[1] 孙卿卿,仲红刚,曹欣,等. 节约型双相不锈钢性能与研究状况 [J]. 上海金属,2012,34(4):38.(SUN Qing-qing,ZHONG Hong-gang,CAO Xin,et al. Status on production and research of lean duplex stainless steel[J]. Shanghai Metals,2012,34(4):38.)
[2] 刘国平. 节约型双相不锈钢组织演变规律的研究进展[J]. 中国冶金,2017,27(3):1.(LIU Guo-ping. Research progress on microstructure evolution of lean duplex stainless steel[J]. China Metallurgy,2017,27(3):1.)
[3] 侯雨阳, 成国光. 铁素体不锈钢铸坯凝固特性及等轴晶率控制[J]. 连铸, 2021 (3): 7. (HOU Yu-yang, CHENG Guo-guang. Solidification characteristics and control measures of equiaxed zone ratio of ferritic stainless steel slab[J].Continuous Casting, 2021 (3): 7.)
[4] 王胜利.超级马氏体不锈钢成分、工艺和腐蚀性能的研究进展[J].连铸,2019 (3):23.(WANG Sheng-li. Research progress on composition,process and corrosion properties of super martensitic stainless steels[J]. Continuous Casting, 2019 (3):23.)
[5] 李璟宇,成国光,陈兴润,等.含钛超纯铁素体不锈钢水口结瘤机制研究[J].连铸,2019 (2):44.(LI Jing-yu, CHENG Guo-guang, CHEN Xing-run,et al.The formation mechanism of the clogging of submerged entry nozzle of Ti-bearing ultra pure ferrite stainless steel[J]. Continuous Casting, 2019 (2):44.)
[6] 吴玖. 00Cr18Ni5Mo3Si2双相不锈钢的性能与应用[J]. 钢铁,1985,20(12):40.(WU Jiu. Properties and application of 00Cr18 Ni5Mo3Si2 dual-phase stainless steel[J]. Iron and Steel,1985,20(12):40.)
[7] 吴玖. 钢铁研究总院开发了炼油、化工和石油化工用双相不锈钢[J]. 钢铁,1989,24(4):53.(WU Jiu. General iron and steel research institute developed a variety of dual phase stainless steels for oil refinerypetrol-chemical industries[J]. Iron and Steel,1989,24(4):53.)
[8] 乔晓燕,赖承班,陈卓,等.奥氏体化工艺对30Cr13钢淬火后的组织和硬度的影响[J].上海金属,2021,43(5):33.(QIAO Xiao-yan, LAI Cheng-ban, CHEN Zhuo,et al. Effect of austenitizing process on microstructure and hardness of 30Cr13 steel after quenching[J]. Shanghai Metal, 2021,43(5):33.)
[9] 翁建寅,彭伟,宁小智,等.高氮无镍奥氏体不锈钢的激光辐照组织[J].上海金属,2020,42(3):21.(WENG Jian-yin,PENG Wei, NING Xiao-zhi, et al. Microstructrue of high-nitrogen nickel-free austenitic stainless steel irradiated by laser[J]. Shanghai Metal, 2020,42(3):21.)
[10] Herrera C,Ponge D,Raabe D. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability[J]. Acta Materialia,2011,59:4653.
[11] Choi J Y,Ji J H,Hwang S W,et al. TRIP aided deformation of a near-Ni-free, Mn-N bearing duplex stainless steel[J]. Materials Science and Engineering: A,2012,535:32.
[12] ZHANG W,HU J. Effect of annealing temperature on transformation induced plasticity effect of a lean duplex stainless steel [J]. Materials Characterization,2013,79:37.
[13] GUO B F,ZHANG Q F,CHEN L,et al. Influence of annealing temperature on the strain-hardening behavior of a lean duplex stainless steel[J]. Materials Science and Engineering: A,2018,722:216.
[14] 陈雷, 李飞, 张英杰,等. 一种TRIP/TWIP型双相不锈钢的相图及其亚稳奥氏体组织稳定性计算[J]. 燕山大学学报,2016(40):35 (CHEN Lei, LI Fei, ZHANG Ying-jie, et al. Calculation for the phase diagram and stability of metastable austenite in a TRIP/TWIP duplex stainless steel[J]. Jouranl of Yanshan University,2016(40): 35.)
[15] Choi J Y,Ji J H,Hwang S W,et al. Effects of nitrogen content on TRIP of Fe-20Cr-5Mn-xN duplex stainless steel[J]. Materials Science and Engineering: A,2012,534:673.
[16] Tsuchida N,Yamaguchi Y,Morimoto Y,et al. Effects of temperature and strain rate on TRIP effect in SUS301L metastable austenitic stainless steel[J]. ISIJ International,2013,53(10):1881.
[17] 陈雷, 郝硕, 梅瑞雪,等. 节约型双相不锈钢TRIP效应致塑性增量及其固溶温度依赖性 [J]. 金属学报,2019, 55(11):1359.(CHEN Lei,HAO Shou,MEI Rei-xue,et al. Intrinsic increment of plasticity induced by TRIP and its dependence on the annealing temperature in a lean duplex stainless steel[J]. Acta Metallurgica Sinica,2019,55(11):1359.)
