中碳钢温变形微观组织演变

李红斌

doi:10.13228/j.boyuan.issn0449-749x.20160124

钢铁 ›› 2016, Vol. 51 ›› Issue (9) : 63-69. DOI: 10.13228/j.boyuan.issn0449-749x.20160124

钢铁材料

中碳钢温变形微观组织演变

李红斌¹， ²，于恩林¹

作者信息 +

Investigation on microstructure evolution of medium carbon steel during warm deformation

李红斌¹， ²，于恩林¹

Author information +

文章历史 +

摘要

利用Gleeble-3500热模拟试验机研究了不同变形温度（550、600、650、700 ℃）和不同变形速率（0.001、0.01、0.1、1、10 s－1）对热轧态中碳钢温变形过程中变形行为的影响，并结合热加工图探明了在细小晶粒铁素体基体上形成均匀分布细小渗碳体颗粒复相组织的最佳工艺窗口。结果表明，温变形过程中，会发生铁素体再结晶以及渗碳体片层动态球化行为，其微观组织演变对流变应力影响较大；根据绘制的热加工图，温变形的适宜温度区间为630～700 ℃，速率区间为0.30～10和0.001～0.007 s－1，在该工艺区间变形，初始组织转变为细小均匀铁素体基体上分布着细小粒状渗碳体的复相组织。

Abstract

The warm compression test for medium carbon steel was carried out on Gleeble-3500 thermal-simulation machine. The effects of deformation temperature (550， 600， 650， 700 ℃) and strain rate (0.001， 0.01， 0.1， 1， 10 s－1) on the microstructure evolution were studied. The processing map was established to explore the best parameter combination to generate the evenly distributed and fine cementite particles on the ferrite matrix. The results show that during the warm deformation， dynamic spheroidization of lamellar cementite and ferrite dynamic recrystallization occurred， and the flow stress was influenced by the evolution of microstructure. According to the processing map， the best processing parameter that the temperature range of 630-700 ℃ and the strain of 0.30-10 and 0.001-0.007 s－1 could be obtained. The composite microstructure with ultrafine ferrite grains and uniform distribution of cementite particle was obtained.

关键词

中碳钢温变形 / 热加工图 / 动态软化 / 渗碳体球化

图表

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用

李红斌. 中碳钢温变形微观组织演变[J]. 钢铁, 2016, 51(9): 63-69 https://doi.org/10.13228/j.boyuan.issn0449-749x.20160124

LI Hong-Bin. Investigation on microstructure evolution of medium carbon steel during warm deformation[J]. Iron and Steel, 2016, 51(9): 63-69 https://doi.org/10.13228/j.boyuan.issn0449-749x.20160124

参考文献

[1] 1.王宝奇，宋晓艳，李红娟，等.含铝超高碳钢等温球化工艺的研究[J].材料科学与工艺，2004,12(4): 337-341.
[2] Z.Q.Lv, B.Wang, Z.H.Wang, etc. Effect of Cyclic Treatments on Spheroidizing Behavior of Cementite in High Carbon Steel[J]. Mater. Sci. Eng. A, 2013,574:143-148.
[3] 吴涛. 淬火碳钢温变形流变行为与微观组织演变研究[D]，燕山大学，2013.12.
[4] Q.Li,T.S.Wang, T.F.Jing, et al. Warm deformation behavior of quenched medium carbon steel and its effect on microstructure and mechanical property[J]. Mater. Sci. Eng. A, 515(2009)38-42.
[5] 刘涛，杨王玥，陈国安，等.共析钢温变形过程组织球化与超细化[J],北京科技大学学报,2008,30(6):604-609.
[6] 熊毅, 傅万堂，厉勇，等.高碳钢的文变形行为[J].钢铁研究学报，2007,18（5）：58-62.
[7] 周家林，史密，张陪毅，等 45钢低温区热变形行为研究[J],钢铁，2014,49,(10):62-65.
[8] 李志杰，彭艳，刘宏民,等.中碳钢温变形的力学特性[J].北京理工大学学报，2013,33(4): 426-429.
[9] Ozturk F, Toros S and Kilic S. Tensile and Spring-Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures[J]. J. Iron. Steel Res. Int. 2009. 16(6): 41-46
[10] 张浩, 徐文臣, 单德斌. Ti43Al14Nb0.03Y合金高温热压缩变形行为及其组织演变[J].稀有金属材料, 2009, 38(7):1368-1371.
[11] 张晓丹，A.Godfrey, 刘伟，等. 珠光体钢丝冷拉拔过程中微观组织及铁素体微区取向与织构演变[J],金属学报，2010,46(2):141-146.
[12] H. Rastegaria, A. Kermanpur, A. Najafizadeh,et al. Warm deformation processing maps for the plain eutectoid steels[J]. J. Alloy. Compd, 626,(2015): 136-144.
[13] D.L. Bly;O.D. Sherby;C.M. Young， et al. Influence of thermal mechanical treatments on the mechanical properties of a finely spheroidized eutectoid-composition steel[J]. Mater. Sci. Eng. A, 1973, 12(1): 41-46.
[14] Storojeva L, Ponge D, Kaspar R, et al. Development of micrustructure and texture of medium carbon steel during heavy warm deformation[J]. Acta Mater, 2004,52:2209-2220.
[15] 熊毅,陈正阁,厉勇,等. 温压缩变形过程中渗碳体的球化行为[J].材料热处理学报,2008, 29 (1) :42-46.
[16] Y.V.R.K. Prasad, S. Sasidhara, Hot working guide: a compendium of processing maps[M], ASM international, Materials Park, Ohio, 1997.
[17] 权国政，温海荣，梁建婷，等.TB6钛合金热变形行为及加工图[J], 材料热处理学报，2015，,36(4): 25-33.