Determination of liquidus temperatures in high-alloyed Fe�CC�CMn�CSi�CAl steels using differential thermal analysis
Chang-ling Zhuang1 Jian-hua Liu2
1 College of Materials and Metallurgy, Guizhou University, Guiyang 550025, Guizhou, China 2 Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, China
Determination of liquidus temperatures in high-alloyed Fe�CC�CMn�CSi�CAl steels using differential thermal analysis
Chang-ling Zhuang1 Jian-hua Liu2
1 College of Materials and Metallurgy, Guizhou University, Guiyang 550025, Guizhou, China 2 Engineering Research Institute, University of Science and Technology Beijing, Beijing 100083, China
ժҪ The liquidus temperature of the Fe�CC�CMn�CSi�CAl alloy was investigated by using an improved differential thermal analysis method, which effectively tackles down the manganese evaporation in the course of differential thermal analysis experiments for high-manganese twinning-induced plasticity (TWIP) steels at high temperature. It was found that the liquidus temperature is more strongly dependent on the silicon content than expected. By considering the high manganese content in the Fe�CC�CMn�CSi�CAl TWIP steels, the effect of carbon content on the depression coefficient of manganese should not be ignored, which has considerable impact on the liquidus temperature. An equation was summarized to effectively predict the liquidus temperature for a wide range of high-manganese steels. Meanwhile, the prediction results of the equation are consistent with the experimental results, as well as those results acquired from ThermoCalc.
Abstract��The liquidus temperature of the Fe�CC�CMn�CSi�CAl alloy was investigated by using an improved differential thermal analysis method, which effectively tackles down the manganese evaporation in the course of differential thermal analysis experiments for high-manganese twinning-induced plasticity (TWIP) steels at high temperature. It was found that the liquidus temperature is more strongly dependent on the silicon content than expected. By considering the high manganese content in the Fe�CC�CMn�CSi�CAl TWIP steels, the effect of carbon content on the depression coefficient of manganese should not be ignored, which has considerable impact on the liquidus temperature. An equation was summarized to effectively predict the liquidus temperature for a wide range of high-manganese steels. Meanwhile, the prediction results of the equation are consistent with the experimental results, as well as those results acquired from ThermoCalc.
Chang-ling Zhuang Jian-hua Liu. Determination of liquidus temperatures in high-alloyed Fe�CC�CMn�CSi�CAl steels using differential thermal analysis[J].Journal of Iron and Steel Research International, 2018, 25(5): 546-553.
Chang-ling Zhuang Jian-hua Liu. Determination of liquidus temperatures in high-alloyed Fe�CC�CMn�CSi�CAl steels using differential thermal analysis. , 2018, 25(5): 546-553.
FROMMEYER G, BR��X U, NEUMANN P.Supra-Ductile and High-Strength Manganese-TRIPTWIP Steels for High Energy Absorption Purposes[J].ISIJ International, 2003, 43(3):438-446
[2]
Li K, Zhuang C, Liu J, Shen S, Ji Y, Han Z.Smelting and Casting Technologies of Fe-25Mn-3Al-3Si Twinning Induced Plasticity Steel for Automobiles[J].Journal of Iron and Steel Research, International, 2015, 22(S1):75-79
[3]
Yang J, Wang Y, Ruan X, Wang R, Zhu K, Fan Z, Wang Y, Li C, Jiang X.Effects of Manganese Content on Solidification Structures,Thermal Properties,and Phase Transformation Characteristics in Fe-Mn-C Steels[J].Metallurgical and Materials Transactions B, 2015, 46(3):1353-1364
[4]
Xin X L, Yang J, Wang Y N, Wang R Z, Wang W L, Zheng H G, Hu H T.Effects of Al content on non-metallic inclusion evolution in Fe�C16Mn�CxAl�C06C high Mn TWIP steel[J].Ironmaking and Steelmaking, 2016, 43(3):234-242
[5]
Zhuang C, Liu J, Mi Z, Jiang H, Tang D, Wang G.Non-Metallic Inclusions in TWIP Steel[J].steel research international, 2014, 85(10):1432-1439
[6]
Gr?ssel O, Kr��ger L, Frommeyer G, Meyer L W.High strength Fe�CMn�C(Al, Si) TRIP/TWIP steels development properties application[J].International Journal of Plasticity, 2000, (16):1391-1409
