铁前数模技术进展与大数据应用探讨

马富涛; 张建良; 张磊; 焦克新; 郝良元; 刘福龙

doi:10.13228/j.boyuan.issn0449-749x.20180140

PDF(2231 KB)

钢铁 ›› 2018, Vol. 53 ›› Issue (12) : 1-9. DOI: 10.13228/j.boyuan.issn0449-749x.20180140

综合论述

铁前数模技术进展与大数据应用探讨

马富涛¹，张建良¹，张磊¹，焦克新¹，郝良元²，刘福龙²

作者信息 +

Introduction of development and progress of mathematical modeling technology in iron-making area and discussion on application prospects of big data technology

马富涛¹，张建良¹，张磊¹，焦克新¹，郝良元²，刘福龙²

Author information +

文章历史 +

摘要

高炉专家系统是近几十年铁前数模技术高度集成的典型代表，回顾了铁前专家系统的发展历程和概况，剖析了高炉专家系统技术存在的历史局限性和技术瓶颈，着重介绍了近年来铁前数模技术的继承与发展，以及取得的成效，最后从钢铁行业需求出发，探讨了大数据及机器学习技术在铁前领域尤其是高炉领域的应用前景和研究方向。

Abstract

The blast furnace expert system is a typical representative of the highly integrated mathematical modeling technology in the iron-making area in recent decades. The development history and the general situation of the iron-making expert system were reviewed， and historical limitations and technical bottlenecks of the expert system technology were analyzed. Furthermore， the inheritance and the progress of the iron-making mathematical modeling technology in recent years were introduced， as well as achieved results. Finally， according to the actual requirement and status of the present steel industry， application prospects and research directions of big data and machine learning technology in the iron-making area were discussed， especially in the blast furnace area.

关键词

炼铁 / 高炉 / 专家系统 / 大数据 / 机器学习

图表

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用

马富涛, 张建良, 张磊, 等. 铁前数模技术进展与大数据应用探讨[J]. 钢铁, 2018, 53(12): 1-9 https://doi.org/10.13228/j.boyuan.issn0449-749x.20180140

MA Fu-Shou, ZHANG Jian-Liang, ZHANG Lei, et al. Introduction of development and progress of mathematical modeling technology in iron-making area and discussion on application prospects of big data technology[J]. Iron and Steel, 2018, 53(12): 1-9 https://doi.org/10.13228/j.boyuan.issn0449-749x.20180140

参考文献

[1] 邹明秋.国内外高炉数学模型应用研究的概况[J].冶金自动化,1988(04):12-18.
Zou Ming-qiu. Development of Mathematic Model of Blast Furnace at Home and Abroad[J]. Metallurgical Industry Automation, 1988.
[2] 治金部自动化研究所. 现代高炉检测与自动控制技术[M]. 1986.
Institute of Automation, Metallurgical Department. Modern blast furnace inspection and automatic control technology [M]. 1986.
[3] 王茂华,汪保平,惠志刚.高炉过程控制与专家系统[J].山东冶金,2005(03):4-7.
Wang Mao-hua, Wang Bao-ping, Hui Zhi-gang. Process Control and Expert System of Blast Furnace [J].Shandong Metallurgy,2005(03):4-7.
[4] 马富涛,周检平等. 迁钢3号高炉专家系统的研发与应用[A]. 冶金自动化 2011年S2, 510－513.
Ma Fu-tao, Zhou Jian-ping, Wu Jian, et al. Development and application of expert system for No. 3 blast furnace in Qian-gang Group [A]. Metallurgical Automation 2011 S2, 510-513.
[5] 马富涛,张建良,刘云彩. 基于人工智能算法的高炉布料数值模拟[J].钢铁,2017,52(06):18-25.
Ma Fu-tao, Zhang Jian-liang, Liu Yun-cai. BF burden distribution numerical simulation based on genetic algorithm [J]. Iron & Steel, 2017,52(06):18-25.
[6] 马富涛.炉缸侵蚀结厚监测模型的研发与应用[J].钢铁研究,2013,41(04):9-14.
Ma Fu-tao. Development and application of hearth-bottom erosion and accretion model of blast furnace [J]. Research on Iron and Steel,2013,41(04):9-14.