High temperature mechanical property of SS400 B-bearing steel slab

YU Wei; ZHOU Lv-Min; XIONG Li; XUE Zheng-Liang

doi:10.13228/j.boyuan.issn0449-749x.20140608

Welcome to visit Iron and Steel, July 23, 2025

“中国科技期刊卓越行动计划二期”中文领军期刊
中国精品科技期刊顶尖学术论文(F5000)
《科技期刊世界影响力指数(WJCI)报告》
《冶金工程技术与金属材料（金属学与金属工艺）
领域科技期刊分级目录》T1级别

中文核心期刊
中国科技核心期刊
中国科学引文数据库来源期刊
中文科技期刊数据库收录期刊
中国学术期刊文摘收录期刊

EI数据库收录期刊
SCOPUS数据库收录期刊
美国《金属文摘》收录期刊
美国《剑桥科学文摘》收录期刊
美国《化学文摘》收录期刊
日本科学技术文献速报收录期刊

Iron and Steel ›› 2015, Vol. 50 ›› Issue (7) : 38-42. DOI: 10.13228/j.boyuan.issn0449-749x.20140608

High temperature mechanical property of SS400 B-bearing steel slab

Author information +

History +

Abstract

In order to avoid and reduce surface cracks of SS400 B-bearing steel slab， the high temperature mechanical properties of SS400 B-bearing steel slab have been investigated in the temperature range of 650-1 350 ℃ by the hot tensile test technique with Gleeble-1500 system. The results showed that its yield strength and tensile strength in the temperature range were relatively small；in general，which decreased with increased tested temperature. Only in the range of 1000-1 100 ℃，SS400 B-bearing steel slab has good hot ductility and the reductions of area were higher than 90%. The third brittle zone of the SS400 B-bearing steel is between 700-950 ℃. The low plasticity temperature range is relatively wide，because of boron segregation in grain boundaries and precipitation of BN leading to the grain boundary embrittlement. Because of the remelting phenomenon of B-bearing steel，the plasticity can be reduced when the temperature lies between 1 150-1 250 ℃.

Key words

B-bearing steel / high temperature strength / hot ductility / reduction of area / continuous cast

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

YU Wei, ZHOU Lv-Min, XIONG Li, et al. High temperature mechanical property of SS400 B-bearing steel slab[J]. Iron and Steel, 2015, 50(7): 38-42 https://doi.org/10.13228/j.boyuan.issn0449-749x.20140608

References

[1]王朝阳, 祭程, 巩文旭, 朱苗勇.含硼钢板坯边角裂纹的成因与控制[J].钢铁, 2012, 47(5):35-38
[2]田树生, 易耀云, 杨勇.含硼钢裂纹成因分析及改进[J].金属材料与冶金工程, 2010, 38(5):36-38
[3]褚幼义, 贺信莱, 余宗森, 欧宇光.低合金铸钢中硼的分布[J].金属学报, 1980, 16(4):380-390
[4]刘国梁, 季晨曦, 倪有金, 胡卫东, 张颖华, 包春林.含硼钢板坯角横裂产生原因及控制研究[J].钢铁钒钛, 2013, 34(4):94-98
[5]Zhang D, Shintaku Y, Suzuki S, Komizo Y.In Situ Observation of Phase Transformation in Low-Carbon,Boron-Treated Steels[J].Metallurgical and Materials Transactions A, 2012, 43(2):447-458
[6]Cho K C, Mun D J, Kim J Y.Effect of Boron Precipitation Behavior on the Hot Ductility of Boron Containing Steel[J].Metallurgical and Materials Transactions A, 2010, 41(6):1421-1428
[7]Cho K C, Mun D J, Kang M H, Lee J S, Pank J K, Koo Y M.Effect of Thermal Cycle and Nitrogen Content on the Hot Ductility of Boron-bearing Steel[J].ISIJ International, 2010, 50(6):839-846
[8] Childs W J, Wilber G A.The Effects of Thermal History and Composition on the Hot Ductility of Low Carbon Steel[J].Metallurgical and Materials Transactions A, 1975, 6:1727-1735
[9] Adams C J.Open Hearth and Basic Oxygen Steel [C]// Proceedings 49th National Chicago Meeting. Chicago: 1966.
[10] 张明如.连铸坯的组织与高温力学性能[J].马钢科技, 1996, 2:31-34
[11]Yin H, Blazek K, Lanzi O.In-situ” Observation of Remelting Phenomenon after Solidification of Fe–B Alloy and B-bearing Commercial Steels[J].ISIJ International, 2009, 49(10):1561-1567
[12]朱光立, 略文刚.轴承钢高温力学性能的研究[J].特殊钢, 2007, 28(4):45-48
[13]吴光亮, 孙彦辉, 周春泉, 蔡开科, 李正邦.板坯高温力学性能试验研究[J].钢铁, 2006, 41(5):25-28
[14] 蔡开科, 程士富.连续铸钢原理与应用[M]. 北京: 冶金工艺出版社, 1994.
[15]Suzuki H G, Nishimura S, Yamaguchi S.Characteristics of Embrittlement in Steels above 600℃[J].Tetsu-to-Hagane, 1979, 65(14):2038-
[16]Suzuki H G, Nishimura S, Imamura J.Hot Ductility in the Temperature Range between 900 and 600℃[J].Tetsu-to-Hagane, 1981, 67(8):1180-