摘要 La0.8Pr0.2MgNi3.6Co0.4 alloys were prepared by induction melting, annealing and melt spinning techniques. The influences of annealing treatment and melt spinning on phase structure and hydrogen storage properties were systematically investigated. The results of X-ray diffraction determine that the as-cast and as-spun La0.8Pr0.2MgNi3.6Co0.4 alloys consist of LaMgNi4 and LaNi5 phases, while only LaMgNi4 phase is present in the as-annealed alloy. The scanning electron microscope images illustrate that the grain of the alloy is significantly refined by melt spinning technology. The gaseous hydrogen storage kinetic and thermodynamic properties were measured by using a Sievert’s apparatus at different temperatures. The maximum hydrogen storage capacity of the as-cast, as-spun and as-annealed La0.8Pr0.2MgNi3.6Co0.4 alloy is 1.699, 1.637 and 1.535 wt.% at 373 K and 3 MPa, respectively. The annealed alloy has flatter and wider pressure plateaus compared with the as-cast and as-spun alloys, which correspond to the hydrogen absorption and desorption process of LaMgNi4 and corresponding hydride. Furthermore, the enthalpy and entropy changes of LaMgNi4 during hydrogenation at different temperatures were calculated using Van’t Hoff methods.
Abstract：La0.8Pr0.2MgNi3.6Co0.4 alloys were prepared by induction melting, annealing and melt spinning techniques. The influences of annealing treatment and melt spinning on phase structure and hydrogen storage properties were systematically investigated. The results of X-ray diffraction determine that the as-cast and as-spun La0.8Pr0.2MgNi3.6Co0.4 alloys consist of LaMgNi4 and LaNi5 phases, while only LaMgNi4 phase is present in the as-annealed alloy. The scanning electron microscope images illustrate that the grain of the alloy is significantly refined by melt spinning technology. The gaseous hydrogen storage kinetic and thermodynamic properties were measured by using a Sievert’s apparatus at different temperatures. The maximum hydrogen storage capacity of the as-cast, as-spun and as-annealed La0.8Pr0.2MgNi3.6Co0.4 alloy is 1.699, 1.637 and 1.535 wt.% at 373 K and 3 MPa, respectively. The annealed alloy has flatter and wider pressure plateaus compared with the as-cast and as-spun alloys, which correspond to the hydrogen absorption and desorption process of LaMgNi4 and corresponding hydride. Furthermore, the enthalpy and entropy changes of LaMgNi4 during hydrogenation at different temperatures were calculated using Van’t Hoff methods.
Ting-ting Zhai,Ze-ming Yuan,Feng Hu, et al. Influence of melt spinning and annealing treatment on structures and hydrogen storage thermodynamic properties of La0.8Pr0.2MgNi3.6Co0.4 alloy[J]. Journal of Iron and Steel Research International, 2020, 27(1): 114-120.
2020, Vol. 27 
