投审稿入口

武钢8号高炉炉前技术改进措施及效果

Actions of tapping technology improvement in WISCO No.8 BF

  • 摘要: 对武钢8号高炉2024年炉前出铁数据进行系统性分析,找出了出铁过程存在的问题,采用高炉储铁模型进行系统性量化分析,确定炉前技术改进方向。通过采取“零间隔”出铁模式、合理增加出铁次数、倒铁口预打泥操作、三铁口连续出铁模式、加强炉前铁口维护、炉前设备精细化管理等改进措施,随着出铁间隔时间的减少,见渣率从90%左右提高到100%左右,有效出铁时间占比从低于80%提高到97%以上,实现了均匀出净渣铁,使得炉缸工作状态更加稳定,为高炉稳定顺行和降本增效奠定了坚实基础。

     

    Abstract: The problems occurred in the tapping process are located through systematically analyzing the tapping data of WISCO No.8 blast furnace in 2024,and a systematic quantitative analysis is carried out through a reserved hot metal model to trace the improvement direction of the tapping technologies.By taking the actions,such as implementing " zero-interval" tapping mode,increasing the tapping frequency,pre-gunning mud for taphole switchover,continuously tapping from three tapholes alternatively,strengthening taphole maintenance,and exercising delicacy management of casthouse equipment,the rate of slag tapping time and hotmetal tapping time rises from 90% to about 100%,and the effective hot metal tapping time rate steps up from less than 80% to over 97% as the result of shorter tapping interval.The furnace achieves uniform and adequate tapping,and the hearth works in a more stable condition,which underpin smooth running and cost reduction of blast furnace.

     

/

返回文章
返回