影响高炉燃料比的关键因素一直是炼铁界争论的课题。对于直接还原度或吨铁热消耗量在降低燃料比中的作用问题,涉及高炉理论和生产操作实践,对炼铁观念、技术发展方向以及生产技术方针都有重大的影响。如2020年提出的“以风量为纲,以炉温为基础”的生产原则,造成燃料比居高不下。为了深入探究决定燃料比的关键因素,采用Rist线图和评价高炉生产效率的方法对22座容积大于4 000 m3高炉的生产数据进行了计算和分析,结果表明,吨铁热消耗量对燃料比的高低起着关键的作用。这说明影响高炉燃料比的决定性因素是风口燃烧燃料量和吨铁风口耗氧量,而不是直接还原度。此外,用还原动力学和评价高炉生产效率的方法,对某公司高炉采用大风量和过度中心加焦操作模式而煤气利用率和炉身效率却很高的问题进行了分析,认为这是违反高炉冶炼规律的。高炉冶炼应该遵循炼铁界普遍认同的高效、优质、低耗、长寿、环保的基本原则和技术方针,以降低燃料比为中心,高效利用资源、能源,提升生产的效率和效益。
Abstract
The key factors affecting the fuel rate have long been the subject of debate in the ironmaking community. In fact, both theoretical and practical knowledge of blast furnace operation are required in order to reduce the fuel rate by studying the degree of direct reduction, or the heat consumption per ton of hot metal. This subject has a significant impact on the basic concepts, technical development directions, and production technical guidelines of the blast furnace. For example, in 2020, some people put forward the production principle of "Blast volume as the key link and hot metal temperature as the basis", which results in a high fuel rate. It raises the question of seeking the key factors to determine the fuel rate in the blast furnace operation. The Rist blast furnace operation diagram and evaluation method of blast furnace production is used for the analysis of the data collected from 22 blast furnaces (>4 000 m3). The outcome of the analysis shows that the heat consumption per ton of hot metal plays a key role in the fuel rate. This means that the amount of combustibles burned and the oxygen consumed in the tuyere zone play a decisive role, rather than the direct reduction degree. In addition, the method of reduction kinetics and evaluation of blast furnace production efficiency is used to analyze a phenomena that the high gas utilization and shaft efficiency of some blast furnaces seem cosxisting with the blast volume and adopt excessive center coke charging operation. It is considered that this is against the law of blast furnace operation.The blast furnace should follow the basic principles generally recognized by the ironmaking industry which insure the high efficiency of the production, high quality of the hot metal, low consumption, long life and environmental protection. Reducing of the fuel rate is essential, along with efficization use of the resources, energy, improving of the efficiency of the blast furnace operation and itse the economic efficiency.
关键词
直接还原度 /
吨铁总热需要量 /
吨铁风口耗氧量 /
燃料比 /
炉身效率
{{custom_keyword}} /
Key words
direct reduction degree /
total heat requirement /
oxygen consumption /
fuel rate /
shaft efficiency
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 张建良,李克江,刘征建,等. 氢冶金初探[M]. 北京:冶金工业出版社,2021.(ZHANG J L, LI K J, LIU Z J,et al.Preliminary Exploration of Hydrogen Metallurgy[M]. Beijing: Metallurgical Industry Press, 2021.)
[2] ПABJIOB M A.炼铁学[M]. 北京钢铁工业学院冶金系炼铁教研组译.北京:高等教育出版社, 1957.(ПABJIOB M A. Iron Metallurgy[M]. Translated by the Teaching and Research Group of the Department of Metallurgy, Beijing Institute of Iron and Steel Technology. Beijing:Higher Education Press, 1957.)
[3] 东北工学院炼铁教研室. 现代炼铁学[M]. 北京:冶金工业出版社,1959.(Ironmaking Teaching and Research Department of Northeast Institute of Technology. Modern Ironmaking[M]. Beijing:Metallurgical Industry Press, 1959.)
[4] 北京钢铁学院炼铁教研室. 炼铁学[M]. 北京:冶金工业出版社,1960.(Ironmaking Teaching and Research Department of Beijing Iron and Steel Institute. Ironmaking[M]. Beijing:Metallurgical Industry Press, 1960.)
[5] 炼铁设计参考资料编写组.炼铁设计参考资料[M].北京:冶金工业出版社,1975.(Ironmaking Design Reference Group. References for Ironmaking Design[M].Beijing:Metallurgical Industry Press, 1975.)
