球磨机衬板高锰钢性能改进

李彦龙,齐 亮,邵传兵,马琳亭,程 亮,李银丽

钢铁 ›› 2018, Vol. 53 ›› Issue (3) : 72-75.

PDF(783 KB)
欢迎访问《钢铁》官方网站!今天是 2025年7月26日 星期六
PDF(783 KB)
钢铁 ›› 2018, Vol. 53 ›› Issue (3) : 72-75. DOI: 10.13228/j.boyuan.issn0449-749x.20170424
钢铁材料

球磨机衬板高锰钢性能改进

  • 李彦龙1,齐 亮2,邵传兵1,马琳亭1,程 亮1,李银丽1
作者信息 +

Improvement of high manganese steel in ball mill lining

  • 李彦龙1,齐 亮2,邵传兵1,马琳亭1,程 亮1,李银丽1
Author information +
文章历史 +

摘要

针对西北某铸造厂目前生产的高锰钢耐磨衬板在使用过程中容易破碎和变形的问题,通过对现生产的高锰钢成分与性能的分析,向高锰钢中添加一定量的合金添加剂,并改进热处理方式,使高猛钢耐磨衬板的硬度、耐磨性、抗冲击性能和寿命都有较大的提升,硬度提高10.7%,耐磨性提高62.7%,抗拉强度提高7.4%,屈服强度提高8.13%。

Abstract

The problem of easy cracking and deformation of high manganese steel wear liner was studied by analysis of composition and properties. The hardness,wear resistance,impact resistance and service life of high manganese steel wear liner were greatly improved by added a certain amount of alloy additives and improve the heat treatment. Finally the hardness,abrasion resistance,tensile strength and yield strength of high manganese steel were improved 10.7%,62.7%,7.4% and 8.13% respectively.

关键词

球磨机 / 衬板 / 高锰钢 / 性能 / 改进

图表

引用本文

导出引用
李彦龙, 齐亮, 邵传兵, . 球磨机衬板高锰钢性能改进[J]. 钢铁, 2018, 53(3): 72-75 https://doi.org/10.13228/j.boyuan.issn0449-749x.20170424
LI Pan-Long, ZI Liang, SHAO Zhuan-Bing, et al. Improvement of high manganese steel in ball mill lining[J]. Iron and Steel, 2018, 53(3): 72-75 https://doi.org/10.13228/j.boyuan.issn0449-749x.20170424

参考文献

[1] 定治明,刘静,鲁修宇,等.球磨机衬板材料的发展概况及选材要点[J].矿山机械,2010,(19):85-88.
[2] 罗飞扬,李安运,程明焱,等.中锰钢在球磨机衬板上的应用[J].有色金属科学与工程,2011,02(3):6-8.
[3] 仰明.一种改性高锰钢合金衬板,CN104152819A[P].2014.
[4] 赵金山,党君鹏,许科敏,等.稀土改性高锰钢衬板的生产[J].铸造技术,2009,30(6):833-834.
[5] 张燕平,李东南.不同壁厚高锰钢铸件水韧处理与耐磨性的研究[J].热加工工艺,2013,42(8):173-176.
[6] 李大军、侯蕊、LIDajun,等.Mn13高锰钢的热处理工艺研究[J].热加工工艺,2010,39(16):158-160.
[7] 蔡岳洪,胡晖.提高高锰钢衬板性能的研究[J].铸造技术,2000,(3):6-9.
[8] Chen L, Zhao Y, Qin X. Some Aspects of High Manganese Twinning-Induced Plasticity(TWIP) Steel, A Review[J]. Acta Metallurgica Sinica(English Letters), 2013, 26(1): 1-15.
[9] Saeed-Akbari A, Mosecker L, Schwedt A, et al. Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: Part I. Mechanism maps and work-hardening behavior[J]. Metallurgical and Materials Transactions A, 2012, 43(5): 1688-1704.
[10] 李常锋,李文生,白创明,等.高锰钢球磨机衬板的生产技术[J].铸造技术,2004,25(6):405-406.
[11] 赵杰,徐海峰,时捷,等.细晶强化和位错强化对中锰马氏体钢的强化作用[J].钢铁,2012, 47(8):57-61.
[12] 刘春明,王建军,林仁荣,等.微量碳在钢铁材料细晶强化中的作用[J].材料科学与工艺,2001,9(3):301-304.
[13] LI X, WANG C, Lu L U. Microstructure and impact wear resistance of TiN reinforced high manganese steel matrix[J]. Journal of Iron and Steel Research, International, 2012, 19(7): 60-65.
[14] Dobrzański L A, Borek W. Hot-rolling of advanced high-manganese C-Mn-Si-Al steels[C]//Materials Science Forum. Trans Tech Publications, 2012, 706: 2053-2058.
[15] Xu H F, Zhao J, Cao W Q, et al. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2 C–5Mn)[J]. Materials Science and Engineering: A, 2012, 532: 435-442.

基金

甘肃省有色金属冶炼新工艺及伴生稀散金属高效综合利用重点实验室专项

PDF(783 KB)

13

Accesses

0

Citation

Detail

段落导航
相关文章

/