Prediction of plane-strain specimen geometry to efficiently obtain a forming limit diagram by Marciniak test
Qing-bao Yang1 Jun-ying Min1 John E. Carsley2 Yuan-yuan Wen1 Bernd Kuhlenko��tter3 Thomas B. Stoughton2 Jian-ping Lin1
1 School of Mechanical Engineering, Tongji University, Shanghai 201804, China 2 General Motors Research & Development, Warren, MI 48095-9055, USA 3 Chair of Production Systems, Ruhr-University Bochum, Bochum 44780, Germany
Prediction of plane-strain specimen geometry to efficiently obtain a forming limit diagram by Marciniak test
Qing-bao Yang1 Jun-ying Min1 John E. Carsley2 Yuan-yuan Wen1 Bernd Kuhlenko��tter3 Thomas B. Stoughton2 Jian-ping Lin1
1 School of Mechanical Engineering, Tongji University, Shanghai 201804, China 2 General Motors Research & Development, Warren, MI 48095-9055, USA 3 Chair of Production Systems, Ruhr-University Bochum, Bochum 44780, Germany
ժҪ Plane-strain forming limit strain (also known as FLD0) is an important data point on a forming limit diagram (FLD). The effects of friction coefficients and material parameters on the specimen width associated with the FLD0 (WFLD0) in Marciniak test were studied by finite element simulation. WFLD0 was expressed as a function of the Lankford coefficients, n-value, k-value and sheet thickness and validated with various sheet materials. The determination of WFLD0 is of significance not only to reduce iterative attempts to accurately obtain FLD0, but also to obtain a full valid FLD with the least number of test specimens, which largely increases the efficiency and reduces cost to experimentally measure valid FLDs.
Abstract��Plane-strain forming limit strain (also known as FLD0) is an important data point on a forming limit diagram (FLD). The effects of friction coefficients and material parameters on the specimen width associated with the FLD0 (WFLD0) in Marciniak test were studied by finite element simulation. WFLD0 was expressed as a function of the Lankford coefficients, n-value, k-value and sheet thickness and validated with various sheet materials. The determination of WFLD0 is of significance not only to reduce iterative attempts to accurately obtain FLD0, but also to obtain a full valid FLD with the least number of test specimens, which largely increases the efficiency and reduces cost to experimentally measure valid FLDs.
Qing-bao Yang Jun-ying Min John E. Carsley Yuan-yuan Wen Bernd Kuhlenko��tter Thomas B. Stoughton Jian-ping Lin. Prediction of plane-strain specimen geometry to efficiently obtain a forming limit diagram by Marciniak test[J].Journal of Iron and Steel Research International, 2018, 25(5): 539-545.
Qing-bao Yang Jun-ying Min John E. Carsley Yuan-yuan Wen Bernd Kuhlenko��tter Thomas B. Stoughton Jian-ping Lin. Prediction of plane-strain specimen geometry to efficiently obtain a forming limit diagram by Marciniak test. , 2018, 25(5): 539-545.
Nakazima K, Kikuma T, Hasuka K, 1968. Study on the formability of steel sheets Yawata Technical Report. 264: 8517-8530.
[2]
Marciniak Z, Kuczynski K, 1967. Limit Strains in the Processes of Stretch-Forming Sheet Metal. International Journal of Mechanical Science. 9: 609-620.
[3]
Banabic D, Lazarescu L, Paraianu L, Ciobanu I, Nicodim I, Comsa DS (2013) Development of a new procedure for the experimental determination of the Forming Limit Curves. CIRP Annals - Manufacturing Technology. 62: 255-258.
[4]
M. Aghaie-Khafri, R. Mahmudi. Predicting of plastic instability and forming limit diagrams. International Journal of Mechanical Sciences. 46 (2004) 1289-1306.
[5]
Bhargava M, Tewari A, Mishra SK (2015) Forming limit diagram of Advanced High Strength Steels (AHSS) based on strain-path diagram. Materials & Design. 85: 149-155
[6]
Panich S, Barlat F, Uthaisangsuk V, Suranuntchai S, Jirathearanat S (2013) Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels. Materials & Design 51: 756-766.
[7]
Min JY, Lin JP, Li JY, Bao WH (2010) Investigation on hot forming limits of high strength steel 22MnB5. Computational Materials Science. 49: 326-332.
[8]
Leppin C, Li J, Daniel D (2008) Application of a Method to Correct the Effect of Non-Proportional Strain Paths on Nakajima Test Based Forming Limit Curves. Numisheet 2008, 217-221.
[9]
Min JY, Stoughton TB, Carsley JE, Lin JP (2016) Compensation for process-dependent effects in the determination of localized necking limits. International Journal of Mechanical Sciences. 117: 115-134.
Karadogan C, Tamer ME (2015) Development of a new and simplified procedure for the experimental determination of forming limit curves. CIRP Annals - Manufacturing Technology. 64: 265-268.
[12]
Atal AS, Shete MT (2012) Formability analysis of deep drawing process by finite element simulation. International Journal of Science and Research. 3:2153-2156.
[13]
Hol J, Cid Alfaro MV, de Rooijc MB, Meinders T (2012) Advanced friction modeling for sheet metal forming. Wear. 286-287: 66-78.