|
|
EBSD sample preparation and characterization method of oxide scale on the surface of hot-rolled steel strip |
ZHANG Qi1, MI Zhenli1, ZHU Rong1, WANG Mai1, WU Yanxin1, LI Lei2 |
1. Institute of Engineering Technology, University of Science and Technology Beijing, Beijing 100083, China; 2. Technical Center, Hunan Valin Lianyuan lron and Steel Co., Ltd., Loudi 417009, China |
|
|
Abstract In order to obtain an EBSD sample preparation method suitable for oxide scale on the surface of hot-rolled steel strips, the oxide scale generated on the surface of 22MnB5 hot-rolled sheet was selected as the research object. The surface EBSD scanning effects of hot-rolled sheet strip under three sample fixture methods (i.e., cold mounting, hot mounting and clamp clamping) and two sample preparation methods (i.e., vibration polishing and manual sample preparation) were compared. The results showed that the hot mounting method was the most suitable fixing method for polishing the surface of hot-rolled strip steel with oxide scale. Both vibration polishing and manual sample preparation methods could characterize the microstructures (such as morphology, phase composition and grain size) of oxide scale on the surface of hot-rolled steel strip. The manual sample preparation method proposed could shorten the sample preparation time and cost while ensuring the sample preparation effect.
|
Received: 22 February 2022
|
|
|
|
[1] |
李延林. EBSD技术在材料科学中的应用[J]. 黑龙江科技信息,2016(21):57.
|
[2] |
詹美燕, 李春明. 电子背散射衍射的制样方法和影响花样质量的因素[J]. 物理测试,2021,39(1):31.
|
[3] |
孙刚, 虞秀勇, 刘昊, 等. 制取铸造Al-Si合金EBSD样品的方法[J]. 材料科学与工艺,2021,29(3):75.
|
[4] |
YAO N C, FENG I W. Review high temperature oxidation of low alloy steels[J]. Journal of Materials Science, 1989, 24(1): 14.
|
[5] |
尹立新,崔桂彬,任群,等. 热轧带钢表面氧化铁皮的EBSD表征方法研究[J]. 首钢科技,2017(2):20.
|
[6] |
尹立新,崔桂彬,任群,等. 采用EBSD表征热轧钢板截面氧化铁皮微观结构的方法:北京,CN103837557B.2016-03-30.
|
[7] |
张孟仪. 热轧板氧化皮结构的显微表征[J]. 物理测试,2009,27(6):29.
|
[1] |
ZHANG Qiang, LI Hong-bo, CHEN Gang, ZHANG Jie, ZHANG Peng-wu, WANG Wu-zhou. Analysis and control of hot-rolled strip crown for cold-rolled middle-wave control[J]. Iron and Steel, 2023, 58(2): 90-95. |
[2] |
ZHANG Jie, KONG Ning, WANG Yi-bo, SONG Yu-wei. Quantitative evaluation and analysis on spalling of powdered iron oxide scale for automobile beam steel[J]. Iron and Steel, 2023, 58(1): 125-132. |
[3] |
CUI Gui-bin, JU Xin-hua, YAN Chun-lian, MA Ze-jun. Microstructure characterization of hot-dip Zn-Al-Mg coating of low alloy high strength steel[J]. Iron and Steel, 2023, 58(1): 153-160. |
[4] |
CAO Guang-ming, SHAN Wen-chao, LIU Xiao-jiang, WANG Chen-yang. High temperature oxidation behavior of Fe-2.2%Si steel in different atmosphere[J]. Iron and Steel, 2022, 57(8): 132-142. |
[5] |
GAO Xin-qiang, PENG Wei, FAN Zeng-wei, BAI Jia-xin, WEI Xi-cheng, DONG Han. Effect of purity on recrystallization texture and grain Schmid factor of pure iron[J]. Iron and Steel, 2022, 57(8): 160-167. |
[6] |
JIN Fengwei,FENG Ying,CHEN Zhaoyu,SUN Wenquan,ZHANG Yongjun. Pre-alculation optimization of finishing delivery temperature of hot strip head based on data driven[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 655-663. |
|
|
|
|