1. Central Iron and Steel Research Institute, Beijing 100081, China 2. School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
Constitutive Modeling for Flow Behaviors of Superaustenitic Stainless Steel S32654 during Hot Deformation
1. Central Iron and Steel Research Institute, Beijing 100081, China 2. School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
ժҪ Hot deformation behavior of superaustenitic stainless steel S32654 was investigated with hot compression tests at temperatures of 950-1250 �� and strain rates of 0��001-10 s-1. Above 1150 ��, with strain rate lower than 0��1 s-1, the flow curves exhibit nearly steady-state behavior, while at higher strain rate, continuous flow softening occurs. To provide a precise prediction of flow behavior for the alloy, the constitutive modeling considering effect of strain was derived on the basis of the obtained experimental data and constitutive relationship which incorporated Arrhenius term and hyperbolic-sine type equation. The material constants ��, n, Q and lnA are found to be functions of the strain and can be fitted employing eighth-order polynomial. The developed constitutive model can be employed to describe the deformation behavior of superaustenitic stainless steel S32654.
Abstract��Hot deformation behavior of superaustenitic stainless steel S32654 was investigated with hot compression tests at temperatures of 950-1250 �� and strain rates of 0��001-10 s-1. Above 1150 ��, with strain rate lower than 0��1 s-1, the flow curves exhibit nearly steady-state behavior, while at higher strain rate, continuous flow softening occurs. To provide a precise prediction of flow behavior for the alloy, the constitutive modeling considering effect of strain was derived on the basis of the obtained experimental data and constitutive relationship which incorporated Arrhenius term and hyperbolic-sine type equation. The material constants ��, n, Q and lnA are found to be functions of the strain and can be fitted employing eighth-order polynomial. The developed constitutive model can be employed to describe the deformation behavior of superaustenitic stainless steel S32654.
En-xiang PU,,Han FENG,Min LIU,Wen-jie ZHENG,Han DONG,Zhi-gang SONG. Constitutive Modeling for Flow Behaviors of Superaustenitic Stainless Steel S32654 during Hot Deformation[J]. �й������ڿ���, 2016, 23(2): 178-184.
En-xiang PU,,Han FENG,Min LIU,Wen-jie ZHENG,Han DONG,Zhi-gang SONG. Constitutive Modeling for Flow Behaviors of Superaustenitic Stainless Steel S32654 during Hot Deformation. Chinese Journal of Iron and Steel, 2016, 23(2): 178-184.