ժҪ A three-dimensional mathematical model for describing the electromagnetic field and flow field of molten steel in high casting speed slab continuous casting mold with electromagnetic level stabilizer (EMLS) system was developed, in which the effects of current intensity and frequency on the electromagnetic field and flow field were considered. Simulation results indicate that the electromagnetic force (EMF) along the mold width direction presents the centre-symmetric double-peak parabola distribution. The EMLS system leads to the flow velocity of molten steel decreases, especially near the free surface. Both the EMF increases with the current intensity and frequency (in the range of optimum frequency value), so the flow velocity of molten steel in the mold decreases obviously. As the current intensity increases from 800 A to 1000 A, the maximum free surface velocity decreases from 0.515 m/s without magnetic field to 0.155 m/s and 0.12 m/s, respectively. While the current frequency increases from 2 Hz to 6 Hz, the maximum surface velocity decreases from 0.177 m/s to 0.101m/s. The molten steel flow in mold is influenced obviously by the current intensity and frequency.
Abstract��A three-dimensional mathematical model for describing the electromagnetic field and flow field of molten steel in high casting speed slab continuous casting mold with electromagnetic level stabilizer (EMLS) system was developed, in which the effects of current intensity and frequency on the electromagnetic field and flow field were considered. Simulation results indicate that the electromagnetic force (EMF) along the mold width direction presents the centre-symmetric double-peak parabola distribution. The EMLS system leads to the flow velocity of molten steel decreases, especially near the free surface. Both the EMF increases with the current intensity and frequency (in the range of optimum frequency value), so the flow velocity of molten steel in the mold decreases obviously. As the current intensity increases from 800 A to 1000 A, the maximum free surface velocity decreases from 0.515 m/s without magnetic field to 0.155 m/s and 0.12 m/s, respectively. While the current frequency increases from 2 Hz to 6 Hz, the maximum surface velocity decreases from 0.177 m/s to 0.101m/s. The molten steel flow in mold is influenced obviously by the current intensity and frequency.
WANG Hong��dan;ZHU Miao yong;YU Hai��qi. Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold WithTraveling Magnetic Field[J]. �й������ڿ���, 2010, 17(9): 25-25.
WANG Hong��dan;ZHU Miao yong;YU Hai��qi. Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold WithTraveling Magnetic Field. Chinese Journal of Iron and Steel, 2010, 17(9): 25-25.
2010, Vol. 17 
