针对某2 250 mm宽带钢轧机出现的带钢断面板廓非对称性问题，提出综合1次楔形与3次楔形的不对称度概念来描述和评价板廓的非对称性。其次，采用压靠法获得轧机的弹跳曲线，并利用基于影响函数法的非对称辊系变形模型，计算分析轧机刚度差对带钢板廓非对称性的影响。在生产中，通过轧机设备关键零部件维修和定量预设定轧辊倾辊量达到对因轧机刚度差而引起的板廓非对称性进行控制和消除，从而保证宽带钢板廓的对称性和轧制稳定性。
Abstract
Characters of strip contour on 2 250 mm production line were collected. The concept about contour asymmetrical character was proposed in a way that asymmetry was expressed by using the degree of asymmetry， which was integrated with linear term and cubic term wedge. This concept can be the base of evaluation and control of strip contour asymmetry. By measuring and analyzing the mill stretch curves under the contact roll condition， it is found that the stiffness differences between operation sides and work sides are obvious and can not be ignored. Roll deformation model of asymmetric rolling mill has been built by using the method of influence function. Through asymmetric rolling model and mathematic model， this paper analyzed the effects on contour asymmetry which was caused by stiffness differences. The strategies including the maintaining of key components and the preset adjustment of roll incline have been applied in industrial production and gained satisfying effort.
关键词
热连轧机，非对称，刚度，辊系变形模型，轧辊倾斜
{{custom_keyword}} /
Key words
hot strip mill, asymmetry, stiffness, roll stack deformation model, roll incline
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Garber E A, Bolobanova N L, Traino A I. Simulation of the six-high stand stiffness to increase the accuracy of cold-rolled strips[J]. Russian Metallurgy. 2012(3): 215-226.
[2] 张进之. 板带轧制过程板形测量和控制的数学模型[J]. 冶金设备. 1997, 12(6):1-6.
[3] 孟文旺，孙彤彤. 基于精轧压靠数据的轧机刚度测量方法[J]. 重型机械. 2009(1): 54-57.
[4] 潘海波，张宏昌，赵卫国. 3500mm宽厚板轧机的刚度测定与实际应用[J]. 宽厚板. 2010, 16(06):33-35.
[5] 董立杰，何安瑞，宋勇，等. 热带钢轧机辊系纵向刚度在线计算模型[J]. 北京科技大学学报. 2009(11): 1452-1456.
[6] 刘涛，薛志勇，邢艳杰. 基于数据挖掘的轧机压下系统刚度提取[J]. 机床与液压. 2012, 40(9): 21-23.
[7] 金兹伯格. 高精度板带材轧制理论与实践[M]. 北京: 冶金工业出版社, 2000.
[8] 李洪波，张杰，曹建国，等. 热轧带钢横截面多参数表示及高精度板形控制[J]. 北京科技大学学报. 2009(4): 487-491.
[9] Wang X, Wang F, Zhong S, et al. Equation and Graphical Solution of Characteristic Parameter Relationship of Strip Steering in Rolling Process[M]. Electrical, Information Engineering and Mechatronics 2011. London: Springer, 2012, 911-919.
[10] 高永生,邹家祥,张沛臣,等. 非对称轧制时轧辊轴向力的影响函数法模型──四辊轧机轴向力学行为的研究[J]. 北京科技大学学报.1994, 16(04):346-350.
[11] 白振华,韩林芳,李经洲,等. 四辊轧机非常态轧制时板形模型的研究[J]. 机械工程学报. 2012,48(20):77-82.
[12] 孔繁甫,何安瑞,邵健. 快速辊系变形在线计算方法研究[J]. 机械工程学报. 2012,48(02):122-127.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
基金
机电一体化轧制模型研究与应用
{{custom_fund}}