[6] 王筱留. 钢铁冶金学(炼铁部分)[M]. 北京:冶金工业出版社, 2006.(WANG X L.Iron and Steel Metallurgy (Ironmaking part)[M]. Beijing:Metallurgical Industry Press, 2006.)
[7] 成兰伯. 高炉炼铁工艺及计算[M]. 北京:冶金工业出版社, 1991.(CHENG L B.Process and Calculation of Blast Furnace Ironmaking[M]. Beijing:Metallurgical Industry Press, 1991.)
[8] 周传典. 高炉炼铁生产技术手册[M]. 北京:冶金工业出版社, 2002.(ZHOU C D.Technical Manual of Blast Furnace Ironmaking Production[M]. Beijing:Metallurgical Industry Press, 2002.)
[9] 项钟庸,王筱留. 高炉设计:炼铁工艺设计理论与实践[M]. 北京:冶金工业出版社,2014.(XIANG Z Y, WANG X L.Blast Furnace Design:Theory and Practice of Ironmaking Process Design[M]. Beijing: Metallurgical Industry Press,2014.)
[10] КИTAEB Б И. Разитие Тепообменных и Восстановителъных Процессов в Доменной Печи[M]. Металлугиздат:Сбфизика Химические Основы Производства Чугуна, 1956.
[11] RIST A,MEYSSON N.Graphic investigation of minimum blast-furnace emission at low wind temperature[J]. Journal de Metallurgie, 1964(2): 121.
[12] ДAHCKOB Я Г, ЛялюкВ П, Дансков ДЭ. Спажыванне коксу в даменнай печы[J]. Сталь, 2013, 43(6):370.
[13] ДансковЯ Г, ЛялюкВ П, Дансков ДЭ.Спажыванне коксу в даменнай печы[J].Сталь, 2014, 44(11): 824.
[14] 李肇毅,姜维忠. 高炉冶炼的碳耗结构分析及降低碳耗的方向思考[J]. 宝钢技术,2017(4):38.(LI Z Y, JIANG W Z. Carbon consumption structure analysis of blast furnace operation and direction of reducing carbon consumption[J]. Baosteel Technology, 2017(4): 38.)
[15] 车玉满,郭天永,孙鹏,等. 高炉降低碳素消耗技术研究[J]. 鞍钢技术,2018 (5): 5.(CHE Y M, GUO T Y, SUN P, et al. Study on technology of reducing carbon consumption in ironmaking by blast furnace[J]. Angang Technology, 2018(5): 5.)
[16] 项钟庸. 评价高炉生产效率的指标与Rist包络线[J]. 炼铁,2022,41(2): 49.(XIANG Z Y. Evaluation of blast furnace production efficiency Indicator and Rist envelope curves[J]. Ironmaking, 2022,41(2): 49.)
[17] 项钟庸. 吨铁风口耗氧量对高炉生产效率的影响[J]. 炼铁,2022,41(3): 46.(XIANG Z Y. Role of tuyere oxygen consumption on blast furnace production efficiency[J].Ironmaking, 2022,41(3): 46.)
[18] PAUL S, ROY S K, SEN P K.Blast furnace carbon rate using carbon-direct reduction(C-DRR) diagram[J]. Metallurgical and Materials Transaction B, 2013,44(2): 87.
[19] KAJIKAWA S, YAMAMOTO R, NAKJIMA R,et al.Phenomenaina a blast furnace operated at an extromely low fuel rate[J]. Transaction Steel Institute,1983,23:738.
[20] 张庆喜,曾伟涛. 武钢8号高炉高产长寿的主要经验. 炼铁,2020,39 (1): 1.(ZHANG Q X, ZENG W T. The main experience of high yield and long life of No. 8 blast furnace of WISCO[J]. Ironmaking, 2020,39(1): 1.)
[21] 沈峰满,施月循. 高炉内气-固反应动力学[M]. 北京:冶金工业出版社, 1994.(SHEN F M, SHI Y X.Gas-solid Reaction Kinetics in Blast Furnace[M]. Beijing:Metallurgical Industry Press, 1994.)
