投审稿入口

新钢9号高炉低品位高铝渣条件下低硅冶炼措施

Measures for low silicon smelting of Xinsteel No.9 BF facing low-grade iron ore and high-alumina slag

  • 摘要: 为降低吨铁成本,新钢9号高炉在低品位高铝渣条件下,基于硅的还原-氧化热力学及动力学,开展低硅冶炼攻关。采取了一系列的措施,包括:(1)降低焦比,提高煤比,以减少SiO2入炉量;(2)将铁水温度降低至1500~1515℃;(3)提高炉顶压力至(230±2) kPa以抑制SiO2还原;(4)调整炉渣二元碱度为1.25~1.29,并将镁铝比控制在0.47~0.50;(5)将高炉利用系数稳定在2.78~2.92t/(m3·d);(6)通过上下部调剂,优化高炉煤气流分布。通过采取以上措施,高炉铁水Si降低至0.30%~0.40%,实现了低硅冶炼,炉况稳定性大幅度改善。

     

    Abstract: Facing low-grade iron ore and consequent high-alumina slag generated,Xinsteel launches a low-silicon smelting campaign in its No.9 blast furnace based on the mechanism of thermodynamics and kinetics of silicon reduction and oxidation with aim of reducing the hot metal production cost.The measures taken in the campaign include:(1) reducing SiO2 input by lowering coke rate and heightening coal rate;(2) decreasing hot metal temperature to 1500-1515 ℃;(3) inhibiting SiO2reduction by increasing top pressure to(230±2) kPa;(4) adjusting slag composition to a binary basicity of 1.25-1.29,and controlling(MgO)/(Al2O3) ratio at the range of 0.47-0.50;(5) stabilizing the blast furnace productivity at 2.78-2.92 t/(m3·d);(6) optimizing gas flow distribution by conditioning the burden distribution and blasting system.As a result of the above measures,Si content in the hot metal falls to 0.30%-0.40%,signifying successful low silicon smelting;and the stability of furnace operation conditions improves significantly.

     

/

返回文章
返回