[7]
Ding H, Ding H, Qiu C, Tang Z.Formability of TRIPTWIP Steel Containing Manganese of 188%[J].Journal of Iron and Steel Research, International, 2011, 18(1):36-40
[8]
Yang J, Wang Y, Ruan X, Wang R, Zhu K, Fan Z, Wang Y, Li C, Jiang X.Effects of Manganese Content on Solidification Structures,Thermal Properties,and Phase Transformation Characteristics in Fe-Mn-Al-C Steels[J].Metallurgical and Materials Transactions B, 2015, 46(3):1365-1375
[9]
Cho J, Yoo S, Park M, Park J, Moon K.Improvement of Castability and Surface Quality of Continuously Cast TWIP Slabs by Molten Mold Flux Feeding Technology[J].Metallurgical and Materials Transactions B, 2017, 48(1):187-196
[10]
Yang J, Wang Y, Ruan X, Wang R, Zhu K, Fan Z, Wang Y, Li C, Jiang X.Effects of Manganese Content on Solidification Structures,Thermal Properties,and Phase Transformation Characteristics in Fe-Mn-Al-C Steels[J].Metallurgical and Materials Transactions B, 2015, 46(3):1365-1375
[11]
Wang S H, Liu Z Y, Zhang W N, Wang G D, Liu J L, Liang G F.Microstructure and Mechanical Property of Strip in Fe�C23Mn�C3Si�C3Al TWIP Steel by Twin Roll Casting[J].ISIJ International, 2009, 49(9):1340-1346
[12]
Kang J, Ingendahl T, Bleck W.A constitutive model for the tensile behaviour of TWIP steels: Composition and temperature dependencies[J].Materials & Design, 2016, 90:340-349
[13]
Lan P, Tang H, Zhang J.Hot ductility of high alloy Fe�CMn�CC austenite TWIP steel[J].Materials Science and Engineering: A, 2016, 660:127-138
[14]
Salas-Reyes A E, Mej��a I, Bedolla-Jacuinde A, Boulaajaj A, Calvo J, Cabrera J M.Hot ductility behavior of high-Mn austenitic Fe�C22Mn�C1.5Al�C1.5Si�C0.45C TWIP steels microalloyed with Ti and V[J].Materials Science and Engineering: A, 2014, 611:77-89
[15]
Cai M, Ding H, Tang Z, Lee H, Lee Y.Strain Hardening Behavior of High Performance FBDP,TRIP and TWIP Steels[J].steel research international, 2011, 82(3):242-248
[16]
Li D, Wei Y, Liu C, Hou L.Hot Deformation Behaviors of Fe�C30Mn�C3Si�C3Al TWIP Steel during Compression at Elevated Temperature and Strain Rate[J].steel research international, 2013, 84(8):740-750
[17]
Banda W, Georgalli G A, Lang C, Eksteen J J.Liquidus temperature determination of the Fe�CCo�CCu system in the Fe-rich corner by thermal analysis[J].Journal of Alloys and Compounds, 2008, 461:178-182
[18]
Wu R I, Perepezko J H.Liquidus temperature determination in multicomponent alloys by thermal analysis[J].Metallurgical and Materials Transactions A, 2000, 31(2):497-501
[19]
Cieslak M J, Hills C R, Hlava P F, David S A.An investigation of the high-temperature and solidification microstructures of PH 13-8 Mo stainless steel[J].Metallurgical Transactions A, 1990, 21(9):2465-2475
[20]
Zhuang C, Liu J, Bernhard C, Presoly P.Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method[J].Journal of Iron and Steel Research, International, 2015, 22(8):709-714
[21]
Pollock T M, Murphy W H.The breakdown of single-crystal solidification in high refractory nickel-base alloys[J].Metallurgical and Materials Transactions A, 1996, 27(4):1081-1094
[22]
Cieslak M J, Headley T J, Knorovsky G A, Romig A D, Kollie T.A comparison of the solidification behavior of INCOLOY 909 and INCONEL 718[J].Metallurgical Transactions A, 1990, 21(1):479-488
[23]
Gryc K, Smetana B, ?aludov�� M, Michalek K.Determination of the solidus and liquidus temperatures of the real-steel grades with dynamic thermal-analysis methods[J].Materiali in Tehnologije, 2013, 47(5):569-575
[24]
Won Y, Thomas B.Simple model of microsegregation during solidification of steels[J].Metallurgical and Materials Transactions A, 2001, 32(7):1755-1767
[25]
Kawakami K, Kitagawa T, Murakami K.Fundamental research on solidification involved in continuous casting of steel[J].Nippon Kokan Technical Report, 1982, (36):26-41
[26]
Kagawa A, Okamoto T.Influence of alloying elements on temperature and composition for peritectic reaction in plain carbon steels[J].Materials Science and Technology, 1986, 2:997-1008