ժҪ Based on the Miedema��s formation heat model for binary alloys and the Toop��s asymmetric model for ternary alloys, the formation heat, excess entropy, and activity coefficients of silicon ranging from 1 900 K to 4 100 K in the Fe��Si��C melt formed during the laser cladding high silicon coatings process were calculated. The results indicated that all values of ln��0Si, ��CSi, ��SiSi and ��CSi are negative in the temperature range and these values increase as the temperature increases. And all values of ��SiSi and ��Si��CSi are positive and these values decrease with increasing temperature. The iso��activity lines of silicon are distributed axisymmetrically to the incident laser beam in the melt pool vertical to the laser scanning direction. And the iso��activity lines of silicon in the front of the melt pool along the laser scanning direction are more intensive than those in the back of the melt pool. The activity of silicon on the bottom of the melt pool is lower than that in the effecting center of laser beam on the top surface of the melt pool and it may be the important reason for the formation of the silicides and excellent metallurgical bonding between the laser cladding coating and the substrate.
Abstract��Based on the Miedema��s formation heat model for binary alloys and the Toop��s asymmetric model for ternary alloys, the formation heat, excess entropy, and activity coefficients of silicon ranging from 1 900 K to 4 100 K in the Fe��Si��C melt formed during the laser cladding high silicon coatings process were calculated. The results indicated that all values of ln��0Si, ��CSi, ��SiSi and ��CSi are negative in the temperature range and these values increase as the temperature increases. And all values of ��SiSi and ��Si��CSi are positive and these values decrease with increasing temperature. The iso��activity lines of silicon are distributed axisymmetrically to the incident laser beam in the melt pool vertical to the laser scanning direction. And the iso��activity lines of silicon in the front of the melt pool along the laser scanning direction are more intensive than those in the back of the melt pool. The activity of silicon on the bottom of the melt pool is lower than that in the effecting center of laser beam on the top surface of the melt pool and it may be the important reason for the formation of the silicides and excellent metallurgical bonding between the laser cladding coating and the substrate.
DONG Dan��yang;LIU Chang��sheng;ZHANG Bin. Thermodynamic Calculations of Melt in Melt Pool During Laser Cladding High Silicon Coatings[J]. �й������ڿ���, 2008, 15(3): 5-0.
DONG Dan��yang;LIU Chang��sheng;ZHANG Bin. Thermodynamic Calculations of Melt in Melt Pool During Laser Cladding High Silicon Coatings. Chinese Journal of Iron and Steel, 2008, 15(3): 5-0.
2008, Vol. 15 
