炼钢控制技术开发与应用[J]. 山东冶金,2018,40(1):4. (GUO W D,LI Q D,REN K S,et al. Development and application of intelligent control technology for converter whole process steelmaking[J]. Shandong Metallurgy,2018,40(1):4.)
[17] 门志刚. 全新智能化自动炼钢技术在宣钢的应用[J]. 金属材料与冶金工程,2017,45(2):33. (MEN Z G. Application of new intelligent automatic steelmaking technology in Xuanhua Iron and Steel Co.[J]. Metal Materials and Metallurgy Engineering,2017,45(2):33.)
[18] 闫忠峰. 基于大数据的智能化自动炼钢技术[J]. 河北冶金,2017(3):19. (YAN Z F. Intelligent automatic steelmaking technology based on big data[J]. Hebei Metallurgy,2017(3):19.)
[19] 张德合. 解析转炉全封闭智能炼钢技术的开发和应用[J]. 企业技术开发,2014,33(26):21. (ZHANG D H. The development and application of fully enclosed intelligent steelmaking technology for converter are analyzed[J]. Technology Development,2014,33(26):21.)
[20] 姚应东. 基于神经网络的转炉炼钢碳温控制模型及智能专家系统[D]. 天津:天津理工大学,2014. (YAO Y D. Carbon Temperature Control Model and Intelligent Expert System for Converter Steelmaking Based on Neural Network[D]. Tianjin:Tianjin University of Technology,2014.)
[21] 代明桥. 基于机理与智能方法的转炉炼钢过程建模研究[D]. 大连:大连理工大学,2012. (DAI M Q. Study on BOF Steelmaking Process Modeling Based on Mechanism and Intelligent Method[D]. Dalian:Dalian University of Technology,2012.)
[22] 吕铭,毕永杰,李红建,等. 智能炼钢技术在莱钢120 t转炉上的研究与实践[J]. 中国冶金,2010,20(6):21. (LÜ M,BI Y J,LI H J,et al. Research and practice of intelligent steelmaking technology in 120 t converter of Laiwu Iron and Steel Co.[J]. China Metallurgy,2010,20(6):21.)
[23] 曲丽萍,曲永印,柳成. 转炉炼钢智能控制系统[J]. 北华大学学报(自然科学版),2006(5):474. (QU L P,QU Y Y,LIU C. Intelligent control system for converter steelmaking[J]. Journal of Beihua University(Natural Science),2006(5):474.)
[24] 庞新富,俞胜平,刘炜,等. 炼钢连铸动态智能调度系统的研究与开发[J]. 控制工程,2005(6):52. (PANG X F,YU S P,LIU W,et al. Research and development of dynamic intelligent scheduling system for steelmaking and continuous casting[J]. Control Engineering,2005(6):52.)
[25] 闫博. 转炉炼钢智能控制方法的研究[D]. 沈阳:东北大学,2005. (YAN B. Research on intelligent Control Method of Converter Steelmaking[D]. Shenyang:Northeastern University,2005.)
[26] 谢书明,陶钧,柴天佑. 转炉炼钢终点磷的智能预报[J]. 控制理论与应用,2003(4):555. (XIE S M,TAO J,CHAI T Y. Intelligent prediction of end-point phosphorus in converter steelmaking[J]. Control Theory and Applications,2003(4):555.)
[27] 许娜. 转炉炼钢智能终点锰、磷预报模型的开发[D]. 南京:江苏大学,2002. (XU N. Development of Intelligent Prediction Model for End-Point Manganese and Phosphorus in Converter Steelmaking[D]. Nanjing:Jiangsu University,2002.)
[28] 陶钧,柴天佑,李小平,等. 转炉炼钢智能控制方法及应用[J]. 控制理论与应用,2001(增刊1):129. (TAO J,CHAI T Y,LI X P,et al. Intelligent control method and application of converter steelmaking[J]. Control Theory and Applications,2001(s1):129.)
[29] 谢书明,孙廷玉,柴天佑,等. 转炉炼钢智能动态终点控制[J]. 控制理论与应用,2001(3):346. (XIE S M,SUN T Y,CHAI T Y,et al. Intelligent dynamic endpoint control for converter steelmaking[J]. Control Theory and Applications,2001(3):346.)
[30] 丁容,刘浏. 转炉炼钢过程人工智能静态控制模型[J]. 钢铁,1997,32(1):22. (DING R,LIU L. Artificial intelligence static control model of BOF steelmaking process[J]. Iron and Steel,1997,32(1):22.)