[1] Brimacombe J,Sorimachi K. Crack formation in the continuous casting of steel[J]. Metallurgical Transactions:B,1977,8(2):489.
[2] Brimacombe J. The challenge of quality in continuous casting processes[J]. Metallurgical and Materials Transactions:A,1999,30(8):1899.
[3] 陈亮,宋波,陈天明,等. 45钢连铸大方坯中心疏松与缩孔控制[J]. 钢铁, 2018, 53(8): 49.(CHEN Liang,SONG Bo,CHEN Tian-ming,et al. Control countermeasures of center porosity and shrinkage in 45 steel continuous casting bloom[J]. Iron and Steel, 2018, 53(8): 49.)
[4] 刘亮. 奥钢联板坯铸机驱动力报警问题的分析及改进[J]. 中国冶金, 2019, 29(1): 52. (LIU Liang. Analysis and improvement of driving force alarm of slab caster of Voestalpine[J]. China Metallurgy, 2019, 29(1): 52.)
[5] 王璐,孙彦辉,焦帅,等. 轴承钢大方坯二次枝晶臂间距数值模拟[J]. 钢铁, 2018, 53(7): 50. (WANG Lu,SUN Yan-hui,JIAO Shuai,et al. Numerical simulation of secondary dendrite arm spacing of bearing steel bloom[J]. Iron and Steel, 2018, 53(7): 50.)
[6] 刘青,王良周,曹立国,等. 连铸二次冷却研究的进展[J]. 钢铁研究学报,2005,17(6):6. (LIU Qing,WANG Liang-zhou,CAO Li-guo,et al. Evolution of research on scondary cooling in continuous casting process[J]. Journal of Iron and Steel Research,2005,17(6):6.)
[7] 朱苗勇. 新一代高效连铸技术发展思考[J]. 钢铁, 2019, 54(8): 21.(ZHU Miao-yong. Some considerations for new generation of high-efficiency continuous casting technology development[J]. Iron and Steel, 2019, 54(8): 21.)
[8] 朱国森,季晨曦,刘洋,等. 首钢板坯连铸技术进步[J]. 中国冶金, 2019, 29(8): 1.(ZHU Guo-sen,JI Chen-xi,LIU Yang,et al. Progresses of continuous casting technology development at Shougang Group[J]. China Metallurgy, 2019, 29(8): 1.)
[9] Louhenkilpi S. Study of heat transfer in a continuous billet casting machine[J]. Scandinavian Journal of Metallurgy,1994,23(1):9.
[10] 吴炼,张炯明,刘志明,等. 小方坯连铸末端电磁搅拌综合控制模型[J]. 钢铁研究学报,2013,25(2): 14. (WU Lian,ZHANG Jiong-ming,LIU Zhi-ming,et al. Collective control model of final electromagnetic stirring in billet continuous casting[J]. Journal of Iron and Steel Research,2013,25(2):14.)
[11] 胡亮,郭红民,段少平. 凝固末端电磁搅拌对82B碳偏析的影响[J]. 中国冶金, 2018, 28(9): 63. (HU Liang,GUO Hong-min,DUAN Shao-ping. Effect of F-EMS on carbon segregation of 82B[J]. China Metallurgy, 2018, 28(9):63.)
[12] 王璞,李少翔,陈列,等. 电磁搅拌对大圆坯结晶器冶金行为影响的探讨[J]. 钢铁, 2019, 54(8): 82.(WANG Pu,LI Shao-xiang,CHEN Lie,et al. Investigation of mold metallurgical behavior under electromagnetic stirring for round bloom[J]. Iron and Steel, 2019, 54(8): 82.)
[13] 王国新,张家泉,王玉昌,等. 大方坯连铸动态二冷与动态轻压下控制模型的开发与应用[J]. 系统仿真学报,2009,21(8):2453.(WANG Guo-xin,ZHANG Jia-quan,WANG Yu-chang,et al. Development and application of dynamic sencondary cooling and dynamic soft reduction control model for bloom caster[J]. Journal of System Simulation,2009,21(8):2453.)
