1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,Beijing 100083, China 2. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
Thermogravimetric Analysis of Coal Char Combustion Kinetics
1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,Beijing 100083, China 2. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
ժҪ Four chars prepared from pulverized coals were subjected to non-isothermal and isothermal combustion tests in a thermogravimetric analysis (TGA) device. Three different test methods, i.e., non-isothermal single heating rate (A), non-isothermal multiple heating rate (B), and isothermal test (C), were conducted to calculate the kinetic parameters of combustion of coal char. The results show that the combustion characteristics of bituminous coal char is better than that of anthracite char, and both increase of heating rate and increase of combustion temperature can obviously improve combustion characteristics of coal char. Activation energies of coal char combustion calculated by different methods are different, with activation energies calculated by methods A, B and C in the range of 103.12-153.77, 93.87-119.26, and 46.48-76.68 kJ/mol, respectively. By using different methods, activation energy of anthracite char is always higher than that of bituminous coal char. In non-isothermal tests, with increase of combustion temperature, the combustion process changed from kinetic control to diffusion control. For isothermal combustion, the combustion process was kinetically controlled at temperature lower than 580 �� for bituminous coal char and at temperature lower than 630 �� for anthracite char.
Abstract��Four chars prepared from pulverized coals were subjected to non-isothermal and isothermal combustion tests in a thermogravimetric analysis (TGA) device. Three different test methods, i.e., non-isothermal single heating rate (A), non-isothermal multiple heating rate (B), and isothermal test (C), were conducted to calculate the kinetic parameters of combustion of coal char. The results show that the combustion characteristics of bituminous coal char is better than that of anthracite char, and both increase of heating rate and increase of combustion temperature can obviously improve combustion characteristics of coal char. Activation energies of coal char combustion calculated by different methods are different, with activation energies calculated by methods A, B and C in the range of 103.12-153.77, 93.87-119.26, and 46.48-76.68 kJ/mol, respectively. By using different methods, activation energy of anthracite char is always higher than that of bituminous coal char. In non-isothermal tests, with increase of combustion temperature, the combustion process changed from kinetic control to diffusion control. For isothermal combustion, the combustion process was kinetically controlled at temperature lower than 580 �� for bituminous coal char and at temperature lower than 630 �� for anthracite char.