大方坯连铸动态轻压下控制模型的开发与应用

祭程 朱苗勇 陈永 吴国荣 杨素波

钢铁 ›› 2009, Vol. 1 ›› Issue (9) : 20-0.

欢迎访问《钢铁》官方网站!今天是 2025年8月2日 星期六
钢铁 ›› 2009, Vol. 1 ›› Issue (9) : 20-0.
炼钢

大方坯连铸动态轻压下控制模型的开发与应用

  • 祭程 朱苗勇 陈永 吴国荣 杨素波
作者信息 +

The Development and Application of Dynamic Soft Reduction Control Model in Bloom Continuous Casting Machine

  • 祭程 朱苗勇 陈永 吴国荣 杨素波
Author information +
文章历史 +

摘要

凝固末端动态轻压下技术是减少甚至消除连铸坯中心偏析与疏松的有效手段。本文以攀钢2号大方坯连铸机为研究对象,研究开发了大方坯动态轻压下控制模型,提出了轻压下实施过程中各拉矫机压下辊设定值的计算方法。模型投产应用后,生产铸坯质量得到较大改善,其中中心偏析、中心疏松等内部缺陷评级≤1.0级综合比例达到99.03%。

Abstract

The dynamic soft reduction technology is the effective method to reduce and even eliminate the centerline looseness and segregation of continuous casting strands. In the present paper, a bloom dynamic soft reduction control model was studied and developed for No.2 bloom continuous casting machine in Panzhihua steel, and the gap values calculation method for the press rolls of withdrawal and straightening machines during the process of soft reduction was presented. The model application results show that quality of the blooms has been improved obviously, and the integrated qualified rate of blooms central segregation and central looseness defects class ≤1.0 is up to 99.03%.

关键词

大方坯连铸 / 动态轻压下 / 控制模型

Key words

bloom continuous casting / dynamic soft reduction / control model

图表

引用本文

导出引用
祭程 朱苗勇 陈永 吴国荣 杨素波. 大方坯连铸动态轻压下控制模型的开发与应用[J]. 钢铁, 2009, 1(9): 20-0
Miaoyong ZHU CHEN Yong Guorong Wu YANG Su-bo. The Development and Application of Dynamic Soft Reduction Control Model in Bloom Continuous Casting Machine[J]. Iron and Steel, 2009, 1(9): 20-0

14

Accesses

0

Citation

Detail

段落导航
相关文章

/