[14] 区洪辉. 大方坯凸辊轻压下试验[J]. 中国冶金, 2019, 29(5): 70.(OU Hong-hui. Trial of soft reduction on bloom with convex roller[J]. China Metallurgy, 2019, 29(5): 70.)
[15] 赵军普,刘浏,饶金元. 凝固压下对大方坯中心致密性的影响[J].钢铁, 2018, 53(9): 30.(ZHAO Jun-pu,LIU Liu,RAO Jin-yuan. Effect of solidification reduction process on center compactness of continuous casting bloom[J]. Iron and Steel, 2018, 53(9): 30.)
[16] JI C,WU C H,ZHU M Y. Thermo-mechanical behavior of the continuous casting bloom in the heavy reduction process[J]. JOM,2016,68(12):3107.
[17] 任树洋,尹绍江,李行,等. 新一代中厚板制造关键技术在唐钢的应用[J]. 中国冶金, 2019, 29(9): 60.(REN Shu-yang,YIN Shao-jiang,LI Hang,et al. Application of new generation key technology of medium and heavy plate manufacturing in Tangsteel[J]. China Metallurgy, 2019, 29(9): 60.)
[18] 吴国庆,邱明罡,代宗岭,等. 现代合金钢大方坯连铸机设计特点及生产实践[J].钢铁, 2018, 53(12): 54.(WU Guo-qing,QIU Ming-gang,DAI Zong-ling,et al. Design features and production practice of modern alloy steel bloom caster[J]. Iron and Steel, 2018, 53(12): 54.)
[19] 郭剑波,梁爱生,荣亮,等. 带液芯控制的板坯连铸二冷区动态控制模型[J]. 钢铁,1997,32(6):29. (GUO Jian-bo,LIANG Ai-sheng,RONG Liang,et al. Dynamic control model of the secondary cooling zone with crater control for a slab caster[J]. Iron and Steel,1997,32(6):29.)
[20] Spitzer K H,Harste H,Weber B,et al. Mathematical model for thermal tracking and on-line control in continuous casting [J]. ISIJ International,1992,32(7):848.
[21] Okuno K,Naruwa H,Kuribayashi T,et al. Dynamic spray cooling control system for continuous casting[J]. Iron Steel Eng,1987,64(4):34.
[22] 赵克文,赵代琼,伍兵,等. 高效板坯连铸铸机的二冷技术[J]. 钢铁钒钛,1999(2):1. (ZHAO Ke-wen,ZHAO Dai-qiong,WU Bing,et al. Secondary cooling technology of high efficient slab continous casting machine[J]. Iron Steel Vanadium Titanium,1999(2):1.)
[23] Inazaki K,Takahashi M,Chida Y,et al. Computer control system for CC-DR process[J]. Transactions of the Iron and Steel Institute of Japan,1984,24(1):75.
[24] 刘青,田乃媛,徐幸天,等. 矩形坯连铸机二次冷却的在线控制[J]. 冶金自动化,1997(2):9. (LIU Qing,TIAN Nai-yuan,XU Xing-tian,et al. Secondary cooling on-line contrlo of rectangular billet continuous casting[J]. Metallugical Industry Automation,1997(2):9.)
[25] 陈登福,冯科,廖建云,等. 方坯高效连铸凝固冷却的研究[J]. 炼钢,2001,17(4):47. (CHEN Deng-fu,FENG Ke,LIAO Jian-yun,et al. Study on solidification process of high efficiency billet continuous casting[J]. Steelmaking,2001,17(4):47.)
[26] Lally B,Biegler L,Henein H. Finite difference heat-transfer modeling for continuous casting[J]. Metallurgical Transactions:B,1990,21(4):761.
[27] Camporredondo S J,Castillejos E A,Acosta G F,et al. Analysis of thin-slab casting by the compact-strip process:Part I. Heat extraction and solidification[J]. Metallurgical and Materials Transactions:B,2004,35:541.
