1. College of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, Hubei,China 2. Research Institute of Science and Technology, Northeastern University, Shenyang 110819, Liaoning, China
Friction Estimation and Roll Force Prediction during Hot Strip Rolling
1. College of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, Hubei,China 2. Research Institute of Science and Technology, Northeastern University, Shenyang 110819, Liaoning, China
ժҪ A mathematical model of friction coefficient was proposed for the roll force calculation of hot-rolled strips. The online numerical solving method of the roll force calculation formula based on the proposed friction model was developed and illustrated by the practical calculation case. Then, the friction coefficient during hot strip rolling was estimated from the measured roll force by force model inversion. And then, the expression of friction model was proposed by analyzing the calculation process of stress state coefficient, and the model parameters were determined by the shared parameter multi-model nonlinear optimization method. Finally, the industrial experiments demonstrated the feasibility and effectiveness of the related models. The accuracy of the new roll force model based on the built friction model was much higher than that of the traditional Sims model, and it could be applied in the online hot rolling process control.
Abstract��A mathematical model of friction coefficient was proposed for the roll force calculation of hot-rolled strips. The online numerical solving method of the roll force calculation formula based on the proposed friction model was developed and illustrated by the practical calculation case. Then, the friction coefficient during hot strip rolling was estimated from the measured roll force by force model inversion. And then, the expression of friction model was proposed by analyzing the calculation process of stress state coefficient, and the model parameters were determined by the shared parameter multi-model nonlinear optimization method. Finally, the industrial experiments demonstrated the feasibility and effectiveness of the related models. The accuracy of the new roll force model based on the built friction model was much higher than that of the traditional Sims model, and it could be applied in the online hot rolling process control.
��������:National Nature Science Foundation of China
ͨѶ����:
����
E-mail: liweigang.luck@foxmail.com
����:
Wei-gang LI,Chao LIU,Ning FENG,Xi CHEN,Xiang-hua LIU. Friction Estimation and Roll Force Prediction during Hot Strip Rolling[J]. �й������ڿ���, 2016, 23(12): 1268-1276.
Wei-gang LI,Chao LIU,Ning FENG,Xi CHEN,Xiang-hua LIU. Friction Estimation and Roll Force Prediction during Hot Strip Rolling. Chinese Journal of Iron and Steel, 2016, 23(12): 1268-1276.
2016, Vol. 23 
