|
|
|
| Evolution of inclusion and microstructure in Ti–Zr deoxidized steel during hot compression |
| Yong-kun Yang1, Jia-yu Zhu1, Xiao-ming Li1, Yang Wang1, Cheng-jun Liu2,3, Dong-ping Zhan3 |
| 1 School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, Shaanxi, China 2 Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, Liaoning, China 3 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
|
|
Abstract The effects of different hot deformation amounts on the evolution of inclusion and microstructure in Ti–Zr deoxidized steel were studied by utilizing the Thermecmaster-Z hot simulation test machine, automatic scanning electron microscope equipped with energy-dispersive spectrometer, and electron backscattered diffraction. The results indicated that hot deformation amount has no significant effect on the number density of oxide, but the MnS that precipitated on the Ti–Zr oxide surface undergoes extension and breakage, resulting in the changes in oxide aspect ratio. Moreover, the fracture of nitride mainly occurs in the sample with the second pass deformation amount of 42.9% and 71.4%, and the degree of fragmentation of nitride is more serious with the deformation amount increasing. During the hot compression, sulfide undergoes breakage and extension, and with the second pass deformation amount increasing, the breakage and extension of sulfide present a periodic change. Finally, with the increase in hot compression amount, the ferrite types in microstructure change from acicular ferrite and bainitic ferrite to polygonal ferrite, and the ferrite grain size is refined. When the total deformation amount increases from 30% to 80%, the ferrite grain sizes of grain boundary with the misorientation of 4 and 15 decrease from 4.14 and 5.67 μm to 3.47 and 4.40 μm, respectively. However, when the total deformation amount increases to 80%, the harmful ferrite/pearlite banded structure appears in the microstructure. Refining ferrite grain size and avoiding harmful microstructure are the key for the optimization of hot compression process.
|
|
|
|
|
|
| Cite this article: |
|
Yong-kun Yang,Jia-yu Zhu,Xiao-ming Li, et al. Evolution of inclusion and microstructure in Ti–Zr deoxidized steel during hot compression[J]. Journal of Iron and Steel Research International, 2023, 30(10): 1987-1999.
|
|
|
|
| [1] |
Yan-xin Qiao, Zhi-bin Zheng, Hao-kun Yang, Jun Long, Pei-xian Han. Recent progress in microstructural evolution, mechanical and corrosion properties of medium-Mn steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1463-1476. |
| [2] |
Yong-kuan Zhou, Jia-jie Kang, Guo Jin, Xiu-fang Cui, Jie Zhang, Guo-zheng Ma, Zhi-qiang Fu, Li-na Zhu, Ding-shun She, Yu-yun Yang. Effect of vacuum heat treatment on microstructure and corrosion behavior of HVOF sprayed AlCoCrFeNiCu high entropy alloy coatings[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1550-1561. |
| [3] |
Yang Liu, Jian-hua Liu, Yang He. Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1244-1257. |
| [4] |
Sheng-hu Lu, Jian Pan, Si-wei Li, De-qing Zhu, Zheng-qi Guo, Yue Shi, Ben-jing Shi. Preparation of sinter with low reduction degradation index for COREX reduction in a high proportion[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 635-649. |
| [5] |
Yi-ling Jiang, Sha-sha Liu, Rong-gui Lu, Xu Cheng, Jia Li, Yang Chen, Gao-feng Tian. Cellular Automata Simulation of Grain Growth of Powder Metallurgy Ni-Based Superalloy[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 838-848. |
| [6] |
Chao Zhang, Zhi-ping Xiong, De-zhen Yang, Valeriy Dudko, Xing-wang Cheng. Chemical patterning enhanced by increasing quenching temperature in a medium-Mn steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(10): 1916-1920. |
|
|
|
|
2023, Vol. 30 
