自动板形控制系统包括板形控制软件、硬件及网络配置和检测仪表。作为1580mm热连轧计算机控制系统的一项重要内容，自动板形控制系统的功能包括过程控制系统的板形设定控制及与之相关的板形自学习和基础自动化系统的弯辊力前馈控制、凸度反馈控制及平坦度反馈控制等。在经历基本设计、详细设计、编程调试和模型参数调整后，自动板形控制系统实现了稳定运行，并成功轧制最宽1510mm、最薄1.45mm的带钢产品，轧制单位内带钢凸度和平坦度偏差基本控制在±15μm和±20IU内。

Automatic profile and flatness control system is composed of shape control software, hardware and network configuration and measuring instrument. As one important part of computer control systems of 1580mm hot strip mills, the functions of automatic profile and flatness control system include shape setup control and its correlative shape self-learning in process control system, bending force feedforward control, crown feedback control and flatness feedback control in basic automation system. After the basic design, detail design, programming, debug and adjustment of model parameters, automatic profile and flatness control system run stably. The widest strip with 1510 mm and the thinnest strip with 1.45 mm were produced successfully. The deviations of strip crown and flatness in a rolling unit were less than ±15μm and ±20IU respectively.