Simulation study on heat-affected zone of high-strain X80 pipeline steel
Ying Ci1,*,Zhan-zhan Zhang2
1 College of Information Science and Engineering, Northeastern University, Shenyang 110004, Liaoning, China 2 School of Physical Science and Engineering, Zhengzhou University, Zhengzhou 450052, Henan, China
Simulation study on heat-affected zone of high-strain X80 pipeline steel
Ying Ci1,*,Zhan-zhan Zhang2
1 College of Information Science and Engineering, Northeastern University, Shenyang 110004, Liaoning, China 2 School of Physical Science and Engineering, Zhengzhou University, Zhengzhou 450052, Henan, China
ժҪ The microstructure evolution and impact-toughness variation of heat-affected zone (HAZ) in X80 high-strain pipeline steel were investigated via a welding thermal-simulation technique, Charpy impact tests, and scanning electron microscopy observations under different welding heat inputs and peak temperatures. The results indicate that when heat input was between 17 and 25 kJ��cm-1, the coarse-grained heat-affected zone showed improved impact toughness. When the heat input was increased further, the martensite-austenite (M-A) islands transformed from fine lath into a massive block. Therefore, impact toughness was substantially reduced. When the heat input was 20 kJ��cm-1 and the peak temperature of the first thermal cycle was between 900 and 1300��C, a higher impact toughness was obtained. When heat input was 20 kJ��cm-1 and the peak temperature of the first thermal cycle was 1300��C, the impact toughness value at the second peak temperature of 900��C was higher than that at the second peak temperature of 800 ��C because of grain refining and uniformly dispersed M-A constituents in the matrix of bainite.
Abstract��The microstructure evolution and impact-toughness variation of heat-affected zone (HAZ) in X80 high-strain pipeline steel were investigated via a welding thermal-simulation technique, Charpy impact tests, and scanning electron microscopy observations under different welding heat inputs and peak temperatures. The results indicate that when heat input was between 17 and 25 kJ��cm-1, the coarse-grained heat-affected zone showed improved impact toughness. When the heat input was increased further, the martensite-austenite (M-A) islands transformed from fine lath into a massive block. Therefore, impact toughness was substantially reduced. When the heat input was 20 kJ��cm-1 and the peak temperature of the first thermal cycle was between 900 and 1300��C, a higher impact toughness was obtained. When heat input was 20 kJ��cm-1 and the peak temperature of the first thermal cycle was 1300��C, the impact toughness value at the second peak temperature of 900��C was higher than that at the second peak temperature of 800 ��C because of grain refining and uniformly dispersed M-A constituents in the matrix of bainite.
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel[J]. �й������ڿ���, 2017, 24(9): 966-973.
Ying Ci,*,Zhan-zhan Zhang. Simulation study on heat-affected zone of high-strain X80 pipeline steel. Chinese Journal of Iron and Steel, 2017, 24(9): 966-973.
2017, Vol. 24 
