铸轧高磷耐候钢薄带低温冲击韧性

周国平 王彬 陈 俊 刘振宇 邱以清 王国栋

物理测试 ›› 2010, Vol. 28 ›› Issue (2) : 10-10.

物理测试 ›› 2010, Vol. 28 ›› Issue (2) : 10-10.
试验研究

铸轧高磷耐候钢薄带低温冲击韧性

  • 周国平 王彬 陈 俊 刘振宇 邱以清 王国栋
作者信息 +

Low Temperature Impacting Ductility for High Phosphorous Steel Cast Strip

  • 周国平 王彬 陈 俊 刘振宇 邱以清 王国栋
Author information +
文章历史 +

摘要

本文给出了一种非标准试样的低温冲击试验方法。采用有限元法计算了0.8mm薄带钢低温冲击试验中的温升,校正了冲击时刻试样的温度。采用本文的薄带低温冲击试验方法对比研究铸轧高磷耐候钢薄带和常规薄带非标准试样的冲击韧性。结果发现,温度校正后,0.8mm薄带的韧脆转变温度(DBTT)与标准冲击试样基本相同,表明采用本文的低温冲击试验方法进行薄带韧脆转变温度测定是可行的;铸轧薄带的韧脆转变温度比磷含量相同的常规薄带低大约10℃。

Abstract

In the present work, a new low temperature impacting test method for nonstandard sample was made. The increase of temperature for the 0.8mm strip steel in low temperature impacting test was computed and the impact temperature for the strip was corrected by using the finite element method. Impacting toughness for the conventional and cast strip nonstandard samples was contrastively investigated by using the low temperature impacting test method in this paper. The results show that ductile-brittle transition temperature (DBTT) for the 0.8mm strip containing 0.08% P corresponded to that for standard sample, indicating that it was feasible to measure DBTT by using the low temperature impacting test in this paper; The ductile-brittle transition temperatures (DBTT) for the cast strips were measured to be lower by about 10℃ than those for the conventional strips with equal P contents.

关键词

铸轧薄带 / / / 有限元法 / 低温冲击 / 韧脆转变温度

Key words

casting strip / phosphorous / steel / finite element method / low temperature impacting / ductile-brittle transition temperature

图表

引用本文

导出引用
周国平 王彬 陈 俊 刘振宇 邱以清 王国栋. 铸轧高磷耐候钢薄带低温冲击韧性[J]. 物理测试, 2010, 28(2): 10-10
Guoping Zhou . Low Temperature Impacting Ductility for High Phosphorous Steel Cast Strip[J]. Physics Examination and Testing, 2010, 28(2): 10-10

5

Accesses

0

Citation

Detail

段落导航
相关文章

/