2 180 mm超宽六辊CVC冷轧机SMS-EDC边降控制特性

杨光辉,张高尚,张 杰,李洪波,芦建永

钢铁 ›› 2018, Vol. 53 ›› Issue (5) : 52-61.

PDF(1702 KB)
欢迎访问《钢铁》官方网站!今天是 2025年7月29日 星期二
PDF(1702 KB)
钢铁 ›› 2018, Vol. 53 ›› Issue (5) : 52-61. DOI: 10.13228/j.boyuan.issn0449-749x.20170538
压力加工

2 180 mm超宽六辊CVC冷轧机SMS-EDC边降控制特性

  • 杨光辉,张高尚,张 杰,李洪波,芦建永
作者信息 +

SMS-EDC edge control characteristics of 2 180 mm super-wide 6-high CVC cold rolling mill

  • 杨光辉,张高尚,张 杰,李洪波,芦建永
Author information +
文章历史 +

摘要

为了提升某2 180 mm超宽冷连轧机的综合板形控制功能,特别是边降控制功能,建立了针对SMS-EDC工作辊柔性区的力学模型,分析并计算了工作辊柔性区的端部结构及其主要参数。通过使用大型有限元软件ANSYS15.0建立了辊系三维有限元仿真模型,针对SMS-EDC工作辊分析计算了不同的工作辊柔性区长度和柔性区内径等结构参数、不同的弯辊力和窜辊量等工艺条件下的轧机辊缝中心凸度、边部减薄量等的影响系数。最后推导给出了边降反馈控制中的工作辊窜辊量和弯辊力补偿的计算公式。上述研究为2 180 mm超宽冷轧机边降控制手段的现场实施应用提供了一定的理论参考。

Abstract

In order to improve the comprehensive shape control capability of a 2 180 mm super-wide tandem cold rolling mill, especially the edge drop control capability, the mechanical model was established for the flexible zone of SMS-EDC work roll, and the end structure and main parameters of the flexible zone of work roll were analyzed and calculated. The three-dimensional finite element model of roll system was built by the finite element software ANSYS15.0. Aiming at the SMS-EDC work roll, the influence coefficients of the central crown and edge drop were analyzed under different work roll’s parameters such as length and internal diameter of flexible area and under different shape control means such as bending force and shifting. Finally, the calculation formulas of roll shifting and bending force of work roll were given in the edge feedback control after deduction. The study can provide a theoretical foundation for the application of edge drop control means on 2 180 mm tandem cold rolling mill.

关键词

有限元法 / SMS-EDC辊 / 冷连轧机 / 力学模型 / 边降

图表

引用本文

导出引用
杨光辉, 张高尚, 张杰, . 2 180 mm超宽六辊CVC冷轧机SMS-EDC边降控制特性[J]. 钢铁, 2018, 53(5): 52-61 https://doi.org/10.13228/j.boyuan.issn0449-749x.20170538
YANG Guang-Hui, ZHANG Gao-Shang, ZHANG Jie, et al. SMS-EDC edge control characteristics of 2 180 mm super-wide 6-high CVC cold rolling mill[J]. Iron and Steel, 2018, 53(5): 52-61 https://doi.org/10.13228/j.boyuan.issn0449-749x.20170538

参考文献

[1] 曾尚武. 1700热轧板带钢凸度控制的研究[D]. 鞍山:辽宁科技大学材料与冶金学院, 2011: 1?30.
[2] 吴海淼. 冷轧薄板边部减薄现象的分析研究[D]. 秦皇岛: 燕山大学机械工程学院, 2007: 1?10.
[3] 张秀芳, 白云阶, 张心白, 等. 热带边部减薄及凸度控制技术结合的探讨. 轧钢, 1999(1): 40?42.
[4] Setzer H. Development in cold rolling[Z]. SMS-Demeg, 2002.
[5] Grimm K. Tandem cold rolling mill for Thyssen Krupp Stahl AG [Z]. SMS-Demeg, 2002.
[6] Nakanishi T, Sugiyama T. Application of HC mill in hot steel strip rolling[J]. Hitachi Review, 1985, 32(2): 59?64.
[7] 解建平. PC轧机技术及其在宝钢的应用[J]. 冶金设备, 2002(1): 27?30.

[8] 方胜年. 森吉米尔20辊轧机的新技术[J]. 电工钢, 2002(2): 16?17.

[9] 许健勇. 冷轧薄板的厚度与板形高精度控制技术[J]. 宝钢技术, 2001(4): 1?6.

[10] 贾广顺. SMS-EDC轧机边降控制能力特性研究[D]. 秦皇岛: 燕山大学机械工程学院, 2007.

[11] 杨光辉, 张杰 ,曹建国, 等. 轴向移位变凸度技术[M]. 北京: 冶金工业出版社, 2016: 41?45.

[12] 虞跃生, 刘光宇. 管材压扁的回弹分析研究[J]. 汽车科技, 2000 (4): 17?19.

[13] 宋华, 于晓光, 王德斌, 等. 斜轧钢管矫正机压扁量的确定[J]. 钢管, 1999,28(03): 10?14.

[14] 于桂杰, 于永南, 宋俊立. 集中载荷作用下的套管抗挤能力分析[J]. 石油机械, 2006, 34(12): 28?31.

[15] 张赟, 杨荃, 邵健, 等. UCMW轧机正弦函数形单锥度工作辊边降控制[J]. 北京科技大学学报, 2009, 31(12): 1611?1615.

[16] 周西康, 张清东, 吴彬, 等. DSR 板形调控功效的ANSYS 仿真[J]. 冶金设备, 2004(5): 8?11.

[17] 黄纶伟, 陈先霖, 张清东, 等. 板带冷轧机板形控制技术调控功效的比较研究[J] . 冶金设备, 2000(1): 4?7.

[18] 张清东, 孙向明, 白剑. 六辊CVC 轧机辊系变形的有限元分析[J]. 中国机械工程, 2007, 18(7): 789?792.

[19] 张岩, 高健,吴鲲魁, 等. 单锥度辊冷轧机边降减薄控制应用研究[J].冶金自动化, 2016, 40(1): 45?49.

基金

北京高校青年英才计划

PDF(1702 KB)

Accesses

Citation

Detail

段落导航
相关文章

/