焦炉加热系统流量分配的数值仿真

金珂,冯妍卉,张欣欣,王明登,杨俊峰,马小波

钢铁 ›› 2013, Vol. 48 ›› Issue (9) : 16-20.

欢迎访问《钢铁》官方网站!今天是 2025年8月4日 星期一
钢铁 ›› 2013, Vol. 48 ›› Issue (9) : 16-20.
原料与炼铁

焦炉加热系统流量分配的数值仿真

  • 金珂1,冯妍卉1,张欣欣1,王明登2,杨俊峰2,马小波2
作者信息 +

Numerical Analysis on Flow Distribution in Regenerator of Coke Oven Heating System

  • 金珂1,冯妍卉1,张欣欣1,王明登2,杨俊峰2,马小波2
Author information +
文章历史 +

摘要

基于焦炉蓄热室的结构特点以及内部的流动过程,以质量守恒定律和动量守恒定律为基础,建立了焦炉蓄热室的小烟道及斜道区域的三维数理模型。利用数值模拟的方法对模型进行求解,揭示了蓄热室内气体流动的规律,计算出小烟道区域的相对压力分布以及篦子砖出口处和斜道出口处的气体流量分布。研究结果表明:从机侧到蓄热室中心处,相对压力值逐渐增大。在相同规格条件下,靠近蓄热室中心处的篦子砖出口流量偏大。由于结构的对称性,焦侧蓄热室的流量分布规律与机侧蓄热室的规律一致。合理的布置篦子砖规格有利于蓄热室长向加热均匀性。从机侧到焦侧,斜道出口的流量呈逐渐增大的趋势。而两侧炉头因其散热量比较大,故其气体流量较之中部立火道有所增大。

Abstract

According to the structure and process characteristics of regenerator in coking oven, a three dimension mathematical model was built to describe the flowing process in the flue and ramp area, the model was numerical solved and the law of the gas flow in regenerator was revealed, the pressure, flow distribution of the oulet in the flue and ramp area were obtained. The results show that the relative pressure along the length direction of the coking oven increases gradually; when the structure size is the same, the outlet flow of the grate brick which is nearer to the center of regenerator was greater. As the symmetry of the structure, law of the gas flow at the coke side in regenerator is the same as the machine side; it is good for the temperature uniformity along the length direction to adjust the size of grate brick legitimately. From machine to coke side, the gas flow at the outlet of the ramp area is increasing gradually except the furnace end; they are larger than others because of the greater heat dissipation.

关键词

焦炉 / 蓄热室 / 小烟道 / 斜道 / 数值模拟

Key words

regenerator / coking oven / flue / ramp area / numerical simulation

图表

引用本文

导出引用
金珂, 冯妍卉, 张欣欣. 焦炉加热系统流量分配的数值仿真[J]. 钢铁, 2013, 48(9): 16-20
JIN Ke, FENG Yan-Hui, ZHANG Xin-Xin. Numerical Analysis on Flow Distribution in Regenerator of Coke Oven Heating System[J]. Iron and Steel, 2013, 48(9): 16-20
中图分类号: Regenerator    Coking oven    Flue    Ramp area    Numerical simulation   

参考文献

[1]田代清等. Computer Analysis of Heat Transfre in Coke Oven. 富士制铁技报,1969,(8): 31~43.
[2]Zhancheng Guo,Huiqing Tang. Numerical simulation for a process analysis of a coke oven. China Particuology,6(3),2005:373-378.
[3]陈鸿复,皮?杰?雷特霍夫,杰?克?布雷麻昆布.焦炉燃烧室物理模型[J] .北京科技大学学报,1982,(03).
[4]Peter V.Barr,et al, A heat-transfer model of the tall coke-oven flue. Ironmaking Conference Proceedings,1987:283~297.
[5]金珂,冯妍卉,张欣欣等. 耦合燃烧室的焦炉炭化室内热过程的数值分析. 化工学报. 63 (3), 2012: 788-795.
[6]张安强, 冯妍卉, 张欣欣等. 焦炉燃烧室-炭化室热过程数值模拟及解耦算法, 化工学报, 63 (2), 2012: 455-462.
[7]杨先亮,吕玉坤,叶学民.并联管路特性及流量分配综合实验系统. 实验室研究究与探索,2008,27(9):38-40.
[8]朱玉琴. 并联管组流量分配规律的研究. 节能,2006,2:5-7.
[9]钟贤和,张力,伍成波. 较大流量多支管流量分配实验与数值模拟. 重庆大学学报,2006,29(1):41-44.
[10]徐建军,陈炳德,王小军.入口流量分配对矩形窄缝多通道流动交混的影响,核科学与工程,2008,28(1):51-55.
[11]张伟. 流量分配管模型的建立与求解,节能,2005,12:19-22.
[12]吴冕,胡寿根,赵军等. Y型分支管道气固两相流动流量分配特性研究,能源研究与信息,2008,24(1):44-48.
[13]段广彬,胡寿根,赵军等. 气固两相Y型分支管网流量分配特性的试验研究与数值模拟,热能动力工程,2009,24(6):750-755
[14]申敬罡,赵军,段广彬等. 变角度Y型分支管气力输送流量分配特性研究,力学季刊,2009,30(2):347-350.
[15]姚昭章,郑明东.炼焦学[M].北京:冶金工业出版社,2008.

基金

国家高技术研究发展计划

8

Accesses

0

Citation

Detail

段落导航
相关文章

/