ժҪ The effect of adding 0��5 mass% Cu on ductility and magnetic properties of Fe-6��5Si (mass%) alloy was investigated. The alloys with and without 0��5 mass% Cu addition were warm rolled into thin sheets of thickness no more than 0��3 mm at temperature below 600 ��. It was found that the alloy with 0��5 mass% Cu addition was more easily warm rolled than Cu-free alloy. Tensile tests were carried out to further investigate this phenomenon, which confirmed that the ductility of the alloy with 0��5 mass% Cu addition was significantly higher than that of Cu-free alloy at 550 ��. Based on the results of transmission electron microscopy analysis, the ductility increase of the alloy with 0��5 mass% Cu addition was attributed to the effect of Cu on the promotion of dynamic recovery and suppression of long-range order in the alloy during warm rolling process. It was also observed that the iron loss was lower and inductance was higher for the alloy with 0��5 mass% Cu addition. Thus, it can be concluded that adding a suitably small amount of Cu would not only increase the ductility of Fe-6��5Si alloy at warm rolling temperatures but also improve its magnetic properties.
Abstract��The effect of adding 0��5 mass% Cu on ductility and magnetic properties of Fe-6��5Si (mass%) alloy was investigated. The alloys with and without 0��5 mass% Cu addition were warm rolled into thin sheets of thickness no more than 0��3 mm at temperature below 600 ��. It was found that the alloy with 0��5 mass% Cu addition was more easily warm rolled than Cu-free alloy. Tensile tests were carried out to further investigate this phenomenon, which confirmed that the ductility of the alloy with 0��5 mass% Cu addition was significantly higher than that of Cu-free alloy at 550 ��. Based on the results of transmission electron microscopy analysis, the ductility increase of the alloy with 0��5 mass% Cu addition was attributed to the effect of Cu on the promotion of dynamic recovery and suppression of long-range order in the alloy during warm rolling process. It was also observed that the iron loss was lower and inductance was higher for the alloy with 0��5 mass% Cu addition. Thus, it can be concluded that adding a suitably small amount of Cu would not only increase the ductility of Fe-6��5Si alloy at warm rolling temperatures but also improve its magnetic properties.
��������:the National Basic Research Program (863 Program) of China;the Provincial Natural Science Foundation of Hubei, China
ͨѶ����:
����
E-mail: wkdliu@126.com
����:
Zhao-yang CHENG,Jing LIU,Wen-si CHEN,Jia-chen ZHU,Xi-feng LIN,Zhi-dong XIANG. Effect of 0��5 mass% Cu Addition on Ductility and Magnetic Properties of Fe-6��5Si Alloy[J]. �й������ڿ���, 2016, 23(7): 717-721.
Zhao-yang CHENG,Jing LIU,Wen-si CHEN,Jia-chen ZHU,Xi-feng LIN,Zhi-dong XIANG. Effect of 0��5 mass% Cu Addition on Ductility and Magnetic Properties of Fe-6��5Si Alloy. Chinese Journal of Iron and Steel, 2016, 23(7): 717-721.