[28] 杨吉春,蔡开科. 连铸二冷区喷雾冷却特性研究[J]. 钢铁,1990,25(2):9. (YANG Ji-chun,CAI Kai-ke. Experimental investigation of spray cooling characteristics for continuous casting[J]. Iron and Steel,1990,25(2):9.)
[29] Teshima T,Kitagawa T,Miyahara S,et al. The secondary cooling technology of continuous casting for production of high temperature and high quality slab[J]. Tetsu-to-Hagané,1988,74(7):1282.
[30] Bernardin J D,Mudawar I. Film boiling heat transfer of droplet streams and sprays[J]. International Journal of Heat and Mass Transfer,1997,40(11):2579.
[31] JIA W,QIU H H. Experimental investigation of droplet dynamics and heat transfer in spray cooling[J]. Experimental Thermal and Fluid Science,2003,27(7):829.
[32] 张克强,田乃嫒. 连铸用气-水雾化喷嘴的传热特性[J]. 北京科技大学学报,1991,13(4(I)):37. (ZHANG Ke-qiang,TIAN Nai-yuan. Characteristic of heat transfer on an air-mist nozzle in continuous casting[J]. Journal of University of Science and Technology Beijing,1991,13(4(I)):37.)
[33] Muller H,Jeschar R. Investigation of heat transfer in a simulated secondary cooling zone in the continuous casting process[J]. Arch Eisenhuttenwesen,1973,44(8):589.
[34] Nozaki T,Matsuno J,Murata K,et al. A secondary cooling pattern for preventing surface cracks of continuous casting slab[J]. Tetsu-to-Hagane,1978,18(6):330.
[35] Diener A,Drastik A. Heat exchange between strands and guide rollers in the secondary cooling zone of a slab continuous casting machine[J]. Archiv für das Eisenhüttenwesen,1982,53(1):13.
[36] 陈登福,颜广庭. 连铸二冷区的夹辊与铸坯间传热研究[J]. 炼钢,1991(1):39. (CHEN Deng-fu,YAN Guang-ting. Study on heat transfer between pinch roll and the strand in secondary cooling zone of continuous casting[J]. Steelmaking,1991(1):39)
[37] Perkins A,Brooks M,Haleem R. Roll performance in continuous slab casting machines[J]. Continuous Casting,1985(12):267.
[38] 颜广庭,陈登福. 55SiMnVB 钢方坯连铸二冷区凝固的最佳工艺制度控制模型[J]. 钢铁研究学报,1990,2(3):23. (YAN Guang-ting,CHEN Deng-fu. Optimum process control model for the continuous billet solidification of steel 55 SiMnVB in secondary cooling zone[J]. Journal of Iron and Steel Research,1990,2(3):23.)
[39] Ha J,Cho J,Lee B,et al. Numerical analysis of secondary cooling and bulging in the continuous casting of slabs[J]. Journal of Materials Processing Technology,2001,113(1/2/3):257.
[40] 陈登福. 薄板连铸坯的温度与应力状态的研究[D]. 重庆:重庆大学,1997. (CHEN Deng-fu. Study on the Temperature and Stress State of Thin Slab in Continuous Casting[D]. Chongqing:Chongqing University,1997.)
[41] Hardin R A,Liu K,Beckermann C,et al. A transient simulation and dynamic spray cooling control model for continuous steel casting[J]. Metallurgical and Materials Transactions:B,2003,34(3):297.
[42] ZHANG J,CHEN D F,ZHANG C Q,et al. Effects of an even secondary cooling mode on the temperature and stress fields of round billet continuous casting steel[J]. Journal of Materials Processing Technology,2015,222:315.
[43] ZHANG J,CHEN D F,WANG S,et al. Compensation control model of superheat and cooling water temperature for secondary cooling of continuous casting[J]. Steel Research International,2011,82(3):213.
[44] LONG M J,CHEN D F. Study on mitigating center macro-segregation during steel continuous casting process[J]. Steel Research International,2011,82(7):847.
