|
|
Experimental research on the mechanical properties of gray cast iron used in paper drying cylinders |
LIU Kexiu,FENG Xiaoliang,LI Maodong,MA Kuo,LI Lushui |
Guangzhou Special Pressure Equipment Inspection and Research Institute, Guangzhou 510663, China |
|
|
Guide |
|
Abstract In order to make a more accurate judgment on the mechanical properties of the gray cast iron paper dryers that have been in service for a long time, different methods were used to conduct hardness tests and tensile tests on a 62-year continuous service dryer gray cast iron material, and the test results perform comparative analysis. The test results show that there is a large deviation between the test results of the D-type impact device Leeb hardness tester and the laboratory bench-top Brinell hardness tester. It is not suitable to use the D-type impact device Leeb hardness tester for the gray cast iron paper dryer on-site inspection. The test results of the G-type impact device Leeb hardness tester are relatively close to those of the laboratory bench-top Brinell hardness tester, and the deviations of the test results of different parts are also quite different. There is no difference between the hardness and strength of gray cast iron materials obvious linear correspondence, it is recommended to combine microstructure inspection and other methods to comprehensively judge the material performance status.
|
Received: 06 July 2021
|
|
|
|
|
[1] |
Hui Li, Li Feng, Hong Zhou, Peng Zhang, Ti Zhou, Qi Sui, Lu-quan Ren. Influence of varying forms of bionic units on repairing remaining quenching surface of gray cast iron[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(2): 201-210. |
[2] |
XIAO Shao-bin, WANG Wei, LIU Tian-yu, ZHANG Qin, LÜ Zhi-qing. Effects of vacancies and C atoms on mechanical properties of Fe grain boundary[J]. Iron and Steel, 2020, 55(4): 75-81. |
[3] |
CHENG Ya-nan,CHEN Bin,JIANG Jin,HOU Zong-bao,WANG Yan-yang,QIAN Wen. Analysis of abnormal fracture in tension of wire rod[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(2): 49-. |
[4] |
CAI Wei, JIN Liang, MAO Jun-chun, LIU Chang-wu, YAO Sai-feng, TAN Zhong. Impact of different temperatures of deformed steel bar on cooling bed on performance of microstructure[J]. Iron and Steel, 2020, 55(12): 92-98. |
[5] |
. Research on Microstructure and Properties of CMT Welding Joints of Austenitic Stainless Steel[J]. , 2019, 38(6): 0-0. |
[6] |
WANG Lin-feng1,2, ZHOU Li-chu1, CHEN Hua-qing2, HU Xian-jun3, . Manufacturing technology,microstructural and mechanical properties of ?5.35 mm-2 100 MPa grade hot galvalume steel wire for bridge cable[J]. Iron and Steel, 2019, 54(2): 90-96. |
|
|
|
|