摘要 Least squares support vector machine (LS-SVM) plays an important role in steel surface defects classification because of its high speed. However, the defect samples obtained from the real production line may be noise. LS-SVM suffers from the poor classification performance in the classification stage when there are noise samples. Thus, in the classification stage, it is necessary to design an effective algorithm to process the defects dataset obtained from the real production line. To this end, an adaptive weight function was employed to reduce the adverse effect of noise samples. Moreover, although LSSVM offers fast speed, it still suffers from a high computational complexity if the number of training samples is large. The time for steel surface defects classification should be as short as possible. Therefore, a sparse strategy was adopted to prune the training samples. Finally, since the steel surface defects classification belongs to unbalanced data classification, LSSVM algorithm is not applicable. Hence, the unbalanced data information was introduced to improve the classification performance. Comprehensively considering above-mentioned factors, an improved LS-SVM classification model was proposed, termed as ILS-SVM. Experimental results show that the new algorithm has the advantages of high speed and great anti-noise ability.
Abstract：Least squares support vector machine (LS-SVM) plays an important role in steel surface defects classification because of its high speed. However, the defect samples obtained from the real production line may be noise. LS-SVM suffers from the poor classification performance in the classification stage when there are noise samples. Thus, in the classification stage, it is necessary to design an effective algorithm to process the defects dataset obtained from the real production line. To this end, an adaptive weight function was employed to reduce the adverse effect of noise samples. Moreover, although LSSVM offers fast speed, it still suffers from a high computational complexity if the number of training samples is large. The time for steel surface defects classification should be as short as possible. Therefore, a sparse strategy was adopted to prune the training samples. Finally, since the steel surface defects classification belongs to unbalanced data classification, LSSVM algorithm is not applicable. Hence, the unbalanced data information was introduced to improve the classification performance. Comprehensively considering above-mentioned factors, an improved LS-SVM classification model was proposed, termed as ILS-SVM. Experimental results show that the new algorithm has the advantages of high speed and great anti-noise ability.
Li-ming Liu,Mao-xiang Chu,Rong-fen Gong, et al. Unbalanced classification method using least squares support vector machine with sparse strategy for steel surface defects with label noise[J]. Journal of Iron and Steel Research International, 2020, 27(12): 1407-1419.
2020, Vol. 27 