[45] 潘艳华. 中高碳钢方坯连铸二次冷却技术的研究[D]. 重庆:重庆大学,2005. (PAN Yan-hua. Study on Secondary Cooling Technology of Medium and High Carbon Steel Billet Continuous Casting[D]. Chongqing:Chongqing University,2005.)
[46] CHEN D F,LI H,NIU H,et al. New model for spraying water of nozzles in secondary cooling of billet continuous casting[J]. Journal of Chongqing University: Natural Science,2007,30(6):61.
[47] 松野淳一,中戸参,大井浩. スラブの連続鋳造における凝固速度と表面温度の解析[J]. 鐵と鋼:日本鐡鋼協會々誌,1974,60(7):1023.
[48] ZHANG J,CHEN D F,ZHANG C Q,et al. Dynamic spray cooling control model based on the tracking of velocity and superheat for the continuous casting steel[J]. Journal of Materials Processing Technology,2016,229:651.
[49] 陈素琼,蔡开科. 板坯连铸机二次冷却水的控制模型[J]. 炼钢,1994(4):30. (CHEN Su-qiong,CAI Kai-ke. Contral model for secondary cooling zone of slab concaster[J]. Steelmaking,1994(4):30.)
[50] Tsubakihara O,Kameyama K,Takahama H,et al. Method for Cooling Continuous Casting:U.S. Patent 4424855[P]. 1984-1-10. https://patents.glgoo.top/patent/US4424855A/en.
[51] Jiang G,Boyle J. Computer dynamic control of the secondary cooling during continuous casting[C]//1993 Conference on Continuous Casting of Steel in Developing Countries. BeiJing:[s.n.],1993.
[52] 刘坤,冯亮花,赵连刚,等. 板坯连铸机二冷段的动态控制模型[J]. 钢铁研究学报,2005,17(2):75. (LIU Kun,FENG Liang-hua,ZHAO Lian-gang,et al. Dynamic control model for secondary cooling zone of slab caster[J]. Journal of Iron and Steel Research,2005,17(2):75.)
[53] 肖亚明. 我国钢结构建筑的发展现状及前景[J]. 合肥工业大学学报:自然科学版,2003,26(1):111. (XIAO Ya-ming. Present situation and outlook of steel construction building in China[J]. Journal of Hefei University of Technology: Natural Science,2003,26(1):111.)
[54] 梁爱生,曹晓兵. 连铸坯二冷区目标温度曲线的确定[J]. 重型机械,1999(2):35. (LIANG Ai-sheng,CAO Xiao-bing. Determination of objective temperature curves in secondary cooling zone of continuous casting billets[J]. Heavy Machinery,1999(2):35.)
[55] Hills A. Simplified theoretical treatment for transfer of heat in continuous-casting machine moulds[J]. Journal of the Iron and Steel Institute,1965,203:18.
[56] Mizikar E A. Mathematical heat transfer model for solidification of continuously cast steel slabs[J]. Trans TMS-AIME,1967,239(11):1747.
[57] Pehlke R D. Computer simulation of solidification processes-the evolution of a technology[J]. Metallurgical and Materials Transactions:A,2002,33(8):2251.
[58] Louhenkilpi S,Laitinen E,Nieminen R. Real-time simulation of heat transfer in continuous casting[J]. Metallurgical Transactions:B,1993,24(4):685.
[59] Kondo O,Hamada K,Kuribayashi T,et al. New dynamic spray control system for secondary cooling zone of continuous casting machine[C]//76 th Steelmaking Conference. Dallas:[s.n.],1993.
[60] 蔡开科,吴元增. 连续铸锭板坯凝固传热数学模型[J]. 金属学报,1983,19(1):115. (CAI Kai-ke,WU Yuan-zeng. Mathematical model of heat transfer in solidification of continuous ingot slab[J]. Acta Metallurgica Sinica,1983,19(1):115.)
[61] 陈登福,潘艳华,龙木军. 二次冷却通用仿真软件在方坯连铸中的应用[J]. 铸造,2006,55(2):140. (CHEN Deng-fu,PAN Yan-hua,LONG Mu-jun. The numerical simulation software applied in continuous casting billets[J]. Foundry,2006,55(2):140.)
