|
|
|
| Kinetic model of chromium release from argon oxygen decarburisation (AOD) slag in a neutral leachate |
| Ya-nan Zeng1, Qian-qian Ren1, Bao Liu1, Jun-guo Li1 |
| 1 School of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063200, Hebei, China |
|
|
|
|
Abstract Valorisation of argon oxygen decarburisation (AOD) slag, a suitable recycling resource, is limited by the release of a notable amount of heavy metals, such as chromium. The mineralogical component of AOD slag was characterised by X-ray diffraction and scanning electron microscopy-energy-dispersive X-ray spectrometry. To explore the release kinetics of chromium from AOD slag, neutral leaching tests were performed at various temperatures. The results indicated the existence of two leaching stages: quick and slow leaching stages. In 2 h, the chromium release fraction increased sharply as the leaching time increased. As the leaching time increased, the chromium release rate gradually decreased. Based on the shrinking core model, chromium release kinetic models for the quick and slow leaching stages from the AOD slag were independently determined. The chromium release was controlled by solid product diffusion during the quick leaching stage and a complicated process in the slow leaching stage. The activation energy of chromium leaching was calculated based on the Arrhenius equation. Solid product diffusion was the velocity-determining step during the 2 h leaching process. In the slow leaching stage, chromium release was controlled by complicated hybrid control dominated by solid product diffusion.
|
|
Received: 13 March 2020
Published: 25 November 2020
|
|
|
|
| Cite this article: |
|
Ya-nan Zeng,Qian-qian Ren,Bao Liu, et al. Kinetic model of chromium release from argon oxygen decarburisation (AOD) slag in a neutral leachate[J]. Journal of Iron and Steel Research International, 2020, 27(11): 1303-1310.
|
|
|
|
| [1] |
Jian-ming Su, Zhi-he Dou, Ting-an Zhang, Yan Liu. Kinetics of hot metal desulfurization by bottom blowing magnesium vapor[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(4): 392-401. |
| [2] |
Ying Ren · Li-feng Zhang · Ying Zhang. Modeling reoxidation behavior of Al–Ti-containing steels by CaO–Al 2O3–MgO–SiO 2 slag[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2018, 25(2): 146-156. |
| [3] |
Yong Yang ? Tian-rui Li ? Tao Jia ? Zhao-dong Wang. Precipitation kinetics of complex precipitate in multicomponent systems[J]. , 2018, 25(10): 1086-1093. |
| [4] |
Tao Xu,Guang-wei Wang,*,Jian-liang Zhang,Teng-fei Song,Run-sheng Xu. Non-isothermal study of gasification process of coal char and biomass char in CO2 condition[J]. Chinese Journal of Iron and Steel, 2017, 24(10): 985-990. |
| [5] |
Jiu-gang SHAO,Jian-liang ZHANG,Guang-wei WANG,Zhe WANG,Hong-wei GUO. Combustion Property and Kinetic Modeling of Pulverized Coal Based on Non-isothermal Thermogravimetric Analysis[J]. Chinese Journal of Iron and Steel, 2014, 21(11): 1002-1008. |
| [6] |
Dan ZHANG,Ya-zheng LIU,Le-yu ZHOU,Qiang HAN,Bo JIANG,Zhong-zhi LI. Dynamic Recrystallization Behavior of GCr15SiMn Bearing Steel during Hot Deformation[J]. Chinese Journal of Iron and Steel, 2014, 21(11): 1042-1048. |
|
|
|
|
2020, Vol. 27 