[18] Lechartier A,Meyer N,Estevez R,et al. Deformation behavior of lean duplex stainless steels with strain induced martensitic transformation: Role of deformation mechanisms, alloy chemistry and predeformation[J]. Materialia,2019,5:100190.
[19] PENG J,LI K S,PEI J F,et al. The effect of pre-strain on tensile behaviour of 316L austenitic stainless steel[J]. Materials Science and Technology,2018,34(5):547.
[20] PENG J,LI K S,DAI Q,et al. Mechanical properties of pre-strained austenitic stainless steel from the view of energy density[J]. Results in Physics,2018,10:187.
[21] LI S H,DAN W J,ZHANG W G,et al. A model for strain-induced martensitic transformation of TRIP steel with pre-strain[J]. Computational Materials Science,2008, 40(2):292.
[22] 徐勇, 张士宏, 程明,等. 加载方式对奥氏体不锈钢力学性能和马氏体相变的影响 [J]. 金属学报,2013,49(7):775. (XU Yong,ZHANG Shi-hong,CHENG Ming,et al. Effect of loading modes on mechanical property and strain induced martensite transformation of austenitic stainless steels[J]. Acta Metallurgica Sinica,2013,49(7):775.)
[23] Joshua A L,Chester J V T,Martin C M. Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel[J]. Metallurgical and Materials Transactions:A,2006,37(1):147.
[24] Dieter G E. Mechanical Metallurgy[M]. New York: McGraw Hill Book Company,1988.
[25] Talonen J,Aspegren P,Hnninen H. Comparison of different methods for measuring strain induced α'-martensite content in austenitic steels[J]. Materials Science and Technology,2004,20(12):1506.
[26] 陈雷,张英杰,李飞,等. 固溶温度对节约型双相不锈钢TRIP/TWIP行为的影响[J]. 钢铁,2017,52(4):55.(CHEN Lei,ZHANG Ying-jie,LI Fei,et al. Effect of solution temperature on the TRIP+TWIP behavior of the lean duplex stainless steel[J]. Iron and Steel,2017,52(4):55.)
[27] Choi J Y,Ji J H,Hwang S W,et al. Strain induced martensitic transformation of Fe-20Cr-5Mn-0.2Ni duplex stainless steel during cold rolling:Effects of nitrogen addition[J]. Materials Science and Engineering: A,2011,528(18):6012.
[28] 胡汉江,赵爱民,印珠凯,等. 预应变对TRIP钢力学性能及硬化行为的影响 [J]. 材料热处理学报,2016,37(5):128. (HU Han-jiang,ZHAO Ai-min,YIN Zhu-kai,et al. Effect of pre-strain on mechanical properties and hardening behavior of TRIP steel[J]. Journal of Materials Heat Treatment,2016,37(5):128.)
[29] LI X F,LI J J,DING W,et al. Stress relaxation in tensile deformation of 304 stainless steel[J]. Journal of Materials Engineering and Performance,2017,26(2):630.
[30] LIU H P,LIU B,BAI P K,et al. Martensitic transformation and fractographic analysis of lean duplex stainless steel during low temperature tension deformation[J]. Materials Characterization,2015,107:262.
[31] Wibowo F,Zulfi F R,Korda A,et al. Effect of tensile pre-strain at different orientation on martensitic transformation and mechanical properties of 316L stainless steel[J]. AIP Conference Proceedings,2017,1805(1):1.
[32] Breedis J F. Influence of dislocation substructure on the martensitic transformation in stainless steel[J]. Acta Metallurgica,1965,13(3):239.
[33] ZHAO Y,WANGY,LI X,et al. Effects of plastic straining on the corrosion resistance of TRIP-aided lean duplex stainless steels[J]. Journal of Materials Science,2018,53(12):9258.
[34] XU Y,ZHANG S H,CHENG M,et al. In situ X-ray diffraction study of martensitic transformation in austenitic stainless steel during cyclic tensile loading and unloading[J]. Scripta Materialia,2012,67(9):771.
[35] Spencer K K,Véron M,Zhang Y,et al. The strain induced martensite transformation in austenitic stainless steels Part 1-influence of temperature and strain history[J]. Materials Science and Technology,2009,25(1):7.
[36] XU Y,ZHANG S H,SONG H W,et al. The enhancement of transformation induced plasticity effect on austenitic stainless steels by cyclic tensile loading and unloading[J]. Materials Letters,2011,65(11):1545.
[37] 金淼, 李文权, 郝硕,等. 固溶温度对Mn-N型双相不锈钢拉伸变形行为的影响 [J]. 金属学报,2019,55(4):436.(JIN Miao,LI Wen-quan,HAO Shuo,et al. Effect of solution temperature on tensile deformation behavior of Mn-N bearing duplex stainless steel[J]. Acta Metallurgica Sinica,2019,55(4):436.)
[38] 马筱聪,安子军,陈雷,等. 加载方向对TRIP双相不锈钢板带拉伸性能的影响[J]. 钢铁,2020,55(2):112.(MA Xiao-cong,AN Zi-jun,CHEN Lei,et al. Influence of loading direction on tensile properties of a TRIP-assisted duplex stainless steel sheet[J]. Iron and Steel,2020,55(2):112.)