[62] Parfenov E,Smirnov A,Koshkin A,et al. Dynamic secondary cooling system for a continuous caster[J]. Metallurgist,1999,43(11):510.
[63] Morwald K,Dittenberger K,Ives K. Dynacs cooling system-features and operational results[J]. Ironmaking and Steelmaking,1998,25(4):323.
[64] Pennerstorfer P,Hrazdera G,Schulz O. 确保灵活和可靠生产的高性能板坯连铸机[C]//2011年第九届全国连铸学术会议论文集. 珠海:中国金属学会,2011:213. (Pennerstorfer P,Hrazdera G,Schulz O. High performance slab casting machines for flexible and reliable production[C]// Papers Collection of the Ninth National Academic Conference on Continuous Casting in 2011. Zhuhai:The Chinese Society for Metals,2011:213.)
[65] 祭程,朱苗勇,程乃良. 板坯连铸机动态轻压下过程控制系统的研究与实现[J]. 冶金自动化,2007,31(1):51.(JI Cheng,ZHU Miao-yong,CHENG Nai-liang. Design and realization of dynamic soft reduction process control system for slab continuous casting machine[J]. Metallurgical Industry Automation,2007,31(1):51)
[66] 龙木军. 板坯连铸二冷动态轻压下辊缝收缩模型研究及软件开发[D]. 重庆:重庆大学,2007. (LONG Mu-jun. Study on Roll Gap Shrinking Model of Dynamic Soft Reduction for Slab and its Software Development[D]. Chongqing:Chongqing University,2007.)
[67] Aboutalebi M R,Hasan M,Guthrie R. Coupled turbulent flow,heat,and solute transport in continuous casting processes[J]. Metallurgical and Materials Transactions B,1995,26(4):731.
[68] 张琳.首钢板坯连铸二冷水动态控制的模型建立与实现[D]. 沈阳:东北大学,2008. (ZHANG Lin. Shougang Slab Continuous Casting Cold Water on the Dynamic Control of the Establishment and Implantation of Model[D]. Shenyang:Northeastern University,2008.)
[69] 金俊泽,郑贤淑,郭可讱,等. 连铸钢坯凝固进程的数值模拟[J]. 钢铁,1985,20(5):19. (JIN Jun-ze,ZHENG Xian-shu,GUO Ke-ren,et al. Computer simulation of the solidification in billet continuous casting[J]. Iron and Steel,1985,20(5):19.)
[70] KONG Y W,CHEN D F,LIU Q,et al. Research on the on-Line simulation of a three-dimensional temperature field model of slab continuous casting[J]. Steel Research International,2018,89(8):1800091.
[71] Petrus B,Zheng K,Zhou X,et al. Real-time,model-based spray-cooling control system for steel continuous casting[J]. Metallurgical and Materials Transactions B,2011,42(1):87.
[72] Camisani-Calzolari F R,Craig I K,Pistorius P C. Speed disturbance compenation in the secondary cooling zone in continuous casting[J]. ISIJ International,2000,40(5):469.
[73] Thomas B G,Behera A K,Bentsman J,et al. Online dynamic control of cooling in continuous casting of thin steel slabs[C]//Proceedings of NSF Grant Conference. St. Louis,Missouri:[s.n.],2006.
[74] LIU W H,XIE Z,JI Z P,et al. Dynamic water modeling and application of billet continuous casting[J]. Journal of Iron and Steel Research,International,2008,15(2):14.
[75] 高文星. 水雾介质对连铸坯表面测温的影响及测温方法研究[D]. 重庆:重庆大学,2008. (GAO Wen-xin. Study on Influence of Water Media on Surface Temperature of Casting Slab and Method of Temperature Measurement[D]. Chongqing:Chongqing University,2008.)
[76] LONG M J,CHEN D F,ZHANG J,et al. Novel online temperature control system with closed feedback loop for steel continuous casting[J]. Ironmaking and Steelmaking,2011,38(8):620.