[22] 山口一良. 高炉の還元性,通気性に及ぼす块成矿中的脉石,気孔の影响[J]. 铁と鋼,2001,87(5):335
[23] 中本将嗣,中里英树,川端弘俊. 融液による気孔闭塞を伴うFeO压粉体の還元举动[J]. 铁と鋼,2004,90(1):1.
[24] 小西宏和,加藤谦吾,小野英树. 初期融液领域における酸化铁の還元举动と盐基度の影响[J]. 铁と鋼,2019,105(12):1099.
[25] 稲吉篤,林昭二. 焼結鉱の高炉模擬反応挙動に及ぼす水素の影響[J]. 铁と钢, 2010, 96(1): 30.
[26] BONNIVARD G, RIST A.Experimental study of the reduction of iron ore slags by a countercurrent gas[J]. Revue de Metallurgie, 1962, 59(5): 401.
[27] RIST A, BONNIVARD G.Reduction of an iron oxide bed by a gas (I)[J]. Journal de Metallurgie, 1966, 63(3): 197.
[28] RIST A,BONNIVARD G.Reduction of an iron oxide bed by a gas (II)[J]. Journal de Metallurgie, 1966, 63(4): 296.
[29] CLAVEAU A, GUILLOT J B,RIST A.The reduction of mixed charges in the blast furnace theory and laboratory study[J]. Revue de Metallurgie, 1976, 73(10): 641.
[30] 项钟庸,银汉.高炉生产效率评价方法[J].钢铁,2011,46(9):17.(XIANG Z Y, YIN H. Evaluation method on productive efficiency of ironmaking in blast furnace[J]. Iron and Steel, 2011,46(9) : 17.)
[31] 项钟庸,王亮,银汉. 高炉生产效率评价体系如何更科学[N].中国冶金报, 2011-12-1(B1).(XIANG Z Y, WANG L, YIN H. How to make the evaluation system of blast furnace production efficiency more scientific[N]. China Metallurgical News, 2011-12-1(B1).)
[32] 项钟庸,王筱留,银汉. 再论评价高炉生产效率的方法[J].钢铁,2013,48(3):86.(XIANG Z Y, WANG X L, YIN H. More discussion on evaluation method for productive efficiency of ironmaking blast furnace[J]. Iron and Steel, 2013,48(3) : 86.)
[33] 项钟庸,刘云彩,王筱留,等. 用评价高炉生产的新方法落实低碳炼铁方针[J]. 中国冶金,2016,26(7):15.(XIANG Z Y, LIU Y C, WANG X L, et al. Policy implementation of low-carbon Ironmaking using a new evaluation method of blast furnace production efficiency[J]. China Metallurgy, 2016,26(7): 1.)
[34] 项钟庸,王筱留. 炉腹煤气量指数与高炉过程[C]//2015年全国大高炉炼铁学术年会论文集.柳州:中国金属学会, 2015.(XIANG Z Y, WANG X L.Bosh gas index and blast furnace process[C]//Conference Proceedings of the 2015 National Large Blast Furnace Ironmaking Conference. Liuzhou:The Chinese Society for Metals, 2015.)
[35] 项钟庸,王筱留,张建良,等. 高炉高效低耗炼铁理论与实践[M]. 北京:冶金工业出版社, 2020.(XIANG Z Y, WANG X L, ZHANG J L, et al.Theory and Practice of High Efficiency and Low Energy Consumption Smelting in Blast Furnace[M]. Beijing:Metallurgical Industry Press, 2020.)
[36] 项钟庸,王筱留,顾向涛. 再论落实高炉低碳炼铁生产方针[J]. 中国冶金,2021, 31 (9): 9.( XIANG Z Y, WANG X L, GU X T. Further discussion implementing production policy of low carbon ironmaking of blast furnace[J]. China Metallurgy,2021, 31(9). 9.
[37] 中华人民共和国国家标准. GB 50427—2008高炉炼铁工艺设计规范[S]. 北京:中华人民共和国建设部,中华人民共和国国家质量监督检验检疫总局,2008.(National Standard of the People's Republic of China. GB 50427—2008 Code for Design Blast Furnace Technology[S]. Beijing:Ministry of Construction, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, 2008.)
[38] 朱仁良. 宝钢大型高炉操作与管理[M]. 北京:冶金工业出版社, 2015.(ZHU R L.Operation and Management of Baosteel's Large Sized Blast Furnace[M]. Beijing: Metallurgical Industry Press, 2015.)
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}