Abstract:?Low-carbon aluminum killed steel QD08 is mainly used in the manufacture of automobile engine claw, Ds inclusions exceed the standard, seriously affecting its fatigue life. The morphology, size and composition of inclusions were analyzed by Electron microscopy, SEM and EDS. It is suggested that the cleanliness of the molten steel can be improved and the inclusions in the molten steel can be reduced by the continuous casting slag. And by improving the production process, effective control of the large particles in the QD08 Ds kind inclusions, improve Ds inclusions to provide technical guidance for the scene.
张洪彪, 李 海, 鲁东生, 介瑞华. 低碳铝镇静钢QD08中Ds类夹杂物分析与控制[J]. , 2017, 36(5): 50-53.
ZHANG Hong-biao, LI Hai, LU Dong-sheng, JIE Rui-hua. Analysis and control of Ds inclusions in QD08 low carbon Al - killed steel. , 2017, 36(5): 50-53.
Yang Z G, Li S X, Zhang J M, et al. The fatigue behaviors of zero inclusion and commercial 42CrMo steels in the super-long fatigue life regime. Acta Mater, 2004, 52(18): 5235
[3]
Chapetti M D, Tagawa T, Miyata T. Ultra long cycle fatigue of High-strength carbon steels: PartⅠ. Review and analysis of the mechanism of failure. Mater Sci Eng A , 2003, 356(1-2): 227
[4]
Chapetti M D, Tagawa T, Miyata T. Ultra-long cycle fatigue of high-strength carbon steels: Part Ⅱ. Estimation of fatigue limit for failure from internal inclusions. Mater Sci Eng A, 2003,356(1-2): 236
[5]
Cogne J Y, Heritier B, Monnot J. Cleanness and fatigue life of bearing steel / /Proceedings of the Conference on Clean Steel 3.London: the Metals Society, 1986: 30
[6]
Ders J, Thivard B, Genta A. Improvement of steel wire for cold heading. Wire J Int, 1992, 10: 73
[7]
Duckworth W E, Ineson E. Clean Steel I. London: Iron and SteelInstitute, 1963: 87
XU Xiaohong,LIU Jigang,ZHOU Qun,et al. Study and application of harmless treatment of inclusions in special steel produced by Jiangyin Xingcheng Special Steel[C]/ / The 6th International Congress on the Science and Technology of Steelmaking,2015: 754-758.