烧结过程余热资源回收利用技术进步与展望

董 辉, 王爱华, 冯军胜, 张 琦, 蔡九菊

钢铁 ›› 2014, Vol. 49 ›› Issue (9) : 1-9.

欢迎访问《钢铁》官方网站!今天是 2025年7月29日 星期二
钢铁 ›› 2014, Vol. 49 ›› Issue (9) : 1-9. DOI: 10.13228/j.boyuan.issn0449-749x.20130652
综合论述

烧结过程余热资源回收利用技术进步与展望

  • 董 辉, 王爱华, 冯军胜, 张 琦, 蔡九菊
作者信息 +

Progress and Prospect in Sintering Waste Heat Resource Recovery and Utilization Technology

  • 董 辉, 王爱华, 冯军胜, 张 琦, 蔡九菊
Author information +
文章历史 +

摘要

烧结过程余热回收与利用是降低烧结工序能耗的主要手段之一。概述了国内外烧结余热回收与利用技术发展状况,指出了中国烧结余热回收利用中存在的不足。从工艺流程、技术特点的角度重点阐述了烧结矿余热竖罐式回收发电工艺和烧结过程余热资源分级回收与梯级利用技术;给出了烧结烟气余热回收与脱硫脱硝一体化工艺的基本思路。提出应积极推广烧结过程余热资源分级回收与梯级利用技术,加快开发烧结矿余热竖罐式回收发电工艺,深入倡导烧结烟气余热回收与脱硫脱硝一体化的理念,为中国烧结工序的节能减排奠定技术基础。

Abstract

The waste heat recovery and utilization in sintering process is one of the means to decrease the energy consumption in sintering process. The current situations of waste heat recovery and utilization in sintering process at home and abroad are summarized, and the shortage existing in China is indicated. The power generation process of waste heat recovery and utilization for sinter in vertical tank and grade recovery and cascade utilization of waste heat from sintering process and are expounded emphatically from the perspective of process flow and technical features. The basic idea of the integrated process of waste heat recovery and desulfurization and denitration from sintering exhaust gas is given. It is pointed out that grade recovery and cascade utilization technology of waste heat from sintering process should be promoted actively, power generation process of waste heat recovery and utilization for sinter in vertical tank should be developed rapidly, and the concept of the integrated process of waste heat recovery and desulfurization and denitration from sintering exhaust gas should be deeply advocated so as to lay a technical foundation for China’s energy saving and emission reduction in sintering process.

关键词

烧结余热 / 发电 / 竖罐式回收 / 分级回收 / 梯级利用

图表

引用本文

导出引用
董辉, 王爱华, 张琦, . 烧结过程余热资源回收利用技术进步与展望[J]. 钢铁, 2014, 49(9): 1-9 https://doi.org/10.13228/j.boyuan.issn0449-749x.20130652
DONG Hui, YU Ai-Hua, ZHANG Qi, et al. Progress and Prospect in Sintering Waste Heat Resource Recovery and Utilization Technology[J]. Iron and Steel, 2014, 49(9): 1-9 https://doi.org/10.13228/j.boyuan.issn0449-749x.20130652

参考文献

[1]蔡九菊,王建军,陈春霞,等.钢铁工业余热资源的回收与利用[J].钢铁, 2007, 42(6):1-7 [2]蔡九菊,董辉,杜涛,等.烧结过程余热资源分级回收与梯级利用研究[J].钢铁, 2011, 46(4):88-92 [3]董辉,张浩浩,毛虎军,等.烧结热工测试与分析[J].钢铁, 2011, 46(11):93-98 [4] Asia Pacific Partnership for Clean Development and Climate.The State–of-the-Art Clean Technologies (SOACT) for Steelmaking Handbook (2nd Edition)[R]. 2010.12 [5] Rainer Remus, Miguel A.Aguado Monsonet, Serge Roudier, etc.. Best Available Techniques (BAT) Reference Document for Iron and Steel Production[R]. European Commission Joint Research Centre Institute for Prospective Technological Studies. 2013. [6] Kersting, K.; Josis, C. Countermeasures for Organic Emissions from Sinter Plants, ENCOSTEEL – Steel for Sustainable Development, 1997, on June 16-17, 1997 in Stockholm. [7] 徐树伟,彭益成,刘志斌,等.钢铁企业烧结余热发电技术发展探讨[J].工业锅炉, 2010, (5):45-50 [8]周翔.我国烧结余热发电现状及有关发展建议[J].烧结球团, 2012, 37(1):57-59 [9] 工业和信息化部.钢铁企业烧结余热发电技术推广实施方案[R]. 2009.12 [10]蔡九菊,董辉,杜涛,等.烧结过程余热资源分级回收与梯级利用研究[J].钢铁, 2011, 46(4):88-92 [11] 董辉 蔡九菊 赵勇,等.烧结过程余热资源高效回收与利用装置及方法:中国,ZL201110058524.2[P].2011-08-31. [12]董辉,蔡九菊,徐春柏,等.烧结过程余热资源分级回收与梯级利用示范工程[J].中国科技成果, 2012, (1):22-23 [13]董辉,赵勇,蔡九菊,等.烧结—冷却系统漏风问题研究[J].钢铁, 2012, 17(1):95-99 [14] 蔡九菊,董辉.烧结过程余热资源的竖罐式回收与利用方法及其装置:中国,ZL200910187381.8 [P]. 2009-09-15. [15] 董辉,刘文军,王博,等.一种烧结余热资源高效回收装置:中国,ZL201120219670.4[P]. 2012-02-08. [16]董辉,李磊,刘文军,等.烧结矿余热竖罐式回收利用工艺流程[J].中国冶金, 2012, 22(1):6-11 [17]董辉,李磊,蔡九菊,等.烧结余热回收竖罐内料层传热过程数值模拟[J].东北大学学报, 2012, 33(9):1299-1302 [18] 朱廷玉.烧结烟气净化技术[M]. 北京:化学工业出版社,2009. [19] 黎志明.烧结烟气余热回收与脱硫一体化工艺研究[D]. 沈阳:东北大学,2011.

基金

国家自然科学基金项目;辽宁省科技计划项目;中央高校基本科研业务费资助项目

19

Accesses

0

Citation

Detail

段落导航
相关文章

/