|
|
|
| Mathematical model of burden distribution in bell-less top blast furnace |
| Jian-sheng Chen1, Hai-bin Zuo1, Jing-xiu Wang1, Qing-guo Xue1, Jing-song Wang1 |
| 1 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract The burden distribution in the shaft of blast furnace is known to affect the gas distribution, heat transfer, and chemical reactions inside the furnace. However, the internal layer structure of burden in the shaft cannot be directly measured. Hence, a mathematical model for evaluating burden profile and layer structure was established. A sensitivity analysis based on the model was implemented to elucidate the effect of some factors on the burden distribution, including the stockline height and the mass of central coke. The results show that the width of funnel zone widens with the increase in stockline height, and the mass percentage of ore to coke in this zone slightly increases. Besides, the mass of central coke shows a significant influence on the width of coke channel, and 2% of batch mass of coke is recommended to implement central coke charging operation. The model has been indirectly verified by the gas temperature in operating blast furnace and successfully applied to online evaluate burden distribution.
|
|
|
|
|
|
| Cite this article: |
|
Jian-sheng Chen,Hai-bin Zuo,Jing-xiu Wang, et al. Mathematical model of burden distribution in bell-less top blast furnace[J]. Journal of Iron and Steel Research International, 2023, 30(02): 216-226.
|
|
|
|
| [1] |
He-bin Jin, Xue-you Wang, Yun-bo Wang, Shi-song Wang, Xu-bin Zhang, Sheng-ping He. Variation of meniscus shape and initial steel solidification under different steel–slag interfacial tension in continuous casting mold of slab[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(03): 465-474. |
| [2] |
Jiang-yong He, Chong Zou, Jun-xue Zhao, Dong Liang, Jia-le Xi, Cheng Ma. Comparison of semi-coke with traditional pulverized coal injection and iron ore sintering fuels based on chemical structure and combustion behavior[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 725-740. |
| [3] |
Hong-tao Wang, Man-sheng Chu, Ji-wei Bao, Zheng-gen Liu, Hong-ming Long. Non-isothermal reduction process analysis of iron-bearing burden with charging iron coke hot briquette under simulated blast furnace conditions[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 741-750. |
| [4] |
Yi-bo Liu, Jian Yang, Chao Ma, Tao Zhang, Fu-bin Gao, Tai-quan Li, Jun-li Chen. Mathematical modeling of flow field in slab continuous casting mold considering mold powder and solidified shell with high temperature quantitative measurement[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(3): 445-461. |
| [5] |
Qing-yu Tang, Kai-jia Wu, Min Gan, Xiao-hui Fan, Zeng-qing Sun, Hao Lv, Guo-jing Wong. Developing laterite nickel ore leaching residue as sustainable blast furnace charge[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(11): 1760-1770. |
| [6] |
Wei-an Wang, Xiao-ming Li, Yun He, Hao-dong Xi, Jian-li Wang, Guo-xing Qiu. Effect of CaCO3 on volatilization of self-reduced zinc from blast furnace dust[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(09): 1404-1411. |
|
|
|
|
2023, Vol. 30 
