Real Heat Flux Analysis of Continuously Casting Round Billet
ZHAN Hui��ying,WANG Xu��dong,GUO Liang��liang,YAO Man
School of Material Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
Real Heat Flux Analysis of Continuously Casting Round Billet
ZHAN Hui��ying,WANG Xu��dong,GUO Liang��liang,YAO Man
School of Material Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
ժҪ The distributions of heat flux along the height and the circumferential direction of round billet mould were measured continuously. The influence of casting speed, carbon content, powder, and pouring temperature on the average longitudinal and circumferential heat flux in the ��high heat flux region�� was discussed. The experimental and analytical results provide a basis for an intelligent mould with online detection of defects, adjustment of operational parameters, optimization of the monitoring system, and even prediction of abnormal heat transfer.
�ؼ��� ��
continuous casting ,
mould ,
heat flux ,
round billet
Abstract ��The distributions of heat flux along the height and the circumferential direction of round billet mould were measured continuously. The influence of casting speed, carbon content, powder, and pouring temperature on the average longitudinal and circumferential heat flux in the ��high heat flux region�� was discussed. The experimental and analytical results provide a basis for an intelligent mould with online detection of defects, adjustment of operational parameters, optimization of the monitoring system, and even prediction of abnormal heat transfer.
Key words ��
continuous casting
mould
heat flux
round billet
�ո�����: 1900-01-01
[1]
Zhong Zheng,*,Jian-yu Long,Xiao-qiang Gao. Production scheduling problems of steelmaking-continuous casting process in dynamic production environment [J]. �й������ڿ���, 2017, 24(6): 586-594.
[2]
Long Guo,Xing-zhong Zhang*,Chang-xi Feng. Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation [J]. �й������ڿ���, 2017, 24(6): 595-600.
[3]
Bang-fu Huang,,*,Nai-yuan Tian,Zhe Shi,,Zhi-wei Ma,. Steel ladle exchange models during steelmaking and continuous casting process [J]. �й������ڿ���, 2017, 24(6): 617-624.
[4]
Yu Xu,,En-gang Wang,,*,Zhuang Li,,An-yuan Deng,. Effects of vertical electromagnetic stirring on grain refinement and macrosegregation control of bearing steel billet in continuous casting [J]. �й������ڿ���, 2017, 24(5): 483-489.
[5]
Chao Zhou,,Xing-zhong Zhang,*,Fang Wang,Ping-fei Liu,Yi-ming Fang. Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors [J]. �й������ڿ���, 2017, 24(3): 251-257.
[6]
Yang Liu,Xin-hua Liu*,Hua-dong Fu,Min-xuan Lou,Jian-xin Xie. Effects of process parameters on surface quality, composition segregation, microstructure and properties of QSn6.5-0.1 alloy slabs fabricated by HCCM horizontal continuous casting [J]. �й������ڿ���, 2017, 24(3): 273-281.
[7]
Guo-hua ZHANG,Yu-lan ZHEN,Kuo-chih CHOU. Viscosity and Structure Changes of CaO-SiO2-Al2O3-CaF2 Melts with Substituting Al2O3 for SiO2 [J]. �й������ڿ���, 2016, 23(7): 633-637.
[8]
Tao SUN,,Feng YUE,,Hua- jie WU,,Chun GUO,,Ying LI,Zhong- cun MA. Solidification Structure of Continuous Casting Large Round Billets under Mold Electromagnetic Stirring [J]. �й������ڿ���, 2016, 23(4): 329-337.
[9]
Feng-ming DU,Xu-dong WANG,Yu LIU,Tian-yi LI,Man YAO. Analysis of Non-uniform Mechanical Behavior for a Continuous Casting Mold Based on Heat Flux from Inverse Problem [J]. �й������ڿ���, 2016, 23(2): 83-91.
[10]
Shu-guo ZHENG,Miao-yong ZHU,Ye-lian ZHOU,Wang SU. Flow Characteristics and Inclusion Removal in a Ten-strand Continuous Casting Tundish: Physical Modelling and Industrial Trials [J]. �й������ڿ���, 2016, 23(2): 92-97.
[11]
Lin-min LI, Zhong-qiu LIU, Bao-kuan LI. Modelling of Bubble Aggregation, Breakage and Transport in Slab Continuous Casting Mold [J]. �й������ڿ���, 2015, 22(Supplement 1): 30-35.
[12]
Chen-xi JI , Yang CUI, Zhi ZENG, Zhi-hong TIAN, Chang-liang ZHAO , Guo-sen ZHU. Continuous Casting of High-Al Steel in Shougang Jingtang Steel Works [J]. �й������ڿ���, 2015, 22(Supplement 1): 53-56.
[13]
An-gui HOU,, Qun-liang ZHANG , Guo-dong XU , Mao-fa JIANG. Study and Application of Advanced Secondary Control Model for Continuous Casting at Baosteel [J]. �й������ڿ���, 2015, 22(Supplement 1): 98-103.
[14]
Zhen LI, , Cheng-jun LIU , Qun SUN , Mao-fa JIANG. Effect of Deoxidation Process on Distribution Characteristics of Inclusions in Silicon Steel Slabs [J]. �й������ڿ���, 2015, 22(Supplement 1): 104-110.
[15]
Yong MA,Cheng PENG,Wei GUI,Fang-yin WANG. Transient Mould Friction Based on the Wavelet Theory [J]. �й������ڿ���, 2015, 22(9): 785-794.