|
|
Design and experiment of automated eddy current testing system for multi-diameter shaft parts |
NIU Chenhui1,2, HUANG Xin1,2, REN Shugui1,2, AN Xiangpeng1,2 |
1. Advanced Technology & Materials Co., Ltd., Beijing 100094, China; 2. ATTL Advanced Materials Co., Ltd., Beijing 100094, China |
|
|
Abstract Aiming at the automated eddy current testing problem of surface defects in multi-diameter shaft parts for MOCVD equipment, a special automated eddy current testing system for multi-diameter shaft parts was developed. The self-adaption auxiliary device for the eddy current sensor was designed, and the research of automated eddy current testing equipment for reference samples and surface defects of multi-diameter shaft parts was conducted. The results showed that the combination of developed the eddy current sensor with auxiliary device and automatic detection system was able to eliminate the effect of lift-off effect on the eddy current signal. The rapid automatic eddy current testing for cracking defects, scoring defects and dent defects on surface of multi-diameter shaft parts for MOCVD equipment could be realized. Meanwhile, the detection efficiency could be significantly improved. The system was expected to be applied for the automated eddy current testing of complex multi-diameter shaft parts.
|
Received: 03 April 2023
|
|
|
|
[1] |
胡兴军.LED MOCVD设备的市场现状及其国产化问题分析[J].电源技术应用,2011,14(7):68.
|
[2] |
王雪莹.MOCVD装备技术及产业发展分析[J].中国高新技术企业,2013(3):1.
|
[3] |
李彦丽.MOCVD的原理与故障分析[J].电子工业专用设备,2014,43(11):36.
|
[4] |
许坚强.MOCVD设备与现代 MOCVD 技术研究[J].山东工业技术,2018(22):127.
|
[5] |
宋健,张清旭.MOCVD系统检漏技术[J].设备管理与维修,2019(17):110.
|
[6] |
李国华,吴淼.现代无损检测与评价[M].北京:化学工业出版社,2014.
|
[7] |
陈金贵.涡流检测技术在大型轴类锻件的应用[C]//2010远东无损检测新技术论坛论文集.昆山:江苏省特种设备安全监督检验研究院、江苏省机械工程学会无损检测学会、南京大学、南京航空航天大学,2010:202.
|
[8] |
陈金贵,黄颖.无缝钢管超声涡流自动检测方法研究[C]//2010钢材质量控制技术、形状、尺寸精度、表面质量控制与改善学术研讨会文集.北京: 中国金属学会青年委员会、北京机械工程学会,2010:133.
|
[9] |
李瑞忠.热轧轧辊涡流超声自动检测设备实现[C]//全国冶金自动化信息网2018年会论文集.昆明: 全国冶金自动化信息网、《冶金自动化》杂志社,2018:114.
|
[10] |
严剑刚,高鸣,罗俊.涡流技术在钨杆自动检测中的应用[J].无损检测,2018,40(6):6.
|
[11] |
张开良,林发炳,林春景.金属管棒材高速旋转涡流自动检测系统的研制与应用[C]//2013远东无损检测新技术论坛论文集. 济南:江苏省特种设备安全监督检验研究院、南京大学、南京航空航天大学、北京理工大学、山东省特种设备检验研究院、山东省质量技术监督干部学校、济南市特种设备监督检测所、江苏省机械工程学会无损检测分会、江苏省声学学会、山东省特种设备协会,2013:246.
|
[12] |
谭英杰,韩国有,董喜贵.抽油杆电涡流自动检测台设计[J]. 油气田地面工程,2008,27(12):34.
|
|
|
|