|
|
Enhanced slag resistance and mechanical properties of magnesia castables with strontium carbonate addition |
Hao Liu1, Yu-xuan Zhu1, Zhou-fu Wang1, Yan Ma1, Xi-tang Wang1 |
1 The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China |
|
|
Abstract Magnesia castables have been widely used in metallurgical industries with the advantages of high refractoriness, nonpolluting steel, and resistance to alkaline slag. Magnesia castables were prepared using strontium carbonate (SrCO3) as additive to enhance slag resistance and mechanical properties, and the influence of SrCO3 on the evolution of phases, microstructure and properties of magnesia castables sintered at different temperatures was clarified. The results show that, with the introduction of SrCO3 (lower than 3 wt.%), elastic modulus, mechanical strength, thermal shock resistance and densification of magnesia castables were significantly enhanced owing to the formation of needle-like Ca0.9Sr0.1MgSi2O6 phase and liquid phase when sintering at high temperatures, and the introduced SrCO3 presented minor effects on the mechanical properties of castables for its highly structural stability below 1100 °C. During the slag corrosion process, SrCO3 and SiO2 in castables reacted with Al3+ in molten slag to form SrAl2SiO8 phase, resulting in the increased slag viscosity and suppressed continuing penetration.
|
|
|
|
|
Cite this article: |
Hao Liu,Yu-xuan Zhu,Zhou-fu Wang, et al. Enhanced slag resistance and mechanical properties of magnesia castables with strontium carbonate addition[J]. Journal of Iron and Steel Research International, 2023, 30(10): 2021-2030.
|
|
|
|
[1] |
Yan-xin Qiao, Zhi-bin Zheng, Hao-kun Yang, Jun Long, Pei-xian Han. Recent progress in microstructural evolution, mechanical and corrosion properties of medium-Mn steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1463-1476. |
[2] |
Yong-kuan Zhou, Jia-jie Kang, Guo Jin, Xiu-fang Cui, Jie Zhang, Guo-zheng Ma, Zhi-qiang Fu, Li-na Zhu, Ding-shun She, Yu-yun Yang. Effect of vacuum heat treatment on microstructure and corrosion behavior of HVOF sprayed AlCoCrFeNiCu high entropy alloy coatings[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1550-1561. |
[3] |
Jing-xiong Zhong, Li-ying Cao, Mei Li, Shu-ping Wang, Fang Liu, Xue-wei Lv, Xiao-qin Peng. Mechanical properties and durability of alkali-activated steel slag–blastfurnace slag cement[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(7): 1342-1355. |
[4] |
Yang Liu, Jian-hua Liu, Yang He. Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1244-1257. |
[5] |
Sheng-hu Lu, Jian Pan, Si-wei Li, De-qing Zhu, Zheng-qi Guo, Yue Shi, Ben-jing Shi. Preparation of sinter with low reduction degradation index for COREX reduction in a high proportion[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 635-649. |
[6] |
Yi-ling Jiang, Sha-sha Liu, Rong-gui Lu, Xu Cheng, Jia Li, Yang Chen, Gao-feng Tian. Cellular Automata Simulation of Grain Growth of Powder Metallurgy Ni-Based Superalloy[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 838-848. |
|
|
|
|