一种新型中厚板头部厚度控制方法

孙涛;杜平;刘相华;刘军川;闫金龙

钢铁 ›› 2008, Vol. 43 ›› Issue (10) : 47-0.

欢迎访问《钢铁》官方网站!今天是 2025年8月8日 星期五
钢铁 ›› 2008, Vol. 43 ›› Issue (10) : 47-0.
压力加工

一种新型中厚板头部厚度控制方法

  • 孙涛1,杜平1,刘相华1,刘军川2,闫金龙2
作者信息 +

A New Gauge Control Method for Plate Head

  • 孙涛1,杜平1,刘相华1,刘军川2,闫金龙2
Author information +
文章历史 +

摘要

基于中厚板轧制过程中头部厚度超差原因,分析了传统的头部补偿方法的不足之处。在此基础上开发了一种新型头部厚度控制的方法,可以在不同钢种和不同规格的轧制条件下,利用轧制过程实际数据,进行轧件塑性系数计算,自动修正头部沉入量;采用指数型补偿曲线,使钢板切头之后成品厚度尺寸达标并且切头质量减少,提高了产品的成材率。

Abstract

Based on the cause of gauge oversizing of plate head,the traditional head gauge compensation methods were analyzed. A new gauge control method for plate head was developed.For the plates of different steel grade and different dimensions,the plasticity coefficient is calculated, and gauge compensation for plate head is automatically adjusted.Adopting the exponential compensation curve,the gauge deviation is allowable after cropping, and metal yield can be improved.

关键词

中厚板轧制 / 头部补偿 / 厚度控制

Key words

plate rolling / compensation at head / gauge control

图表

引用本文

导出引用
孙涛, 杜平, 刘相华, . 一种新型中厚板头部厚度控制方法[J]. 钢铁, 2008, 43(10): 47-0
SUN Tao, DU Ping, LIU Xianghua, et al. A New Gauge Control Method for Plate Head[J]. Iron and Steel, 2008, 43(10): 47-0

9

Accesses

0

Citation

Detail

段落导航
相关文章

/